KY-032 IR Obstacle Avoidance Sensor Module
SKU:
SEN0010
Original price was: ₹424.00.₹58.90Current price is: ₹58.90. (Excl. 18% GST)
- Detection distance: 2-40cm
- IO Interface: 4-wire interfaces (- / + / S / EN)
- Output signal: TTL level
- Adjustment: adjust multi-turn resistance
- Effective angle: 35 °
KY-031 The Knock Sensor Module
SKU:
SEN0027
Original price was: ₹250.00.₹35.00Current price is: ₹35.00. (Excl. 18% GST)
- Detect shocks with the spring and send a signal to Controller Board
- Operating voltage: 3.3V-5V
- Digital output
- Bolt holes for easy installation.
KY-026 The Flame Sensor Module
SKU:
SEN0012
Original price was: ₹99.00.₹39.00Current price is: ₹39.00. (Excl. 18% GST)
- Comparator chip LM393 makes module readings stable.
- Operating voltage 3.3V-5V.
- Fast Response Time
- Sensitivity adjustable
- Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
- Detection range: up to 100 cm.
- Adjustable detection range.
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
KY-024 Linear Magnetic Hall sensor
SKU:
SEN0013
Original price was: ₹99.00.₹39.00Current price is: ₹39.00. (Excl. 18% GST)
- Operating Voltage: 3.3V-5V
- Features wide range voltage comparator LM393
- Adjustable sensitivity
- Signal output indicator with the retaining bolt hole, convenient installation
- Output form digital switch output (0 and 1 high and low level)
- The output effective signal is low level
- When there is sound, outputs low level and the signal light
KY-018 Photosensitive Resistor Sensor Module
SKU:
SEN0022
Original price was: ₹96.00.₹28.00Current price is: ₹28.00. (Excl. 18% GST)
1. This module is a high-quality photosensitive sensor module designed to detect light, ideal for use with Arduino projects.
2. It utilizes a photosensitive resistor for light detection.
3. The resistance of the photoresistor typically measures less than 80 Ohms when exposed to full light.
4.In complete darkness, the dark resistance typically exceeds 20 Mega Ohms.
KY-013 Analog Temperature Module
SKU:
SEN0025
Original price was: ₹89.00.₹25.00Current price is: ₹25.00. (Excl. 18% GST)
- Operating Voltage: 5v.
- Temperature measurement range: -55°C to 125°C.
- Measurement Accuracy: ±0.5°C
- Analog Temperature Sensor Module for Arduino
- High Efficiency
- It Suits Most Users in Different Environments
KY-008 650nm Laser sensor Module 6mm 5V
SKU:
SEN0005
Original price was: ₹98.00.₹30.40Current price is: ₹30.40. (Excl. 18% GST)
- Voltage: 3.0 V – 5 V.
- Driver: APC circuit.
- Line length: about 135 mm.
- Transmit power: 58mW.
- Operating Current: 40mA.
- Operating Current: 40mA.
- Operating temperature: -36◦C ~ 65◦C
KY-005 Infrared Transmit Sensor Module
SKU:
SEN0026
Original price was: ₹79.00.₹25.00Current price is: ₹25.00. (Excl. 18% GST)
- This is 38KHz Infrared IR transmitter sensor module For Arduino
- Transmit 38KHz modulating signal
- Suitable for Arduino DIY project
- Material: PCB
KY-001 DS18B20 Temperature Sensor Module
SKU:
SEN0024
Original price was: ₹208.05.₹69.00Current price is: ₹69.00. (Excl. 18% GST)
- Digital signal output
- 18B20 Temperature Sensor Chip
- Resolution adjustment ranges from 9-12 bytes.
- Send data via a pin
- Temperature measurement ranges: -55°C to +125°C, be accurate to 0.5°C.
KY-040 Rotary Encoder Module for Arduino
SKU:
SEN0008
Original price was: ₹230.00.₹45.00Current price is: ₹45.00. (Excl. 18% GST)
- Model : KY-040.
- Type : Incremental Encoder.
- Cycles per revolution (CPR) : 20.
- Working voltage : 0 – 5V.
- Material : PCB + Brass.
- Mounting Nut Thread diameter: 6.6mm
- Weight : 10 gm.
