ESP32 OLED Module for WiFi and Bluetooth
- NodeMcu ESP32 OLED Module
- Three modes: AP, STA, and AP+STA
- Support for Lua program, easy to develop
- 2.4 GHz dual-mode WiFi and Bluetooth
- Pre-integrated with antenna and RF balun
NUCLEO-F030R8 Development Board, STM32 Nucleo-64, STM32F030R8T6 MCU, Arduino Uno & ST Morpho Connectivity
- STM32 microcontroller
- 1 user LED shared with ARDUINO
- 1 user and 1 reset push-buttons
- 32.768KHz crystal oscillator
- Flexible power-supply options: ST-LINK, USB VBUS, or external sources
- On-board ST-LINK debugger/programmer with USB re-enumeration capability
MSP-EXP430FR6989 – MSP430FR6989 LaunchPad Development Kit
-
Based on MSP430FR6989 ultra-low-power FRAM microcontroller
-
Features 128KB FRAM memory for fast, high-endurance data storage
-
Integrated segmented LCD display (up to 320 segments)
-
Onboard XDS110 debugger for programming, debugging, and energy measurements
-
Equipped with LEDs and programmable push buttons for user interaction
-
Supports BoosterPack plug-in modules via 40-pin expansion header
-
Includes onboard emulation – no external debugger required
-
Ideal for low-power applications, energy-harvesting, and sensor systems
-
USB-powered – supports standalone operation with supercapacitor (user-installed)
Mini USB Cable 0.3m
- Color : Blue
- Length (cm) : 30
- USB Type : Type-A to Type-B
- Weight (gm) : 20
360 Degree Trajectory Ball Module Hall Effect Sensor
- Operating Voltage: 2.5-5.25 V
- Operating Temperature:20~70 °C
- Material: Plastic.
- Application: Electronic Circuits.
- Dimensions: 28 x 22 x 8 (LxWxH) mm
- Weight: 2 gm
Arduino UNO DIP R3 Compatible Development Board
- Microcontroller: ATmega328P.
- Operating Voltage: 5V.
- Input Voltage: 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6.
- DC Current: 40mA.
- Flash Memory: 32 KB.
- SRAM: 2 KB.
- EEPROM: 1 KB.
- Clock Speed: 16 MHz.
GP2Y0A21YK0F 10- 80cm IR Distance Sensor + Cable
- Distance measuring range: 10 cm to 80 cm
- Output type: Analog voltage
- Output voltage differential over distance range: 2.05 V (typical)
- Update period: 38 ± 10 ms
3 Channel Path tracing Module
- Working voltage: 5V
- Uses infrared light detection, anti-jamming capability, using CTRT5000 sensor, adjustable sensitivity, stable performance
- With lights, a fixed bolt hole for easy installation
Official LAUNCHXL-F28P55X C2000™ Real-Time MCU LaunchPad™ Development Kit
-
Official TI C2000™ LaunchPad™ for F28P55x real-time microcontrollers
-
Low-cost and developer-friendly evaluation & prototyping board
-
Extended version with extra pins for enhanced connectivity
-
Supports two BoosterPack™ plug-in modules simultaneously
-
Cross-compatible with the TI MCU LaunchPad™ ecosystem
-
Ideal for motor control, digital power, and industrial automation projects
DYP-L06 LPG Gas Real time monitoring Non-invasive Ultrasonic Sensor – IIC (DYP-L062MCW-V1.0)
- Operating voltage: 3.3~5 V DC
- Average operating current: ≤20 mA
- Blind zone: ≤30 mm
- Measurement range: 30~1000 mm
- Power-on working hours: ≤650 ms
- Working period: >750 ms
- Resolution: 1mm
- Normal temperature accuracy:±(5+S*1%)
- Measurable container thickness: 1~5 mm
- Temperature compensation: Support
STM32F030F4P6 core board development board core ARM CORTEX-M0
- Input Voltage: 3.3 V
- Output Voltage: 5-3.3 V
- CPU ARCHITECTURE: RM CORTEX-M0
- MICROPROCESSOR MODEL: STM32F030F4P6
- Dimensions: 48 x 30 x 8 (LxWxH) mm.
