PT100 Platinum Resister Temp Probe Temperature Sensor 2 wires/1 Meter
- Model number: FTARP05 series
- Mounting form Polish rod probe
- The Probe material: Stainless steel
- Probe diameter: 4mm
- Length of the probe: 30mm
- Cabel material Silver plated copper (not insulated), PTFE Silver plated copper (Waterproof, insulated)
- Accuracy ±(0.3°C+0.5%|t|)
- Thermal response time: <0.5s
AM312 Mini Infrared Human Motion Sensor
- Operating voltage: DC 2.7-12V;
- Static power consumption: <0.1mA;
- Delay time: 2 seconds;
- Block time: 2 seconds;
- Trigger mode: repeatable;
- Sensing range: ≤ 100 degrees cone angle, 3-5 meters; (according to the specific lens)
- Working temperature: -20 – + 60 ℃
- Module lens: a small lens
KY-022 Infrared Receiver Module for Arduino
- Dimension: 2.5 x 1.5 x 1.5 cm.
- Receiving angle: 90 °.
- Working voltage: 2.7 ~ 5.5V.
- Frequency: 37.9KHz
- Receiving range: 18m.
- Weight: 4 gm.
L298N 5V Motor Driver Board-Red
- Module name : dual H bridge motor drive module
- Work mode : H bridge drive
- Main control chip : L298N
- Logical voltage : 5V
- Drive voltage : 5v-35v
- Logical current : 0mA-36mA
- Driving current : 2A(MAX single bridge)
ULN2003 Driver Board Stepper Motor-Green
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
28BYJ-48 5V 4-Phase Stepper Motor
- Rated voltage: 5V DC
- Reduction Ratio: 64:1
- Step Angle: 5.625° /64
- Frequency: 100Hz
- Self-positioning Torque: >34.3mN.m
- Friction torque: 600-1200 gf.cm
- Pull in torque: 300 gf.cm
KY-012 Active Buzzer Module
- Operating Voltage– 3.5V – 5.5V
- Maximum Current– 30mA @ 5VDC
- Resonance Frequency– 2.5kHz ±300Hz
- Minimum Sound Output– 85Db @ 10cm
- Working Temperature– -20°C to 70°C
- Storage Temperature– -30°C to 105°C
- Dimensions– 18.5 x 15mm
60W 220V Adjustable Temperature Electric Soldering iron
- Soldering iron length: 2.5 inches (6.5 cm)
- Power: 60W
- 70% lower power consumption compared to ordinary soldering irons
- Thermostat circuit with temperature adjustable range between 200 – 450°C (392 – 842°F)
AT24C256 I2C Interface EEPROM Memory Module
- Chipset : AT24C256.
- Operating Temperature: -55°C to 125°C.
- Storage Temperature: -65°C to 150°C.
- The voltage on Any Pin with respect to the ground: -1.0V to 6.25V.
- Maximum Operating Voltage: 6.25V DC.
2.4 inch SPI Touch Screen Module TFT Interface 240*320 with Touch
- It is a 2.4inch SPI TFT LCD Screen Module
- 10pins interface.
- The LCD driver ic is ILI9341.
- It’s a 240 * 320 (resolution)
2.2 inch LCD color screen TFT SPI serial interface 240*320 module compatible with 5110
- Display Size: 2.2″
- Driver IC: ILI9341
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 240×320
- Interface Type: SPI
- Easy to expand the experiment with SD card slot
ESP-WROOM-32 ESP 32S WIFI Bluetooth Development Board (CP2102 + 30PIN + Micro)
- Processor Brand: Espressif
- Processor Speed: 4 GHz
- Processor Count: 2
- Connectivity Type: Bluetooth, Wi-Fi
- Wireless Type: Bluetooth
- Included Components: 1 XESP32 ESP-32 ESP-32S ESP 32 Development Board CP2102 WiFi Bluetooth Ultra-Low Power Consumption Dual Core (30 PIN)
TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino
- 4-digit 7-segment LED display showing numbers (0-9) and some letters (A, B, C, etc.).
- Managed by TM1637 driver chip for simplified interfacing.
- Uses I2C protocol with only two wires (SDA and SCL) to connect to the microcontroller.
- Compact design with 0.36-inch digit height per segment.
0.96 Inch I2C/IIC 4pin OLED Display Module (BLUE)
- Display size: 0.96″
- Resolution radio:128 x 64
- Interface modes: I2C/IIC
- Working voltage: 3.3V
- Control Chip: SSD1306
- It offers bright colors and clear images.
KY-005 Infrared Transmit Sensor Module
- This is 38KHz Infrared IR transmitter sensor module For Arduino
- Transmit 38KHz modulating signal
- Suitable for Arduino DIY project
- Material: PCB
5V HC-SR04 Ultrasonic Sensor 4pin
- Affordable Price
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 kHz
Official 7Semi INA240A2 4~80V Bidirectional Current Sense Amplifier Breakout, 50V/V Gain
- Fixed 50 V/V gain for accurate current measurement
-
Wide common-mode voltage range: –4V to 80V
-
Bidirectional current sensing support
-
Enhanced PWM rejection for noisy environments
-
Ideal for motor drives and power systems
-
Compact breakout for easy prototyping
Official 7Semi NEO-M9N GPS Breakout, Precision GNSS Positioning
-
High-precision multi-GNSS GPS breakout module
-
Supports GPS, GLONASS, Galileo, and BeiDou
-
Fast position update rate up to 25 Hz
-
3.3V operating voltage
-
I2C and UART communication interfaces
-
Low power consumption for battery-powered projects
-
Compact design for space-constrained applications
-
Ideal for drones, robotics, navigation, and IoT tracking
Official 7Semi DS18B20 Waterproof Temperature Sensor Probe 1m Cable
-
Temperature threshold programmable and non-volatile
-
Sensor type local
-
Single measurement channel
-
Supports parasite power
-
1-Wire communication interface
-
Accuracy ±0.5°C
-
Supports multiple devices on the same bus
-
Temperature resolution selectable 9, 10, 11, or 12 bits
-
Operating temperature range from −55°C to +125°C
INA240 Current Detection Amplifier Current Voltage Monitoring Bidirectional Module
- Wide -4V to 80V common-mode range
- Enhanced PWM suppression
- 200V/V fixed gain
- Analog voltage output
- Ideal for motor & solenoid control
