Official xG26-DK2608A EFR32xG26 IoT Dev Kit Silicon Labs XG26 + 10 DBM DEV KIT (BRD2608A)
- Based on EFR32xG26 2.4 GHz Wireless SoC
- +10 dBm, 1536 kB flash, 256 kB RAM, 6×6 QFN48
- Secure Vault High
- AI/ML Hardware Accelerator
- Packet Trace Interface (PTI)
- Virtual COM Port
- On-board SEGGER J-link Debugger Supporting
- External Device Debugging
- User LED and Pushbuttons
- Si7021 RHT Sensor
- Intertial Sensor
- Stereo Microphones
- Pressure Sensor
- Ambient Light Sensor
- Hall-effect Sensor
- CR2032 Coin Cell Battery Support
Official Silicon Labs EFR32xG26 Explorer Kit (xG26-EK2709A) (BRD2709A)
- Based on EFR32xG26 2.4 GHz Wireless SoC
- +10 dBm, 1536 kB flash, 256 kB RAM, QFN48
- Two LEDs and two push buttons
- Reset button
- USB connector for power and debug connection
- On-board SEGGER J-Link debugger
- Virtual COM port
- Packet Trace Interface (PTI)
- Breakout pads for GPIO access and connection to external hardware
- Third-party add-on connectors
- mikroBUS socket
- Qwiic® connector
Official MSP-EXP430FR2355 – MSP430FR2355 LaunchPad Development Kit
-
Powered by MSP430FR2355 ultra-low-power Value Line MCU
-
Includes 32KB FRAM & 4KB SRAM for flexible memory allocation
-
On-board debug probe for easy programming and energy measurement
-
Features 12-bit ADC, DACs, PGAs & enhanced comparators (eCOMPs)
-
Smart Analog Combo for advanced signal chain prototyping
-
Ambient light sensor & external analog connector included
-
Two user-programmable buttons and two LEDs
-
Ideal for data logging, sensor applications, and low-power systems
-
24MHz operation for faster processing in energy-constrained applications
-
Compatible with TI’s Code Composer Studio™ and IAR Embedded Workbench
Texas Instruments LAUNCHXL-F28379D – C2000 Delfino MCUs F28379D LaunchPad Development Kit
-
Low-cost development kit for TMS320F2837xD, F2837xS, and F2807x microcontrollers
-
Part of TI’s C2000™ MCU LaunchPad™ ecosystem
-
Supports connection of two BoosterPack™ plug-in modules
-
Features powerful dual-core ARM Cortex-M4F architecture
-
Integrated on-board USB JTAG emulator for programming and debugging
-
Ideal for real-time control, motor control, industrial automation, and power electronics
-
Enables rapid prototyping with standardized headers and expansion options
-
Compatible with Code Composer Studio and other TI tools
Official MSP-EXP430FR5994 – MSP430FR5994 LaunchPad Development Kit
-
Ultra-low-power LaunchPad™ kit with MSP430FR5994 16-bit MCU
-
Features 256KB FRAM & 8KB SRAM for high-speed, non-volatile storage
-
Includes microSD card holder & super capacitor for standalone apps
-
On-board debugger for easy programming & real-time debugging
-
Supports vector math via Low-Energy Accelerator (LEA)
-
User-programmable buttons and LEDs for interactive testing
-
40-pin BoosterPack™ headers for easy hardware expansion
-
USB interface for PC connectivity and power
-
Ideal for low-power IoT, sensor nodes, and data logging projects
-
Supported by Code Composer Studio™ and Energia IDE
Official EK-TM4C129EXL – ARM Cortex-M4F TM4C129E Connected LaunchPad Evaluation Kit
-
Based on ARM® Cortex-M4F TM4C129ENCPDT MCU
-
Features hardware crypto accelerators for secure data processing
-
Supports 10/100 Ethernet MAC + PHY for fast network connectivity
-
Includes USB 2.0 Host/Device/OTG support
-
Comes with on-board debugger and emulator
-
Integrated motion control PWM and hibernation module
-
Ideal for secure cloud communication using TLS/SSL (WolfSSL support)