- Weight: 7 gm.
GP2Y0A02YK0F 20- 150cm IR Distance Sensor + Cable
- Model- GP2Y0A02YK0F (20 to 150 cm)
- Operating Voltage Range-4.5~5.5V
- Distance measuring range (cm)- 20 ~ 150
- Length (mm)- 44.5
- Width (mm)- 13
- Height (mm)- 21.5
- Weight (gm)- 5
NUCLEO-F767ZI – STM32 Nucleo-144 Development Board with STM32F767ZI MCU, supports Arduino, ST Zio and morpho connect
1. 100% Brand new and high quality STM32 Board
2. Model: STM32F767ZI
3. Core: ARM Cortex-M7 MCU
4. up to 216 MHz clock speed
5. 2 MB Flash, and 512 KB RAM
6. Operating voltage of 3.3 V and temperature range of -40°C to +85°C.
DC 12V 1 Channel Relay Module Infrared IR Remote Switch Control
- Operating Voltage: 12V
- Control Distance: 8m / 314.96 inch
- Operating Temperature: -40 to 90°C
- Material: FR4
- Length: 50mm
- Width: 20mm
- Height: 18mm
- Weight: 30gm
4 Channel Infrared Tracing Module
- Working voltage (V): 3.3 ~ 5
- Working current (A): Above 1A
- Operating Temperature (℃): -10 ~ +50
- Mounting hole: M3
- Detection range: 1mm ~ 60 cm adjustable.
DYP-L06 LPG Gas Real time monitoring Non-invasive Ultrasonic Sensor – UART (DYP-L062MTW-V1.0)
- Operating voltage: 3.3~5 V DC
- Average operating current: ≤20 mA
- Blind zone: ≤30 mm
- Measurement range: 30~1000 mm
- Power-on working hours: ≤650 ms
- Working period: >750 ms
- Resolution: 1mm
- Normal temperature accuracy:±(5+S*1%)
- Measurable container thickness: 1~5 mm
- Temperature compensation: Support
Official MSP-EXP430FR2311 – MSP430FR2311 LaunchPad Development Kit
-
Easy-to-use development board for MSP430FR2311, FR2000 & FR21xx MCUs
-
On-board emulator for programming, debugging, and energy measurement
-
Includes on-board user buttons, LEDs, and optical sensor interface
-
Pre-programmed demo for light sensing and op-amp testing
-
Features 4KB FRAM and ultra-low-leakage TIA (50 pA)
-
Integrated op-amp, ADC, and comparator for smart analog applications
-
20-pin BoosterPack™ headers for easy hardware expansion
-
Ideal for low-power, sensor-based and industrial monitoring solutions
Official 7Semi ADS1115 16bit 4-Channel ADC Board with PGA I2C
-
16-Bit High-Resolution ADC
-
Texas Instruments ADS1115 IC
-
4 Analog Input Channels
-
Integrated Programmable Gain Amplifier (PGA)
-
I2C Interface for Easy Communication
-
Wide Supply Voltage: 2.0V–5.5V
-
Supports 3.3V & 5V Systems
-
Configurable Data Rate: 8–860 SPS
-
Low Power Consumption
-
Single-Ended & Differential Inputs
-
Compact Breakout Board Design
-
Compatible with Arduino, Raspberry Pi & ESP32
LCD1604 Blue Backlight Display – 16×04 LCD Display Module
- HD44780 compatible Driver IC
- Input Voltage: 5V
- Resolution: 16×4 characters
- Backlight Color: Blue
- Pixel Color: White
Official 7Semi INA169 60V 5A Analog DC Current Sensor Breakout
-
Based on Texas Instruments INA169 current-sense amplifier
-
Measures DC current up to 5A
-
Wide input voltage range: 2.7V to 60V
-
Analog output for easy ADC interfacing
-
Low offset voltage and low power consumption
-
Adjustable gain for flexible current sensing
-
Ideal for power monitoring and battery management
