Home » Shop

Showing 61–80 of 684 resultsSorted by price: low to high

KY-035 Analogy Hall Magnetic Sensor

SKU: SEN0023
Original price was: ₹89.00.Current price is: ₹28.50. (Excl. 18% GST)
  1. Supply Voltage(Vcc) – 5 V
  2. Output Current (IO) – 10 mA
  3. Operating Temperature – 40 to 100 Degree Celcius
  4. Can detect both the magnetic poles
Add to cart

KY-019 1 Channel Relay 5V

SKU: COMP0008
Original price was: ₹64.74.Current price is: ₹29.00. (Excl. 18% GST)
  1. Trigger Voltage: 5 VDC
  2. Trigger Current : 20 mA
  3. Maximum Switching Voltage: 250VAC@10A; 30VDC @10A
  4. Single Pole Double Throw (SPDT) Configuration
  5. Power supply indicator lamp
Add to cart

KY-017 Mercury Medallion Module

SKU: COMP0018
Original price was: ₹99.00.Current price is: ₹29.00. (Excl. 18% GST)
  • Economic, Reliable and Small in size
  • Operating voltage 3.2Vdc-5Vdc
  • Output LED light Indicator
  • 3 Pin sensor Module
  • High Sensitivity
Add to cart

3PIN IR Infrared Flame Detection Sensor Module

SKU: SEN0089
Original price was: ₹89.90.Current price is: ₹29.00. (Excl. 18% GST)
  • 1.Can detect the flame or the light with the wavelength at the range of 760 nm to 1100 nm.
  • 2.The detection angle is about 60 degrees,extremelty sensitive to the flame spectrum.
  • 3.Sensitivity is adjustable. (shown in blue digital potentiometer)
  • 4.The comparator output with clean signal,good waveform,strong driving ability of more than 15mA.
  • 5.With an adjustable precision potentiometer to adjust the sensitivity.
  • 6.Operating voltage:3.3V-5V.
  • 7.The output form:DO digital switching outputs (0 and 1).
  • 8.A fixed bolt hole is set for easy installation.
  • 9.Small plates PCB size:3.2cm * 1.4cm.
  • 10.Using LM393 comparator with wide voltage.
Add to cart

3pin Photosensitive Sensor Module Light- Dependent Control LM393

SKU: SEN0092
Original price was: ₹95.00.Current price is: ₹29.00. (Excl. 18% GST)
  • Operating Voltage: 3.3V to 5V
  • Operating Current: 15mA
  • Length: 32mm
  • Width: 14mm
  • Height: 8mm
  • Weight: 3g
Add to cart

12mm 12528 LDR 10- 20K

SKU: SEN0165
Original price was: ₹59.00.Current price is: ₹29.00. (Excl. 18% GST)
  1. Diameter: 12 mm
  2. No. of pins: 2
  3. Type of mounting: PCB Through Hole
  4. Maximum Operating Temperature: +70˚C (Approx.)
  5. Dark resistance: 1-20MΩ
  6. Spectral peak: 560nm
  7. Maximum voltage: 250 VDC
  8. Maximum wattage: 200 mW
  9. Light resistance (10 Lux): 10-20 KΩ
  10. Dark resistance: 2 MΩ
  11. Resistance illumination: 3
  12. Response time: 20ms (Rise), 30ms (Down)
Add to cart

KY-008 650nm Laser sensor Module 6mm 5V

SKU: SEN0005
Original price was: ₹98.00.Current price is: ₹30.40. (Excl. 18% GST)
  1. Voltage: 3.0 V – 5 V.
  2. Driver: APC circuit.
  3. Line length: about 135 mm.
  4. Transmit power: 58mW.
  5. Operating Current: 40mA.
  6. Operating Current: 40mA.
  7. Operating temperature: -36◦C ~ 65◦C
Add to cart

4pin Photosensitive Sensor Module Light- Dependent Control

SKU: SEN0093
Original price was: ₹99.00.Current price is: ₹31.00. (Excl. 18% GST)
  1. LDR module 4 PIN
  2. Operating voltage 3.3V-5V
  3. Signal output indicator light.
  4. LDR module 4 PIN
  5. Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
Add to cart

Transparent Acrylic Case for PS2 Game Joystick Module

SKU: SEN0003
Original price was: ₹150.00.Current price is: ₹31.00. (Excl. 18% GST)
  1. Product: Transparent Acrylic Case
  2. Material: Acrylic
  3. Color: Transparent
  4. Screw size: M3
Add to cart

KY-037 Sound Sensor Module

SKU: SEN0004
Original price was: ₹149.00.Current price is: ₹32.00. (Excl. 18% GST)
  1. Main chip: LM393, Electret condenser microphone
  2. Working voltage: DC 3.3-5V
  3. Induction distance is 0.5M
  4. Signal output Indication
  5. Single channel signal output
  6. The output effective signal is low level.