-
Out-of-the-box demo connects securely to Exosite cloud
-
Runs on TI-RTOS for real-time embedded applications
-
Expansion via BoosterPack™ headers
-
Perfect for IoT, smart grid, industrial automation, and control systems
Official MSP-EXP430FR2311 – MSP430FR2311 LaunchPad Development Kit
-
Easy-to-use development board for MSP430FR2311, FR2000 & FR21xx MCUs
-
On-board emulator for programming, debugging, and energy measurement
-
Includes on-board user buttons, LEDs, and optical sensor interface
-
Pre-programmed demo for light sensing and op-amp testing
-
Features 4KB FRAM and ultra-low-leakage TIA (50 pA)
-
Integrated op-amp, ADC, and comparator for smart analog applications
-
20-pin BoosterPack™ headers for easy hardware expansion
-
Ideal for low-power, sensor-based and industrial monitoring solutions
Official MSP-EXP430FR4133 MSP430FR4133 LaunchPad™ series – MCU 16-Bit Embedded Evaluation Board
-
Based on MSP430FR4133 ultra-low-power microcontroller with FRAM memory
-
Includes onboard segmented LCD display for real-time interface
-
Features 10-bit ADC, programmable buttons, and user LED
-
Integrated onboard debugger for programming and energy measurement
-
Out-of-the-box stopwatch and temperature sensing demo included
-
Supports 20-pin BoosterPack™ plug-in modules for expansion
-
Perfect for data logging, embedded sensing, and IoT development
-
Operates efficiently in battery-powered and energy-harvesting applications
Official MSP430FR2476 LaunchPad Development Kit
-
Based on MSP430FR2476 ultra-low-power MCU
-
Features 64KB embedded FRAM and 8KB SRAM
-
Includes on-board debug probe for programming & energy measurement
-
Supports real-time data logging and sensing applications
-
Onboard 2 programmable buttons and 2 LEDs (1 RGB)
-
Integrated analog temperature sensor
-
CR2032 battery holder for standalone applications (battery not included)
-
16 MHz clock speed with flexible memory allocation
-
Compatible with BoosterPack™ plug-in modules
-
Ideal for value-line sensing, portable, and energy-efficient applications
MSP-EXP430FR6989 – MSP430FR6989 LaunchPad Development Kit
-
Based on MSP430FR6989 ultra-low-power FRAM microcontroller
-
Features 128KB FRAM memory for fast, high-endurance data storage
-
Integrated segmented LCD display (up to 320 segments)
-
Onboard XDS110 debugger for programming, debugging, and energy measurements
-
Equipped with LEDs and programmable push buttons for user interaction
-
Supports BoosterPack plug-in modules via 40-pin expansion header
-
Includes onboard emulation – no external debugger required
-
Ideal for low-power applications, energy-harvesting, and sensor systems
-
USB-powered – supports standalone operation with supercapacitor (user-installed)
Official EK-TM4C1294XL – ARM Cortex-M4F TM4C1294 Connected LaunchPad Evaluation Kit
-
Based on TI TM4C1294NCPDT ARM Cortex-M4F microcontroller
-
120 MHz clock speed for high-performance applications
-
Integrated 10/100 Ethernet MAC + PHY for connected applications
-
Features USB 2.0 OTG, UART, I2C, SPI, and CAN interfaces
-
On-board debug via ICDI (In-Circuit Debug Interface)
-
Includes 2 user buttons and 2 user LEDs
-
BoosterPack-compatible for easy expansion
-
Low-power operation suitable for real-time control systems
-
Ideal for IoT, networking, and embedded system development
-
Supported by TI’s TivaWare™ SDK and Code Composer Studio™
MSP-EXP430FR2433 – LaunchPad Development Kit (with Sensing MCU, LaunchPad, BoosterPack Connector)
