AT24C256 I2C Interface EEPROM Memory Module
Original price was: ₹120.00.₹58.00Current price is: ₹58.00. (Excl. 18% GST)
Price (Excl. GST): ₹58.00
Price (Incl. GST): ₹68.44
- Chipset : AT24C256.
- Operating Temperature: -55°C to 125°C.
- Storage Temperature: -65°C to 150°C.
- The voltage on Any Pin with respect to the ground: -1.0V to 6.25V.
- Maximum Operating Voltage: 6.25V DC.
| Weight | 5 g |
|---|---|
| Dimensions | 37 × 12 × 12 mm |
6 in stock
Out of stock
Out of stock
Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product. Product Images are shown for illustrative purposes only and may differ from the actual product.
The AT24C256 I2C Interface EEPROM Memory Module is an excellent choice for expanding data storage on an Arduino. While the ATmega chip on the Arduino has a limited amount of built-in EEPROM memory, this external module connects via the I2C bus and offers an easy way to increase storage capacity. The module features a pluggable EEPROM chip, so you can easily upgrade to a higher capacity by swapping the chip.
The AT24C256 module uses EEPROM chips from the AT24C series and provides a storage capacity of 256K bits, or 32K bytes. It communicates with the Arduino through the I2C interface and is best used in conjunction with the Arduino Sensor Shield V4.0 and the Arduino I2C COM Cable for optimal integration.
- It can be used as a server or client.
- Directly plug puzzle board, no soldering required.
- Controller: W5100.
- This is the latest version of the Ethernet Shield.
- This Arduino Ethernet Shield which is based on the Wiznet W5100 Ethernet Chip gives you an easy way to get your Arduino Online.
- It is directly supported by Arduino’s official Ethernet Library.
- It adds a micro-SD card slot, which can be used to store files for serving over the network.
- It’s compatible with the Arduino Duemilanove (168 or 328), Uno as well as Mega (1280/2560) and can be accessed using the SD library.
- The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP.
- It supports up to four simultaneous socket connections.
- Use the Ethernet library to write sketches that connect to the internet using the shield.
Features of AT24C256 I2C Interface EEPROM Memory Module:
- Chipset : AT24C256.
- 8P chip seat, installation of AT24C256 chip.
- Pin-powered on-board power indicator.
- I2C communications required pull-up resistor.
- All pins are leads and marked address input and direct write-protect pin jumper settings.
Package Includes:
1 x AT24C256 I2C Interface EEPROM Memory Module.
Leave a Reply