KY-009 SMD 3 Color LED Module

SKU: COMP0012
Original price was: ₹72.21.Current price is: ₹32.00. (Excl. 18% GST)
  • Operating Voltage: 5V max
  • Forward Current: 20mA ~ 30mA
  • Operating Temperature: -25°C to 85°C [-13°F ~ 185°F]
  • Dimensions: 18.5mm x 15mm [0.728in x 0.591in]
Add to cart

KY-010 Broken Light Module

SKU: SEN0028
Original price was: ₹149.00.Current price is: ₹32.00. (Excl. 18% GST)
  • Model- KY010
  • Sensor Type- Broken Light Blocking Sensor
  • Operating Voltage- 3.3 ~ 5V
  • Dimensions- 18.5mm x 15mm
  • Weight- 5 grams
Add to cart

3.3V Adapter Board for 24L01 Wireless Module

SKU: COM0026
Original price was: ₹47.31.Current price is: ₹32.00. (Excl. 18% GST)
  1. It can be used with NRF24L01 wireless module
  2. Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
  3. Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
  4. Allows for easy connection to nRF24L01+ modules
  5. Small power on SMD LED indicator
Add to cart

SW1801P 3pin Normally open vibration sensor module

SKU: SEN0200
Original price was: ₹80.00.Current price is: ₹32.00. (Excl. 18% GST)
  1. The working voltage of 3.3V-5V.
  2. Using the company’s high-sensitivity vibration switch, the default with SW-18015P vibration sensor.
  3. The comparator output, the signal clean, good waveform, driving ability, more than 15mA
  4. With a fixed bolt hole, easy to install.
  5. The use of wide voltage LM393 comparator.
Add to cart

YL-99 Impact Switch Module

SKU: SEN0021
Original price was: ₹193.00.Current price is: ₹33.00. (Excl. 18% GST)
  1. Type: Vibration Sensors
  2. Output: Switching Transducer
  3. Dimensions: 25 x 14 x 6 (LxWxH) mm
  4. Weight: 3 gm
  5. Current Rating: 2 A
  6. Voltage Rating: 125 VAC
Add to cart

Robot Smart Car Wheel Tyre Grade B

SKU: ROBO0012
Original price was: ₹89.00.Current price is: ₹33.00. (Excl. 18% GST)
  1. Tire with sponge liner for more strength
  2. With upgraded tire tread for greater friction
  3. New design wheel for better combination with the motor
  4. Diameter: 65 mm
  5. Width : 28 mm
  6. The material of Wheel: High-strength plastic
  7. The material of Tyre: Rubber
  8. Color: Yellow
Add to cart

TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino

SKU: DIS0036
Original price was: ₹99.00.Current price is: ₹34.00. (Excl. 18% GST)
  • 4-digit 7-segment LED display showing numbers (0-9) and some letters (A, B, C, etc.).
  • Managed by TM1637 driver chip for simplified interfacing.
  • Uses I2C protocol with only two wires (SDA and SCL) to connect to the microcontroller.
  • Compact design with 0.36-inch digit height per segment.
Add to cart

IIC/I2C PCF8574 Serial Interface Adapter Module

SKU: COMP0019
Original price was: ₹92.25.Current price is: ₹34.00. (Excl. 18% GST)
  1. 5V power supply.
  2. Serial I2C control of LCD display using PCF8574.
  3. Backlight can be enabled or disabled via a jumper on the board.
  4. Contrast control via a potentiometer.
  5. Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing
Add to cart

KY-023 PS2 Game Joy Stick Module

SKU: SEN0002
Original price was: ₹158.00.Current price is: ₹34.00. (Excl. 18% GST)
  • Working voltage :5V DC
  • Axis : X & Y
  • Type: Button Joystick
  • Size:  65.1×53.8 mm
  • Weight: 37g
Add to cart

TCRT5000 Infrared Reflective Photoelectric Switch

SKU: SEN0082
Original price was: ₹120.00.Current price is: ₹34.00. (Excl. 18% GST)
  • Test reflection distance: 1mm to 25mm
  • The working voltage of 3.3V to 5V
  • Output form: digital switch output (0 and 1)
  • Has a fixed bolt hole, convenient installation
Add to cart