- ULP FRAM technology based MSP430FR2433 16-bit MCU
- EnergyTrace Technology available for ultra-low-power debugging
- 20-pin LaunchPad kit standard leveraging the BoosterPack ecosystem
- On-board eZ-FET debug probe
- 2 buttons and 2 LEDs for user interaction
LAUNCHXL-F2800157 – C2000 MCU F2800157 LaunchPad Development Kit
- Microcontroller: TMS320F2800157
- Clock Speed: 120 MHz
- Debugger: XDS110 Onboard
- Connectivity: USB, GPIO, BoosterPack headers
- Operating Voltage: 3.3V / 5V compatible
LAUNCHXL-F28069M Piccolo F28069 MCU, InstaSPIN-MOTION & InstaSPIN-FOC, Motor Control
-
Support for InstaSPIN-FOC and InstaSPIN-MOTION
-
USB-powered development environment
-
On-board JTAG emulator for easy debugging
-
Compatible with multiple TI BoosterPacks
-
Designed for sensorless field-oriented control of PMSM, ACIM, and BLDC motor
Digi ConnectCore® MP133 STM32MP133C with Arm® Cortex®-A7 Development Kit – 602-CC-WMP133-KIT-ND (included Dev Board)
- Gigabit Ethernet + 10/100 Mbit Ethernet
- (2) USB Host, 1 x USB OTG
- (2) CAN-FD
- MicroSD card
- PCIe minicard with SIM card holder
- MikroE Click boards™ connector
- Console over USB
- Digi XBee (including Digi XBee Cellular support)
- Audio (microphone and headphones)
- User buttons and LEDs
Raspberry Pi 5MP Camera R1.3 Module with Cable
- Resolution: 5 MP
- Interface Type: CSI(Camera Serial Interface)
- Dimensions: 25x23x8 (LxWxH) mm
- Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
- Fully Compatible with Raspberry Pi 3 and 4 Model B
- Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
NUCLEO-U385RG-Q STM32 Nucleo-64 Development Board with STM32U385RG, Supports Arduino and ST Morpho Connectivity
- STM32 microcontroller in an LQFP64 or LQFP48 package
- 1 user LED shared with ARDUINO®
- 1 user and 1 reset push-buttons
- 32.768 kHz crystal oscillator
- Board connectors:
- ARDUINO® Uno V3 expansion connector
- ST morpho extension pin headers for full access to all STM32 I/Os
- Flexible power-supply options: ST-LINK USB VBUS or external sources
- Comprehensive free software libraries and examples available with the STM32Cube MCU Package
- Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE
PICKIT3 USB Programmer, Debugger, and Emulator Controller Development Board
- Type: Debugger/Programmer
- Tool/Board Application: Debugging/Programming
- MCU Supported Families: Flash-based PIC MCUs
- Core Architecture: PIC, dsPIC
SIM 900A GSM GPRS Modem TTL with Antenna
- The onboard two set power supply interface VCC5 5V power supply, VCC4 interface, 3.5–4.5V power supply, optional power on self starting (default) and control start.
- The onboard SMA (default) and IPX mini antenna interface, SIM900A interface reserved reset.
- The size of the module is 49*50, all the new and original device.
- The computer can give early computer debugging USB module power supply,
a very large amount of data under the condition of the recommended current more than 1A. - Standby dozens of MA data can be set to provide dormancy, dormancy of 10MA low power.
- The serial port circuit: support for 3.3V single chip microcomputer.
SIM 800C GSM GPRS Modem TTL with Antenna
- Chip: SIM800C
- Quad-Band: 850/900/1800/1900 MHz
- Class 4 (2 W @ 850/900 MHz)
- Class 1 (1 W @ 1800/1900 MHz)
- FM: 76 ~ 109 MHz bands in all world (50 KHz step)
- Sensitivity: <-105dB
- SIM supports:2G, 3G, 4G
- Supply voltage: 5-9VDC
- Standby current: 3mA
- Operating temperature: -40 ~ +85C
