Official xG26-DK2608A EFR32xG26 IoT Dev Kit Silicon Labs XG26 + 10 DBM DEV KIT (BRD2608A)
Original price was: ₹15,999.00.₹10,499.00Current price is: ₹10,499.00. (Excl. 18% GST)
Price (Excl. GST): ₹10,499.00
Price (Incl. GST): ₹12,388.82
- Based on EFR32xG26 2.4 GHz Wireless SoC
- +10 dBm, 1536 kB flash, 256 kB RAM, 6×6 QFN48
- Secure Vault High
- AI/ML Hardware Accelerator
- Packet Trace Interface (PTI)
- Virtual COM Port
- On-board SEGGER J-link Debugger Supporting
- External Device Debugging
- User LED and Pushbuttons
- Si7021 RHT Sensor
- Intertial Sensor
- Stereo Microphones
- Pressure Sensor
- Ambient Light Sensor
- Hall-effect Sensor
- CR2032 Coin Cell Battery Support
| Weight | 100 g |
|---|---|
| Dimensions | 240 × 120 × 50 mm |
1 in stock
5 in stock
Out of stock
Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product. Product Images are shown for illustrative purposes only and may differ from the actual product.
The xG26-DK2608A EFR32xG26 Dev Kit is a low-cost, small form factor development and evaluation platform for the EFR32MG26 Wireless Gecko System-on-Chip.
The board is a small and cost-effective, feature-rich, prototype and development platform based on the EFR32™ Wireless Gecko System-on-Chip. The xG26 Dev Kit is an ideal platform for developing energy-friendly connected IoT devices. The xG26 Dev Kit ships with a Bluetooth demo that works with a cloud-connected smartphone app, showcasing easy collection of environmental and motion sensor data. A built-in SEGGER J-Link debugger ensures easy debugging through the USB Type-C connector.
The xG26 Dev Kit (OPN: xG26-DK2608A) has been designed to inspire customers to make battery-operated IoT devices with the Silicon Labs EFR32MG26 Wireless Gecko System-on-Chip. The highlights of the board include five different environmental sensors, stereo I2S microphones, and a dedicated ADC U.FL connector and precise voltage reference, all accessible to the EFR32MG26 wireless MCU. The peripherals have been grouped into power domains that can be turned on and off by the application code as needed.
Programming the xG26 Dev Kit is easy using a USB Micro-C cable and the on-board J-Link debugger. A USB virtual COM port provides a serial connection to the target application, and the Packet Trace Interface (PTI) offers invaluable debug information about transmitted and received packets in wireless links. Included on the board is a 32 Mbit serial flash that can be used for Over-The-Air (OTA) firmware upgrade, or as a general purpose non-volatile memory. The xG26 Dev Kit is supported in Simplicity Studio™, and a Board
Support Package (BSP) is provided to give application developers a flying start.
Energy profiling and advanced wireless network analysis and debugging tools are available through the provided Mini Simplicity Connector using an external Silicon Labs debugger.
To connect external hardware to the xG26 Dev Kit, use the 20 breakout pads, which present peripherals from the EFR32MG26 Wireless Gecko such as I2C, SPI, UART, and GPIOs. The breakout pads follow the same pinout as the expansion headers (EXP) on other Silicon Labs Starter Kits. The board also features a Qwiic connector which can be used to connect hardware from the Qwiic Connect System through I2C.
TARGET DEVICE
- EFR32 Wireless Gecko System-on-Chip (EFR32MG26B510F3200IM68)
- High-performance 2.4 GHz radio
- 32-bit ARM® Cortex®-M33 with 78.0 MHz maximum operating frequency
- 3200 kB flash and 512 kB RAM
KIT FEATURES
- 2.4 GHz ceramic chip antenna
- Power control of on-board peripherals for ultra-low power operation
- Relative humidity and temperature sensor
- Ambient light sensor
- Hall effect sensor
- 6-axis inertial sensor
- MEMS stereo microphones
- Pressure sensor
- 64 Mbit flash for OTA programming and data logging
- RGB LED and two push buttons
- Precise voltage reference and dedicated U.FL connector for ADC measurements
- 20-pin 2.54 mm breakout pads
- Qwiic® connector
- SEGGER J-Link on-board debugger
- Virtual COM port
- Packet Trace Interface (PTI)
- Mini Simplicity connector for AEM and packet trace using external Silicon Labs debugger
- USB or coin cell battery powered
- External battery connector
SOFTWARE SUPPORT
- Simplicity Studio™
Kit Hardware Layout
Documents
Package Includes
1x EFR32xG26 Dev Kit board (BRD2608A)
Leave a Reply