4pin Photosensitive Sensor Module Light- Dependent Control
SKU:
SEN0093
Original price was: ₹99.00.₹31.00Current price is: ₹31.00. (Excl. 18% GST)
- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
HC-SR501 PIR Motion Sensor Module
SKU:
SEN0029
Original price was: ₹120.00.₹55.00Current price is: ₹55.00. (Excl. 18% GST)
- Wide Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Angle: <140°
- Detection Distance: 3 to 7m (can be adjusted)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
Weighing Load Cell Sensor 5kg YZC-131 With Wire
SKU:
SEN0109
Original price was: ₹610.00.₹171.00Current price is: ₹171.00. (Excl. 18% GST)
- Model: YZC-131A
- Dimensions: 75 x 13 x 13 mm (L x W x H)
- Range: 5 kg
- Cable Length: 18 cm
- Fitting ScrewHole Size: M3
- Rated output: 1.0 0.1mV / V
- Nonlinear: 0.05% F.S
- Hysteresis: 0.0% F.S
- Repeatability: 0.05% F.S
Weighing Load Cell Sensor 1Kg for Electronic Kitchen Scale YZC-131 With Wires
SKU:
SEN0107
Original price was: ₹321.21.₹129.80Current price is: ₹129.80. (Excl. 18% GST)
- Weighing Range: 0 ~ 1 kg.
- Rated Output: 1.0 ± 0.1mV / V.
- Non Linear Output: ± 0.03% F.S.
- Input Impedance: 1066 ± 10% Ω.
- Output Impedance: 1000 ± 10% Ω.
- Insulation Resistance: 2000 MΩ.
MQ-135 Air Quality Sensor Detection Module
SKU:
SEN0051
Original price was: ₹166.83.₹95.58Current price is: ₹95.58. (Excl. 18% GST)
- Sensitivity to Ammonia, Sulphide and Benzene steam
- Sensitive for benzene, alcohol, smoke
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
- Output voltage boosts along with the concentration of the measured gases increases.
Soil Moisture Detection Humidity Sensor Module(5pin Dupond wire )
SKU:
SEN0060
Original price was: ₹139.00.₹42.00Current price is: ₹42.00. (Excl. 18% GST)
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
- Operating Voltage: 3.3V~5V
NUCLEO-F767ZI – STM32 Nucleo-144 Development Board with STM32F767ZI MCU, supports Arduino, ST Zio and morpho connect
SKU:
DEV0046
Original price was: ₹9,199.00.₹3,750.00Current price is: ₹3,750.00. (Excl. 18% GST)
1. 100% Brand new and high quality STM32 Board
2. Model: STM32F767ZI
3. Core: ARM Cortex-M7 MCU
4. up to 216 MHz clock speed
5. 2 MB Flash, and 512 KB RAM
6. Operating voltage of 3.3 V and temperature range of -40°C to +85°C.
DHT22 Digital Temperature and Humidity Sensor Module
SKU:
SEN0071
Original price was: ₹299.00.₹151.00Current price is: ₹151.00. (Excl. 18% GST)
- Measuring range: temperature -40-80 ℃; humidity 0; 99.9%RH
- Measurement accuracy (25℃): temperature: + 0.5; humidity: + 2%RH (10; 90%RH)
- Resolution: temperature: 0.1 ℃, humidity: 0.1%RH
- Attenuation value: temperature: <1℃ / year; humidity: < 1%RH/ years
- High precision
- Capacitive type
- Full range temperature compensated
- Relative humidity and temperature measurement
- Calibrated digital signal
- Outstanding long-term stability
DHT11 Temperature And Humidity Sensor Module with LED
SKU:
SEN0070
Original price was: ₹139.00.₹50.00Current price is: ₹50.00. (Excl. 18% GST)
- Input Supply voltage (VDC): 3.3 ~ 5
- Supply Current (mA): measurement 0.3mA standby 60μA.
- Temperature measurement range: 0~50 degrees
- Temperature measurement error: ±2 degrees
- Humidity measurement range: 20%~95%RH
- Humidity measurement error: ±5%RH
MPU-6050 3-Axis Accelerometer and Gyro Sensor
SKU:
SEN0102
Original price was: ₹399.00.₹139.00Current price is: ₹139.00. (Excl. 18% GST)
- Chip built-in 16bit AD converter, 16-bit data output
- Driver Chip: MPU6050
- Operating Voltage: 3-5V DC
- Communication: I2C/IIC Protocol
- Gyro Range: ± 250, 500, 1000, 2000 °/s
- Accelerometer Range: ± 2 ± 4 ± 8 ± 16 g
