Official Silicon Labs EFR32xG26 Explorer Kit (xG26-EK2709A) (BRD2709A)
Original price was: ₹6,999.00.₹4,299.00Current price is: ₹4,299.00. (Excl. 18% GST)
Price (Excl. GST): ₹4,299.00
Price (Incl. GST): ₹5,072.82
- Based on EFR32xG26 2.4 GHz Wireless SoC
- +10 dBm, 1536 kB flash, 256 kB RAM, QFN48
- Two LEDs and two push buttons
- Reset button
- USB connector for power and debug connection
- On-board SEGGER J-Link debugger
- Virtual COM port
- Packet Trace Interface (PTI)
- Breakout pads for GPIO access and connection to external hardware
- Third-party add-on connectors
- mikroBUS socket
- Qwiic® connector
| Weight | 100 g |
|---|---|
| Dimensions | 240 × 120 × 50 mm |
Out of stock
This product is currently sold out.
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product. Product Images are shown for illustrative purposes only and may differ from the actual product.
The EFR32xG26 Explorer Kit is an ultra-low cost, small form factor development and evaluation platform for the EFR32MG26 Wireless System-on-Chip. The EFR32xG26 Explorer Kit is focused on rapid prototyping and concept creation of IoT applications. It is designed around the EFR32MG26 SoC, which is an ideal device family for developing energy-friendly connected IoT applications.
The kit features a USB interface, an on-board SEGGER J-Link debugger, two user-LEDs and two buttons, and support for hardware add-on boards via a mikroBus socket and a Qwiic connector. The hardware add-on support allows developers to create and prototype applications using a virtually endless combination of off-the-shelf boards from MIKROE, SparkFun, Adafruit, and Seeed Studio.
TARGET DEVICE
- EFR32MG26 Wireless System-on-Chip (EFR32MG26B510F3200IM48-B)
- High-performance 2.4 GHz radio
- 32-bit ARM® Cortex®-M33 with 78 MHz maximum operating frequency
- 3200 kB flash and 512 kB RAM
KIT FEATURES
- 2x User LEDs and push buttons
- 28-pin 2.54 mm breakout pads
- mikroBUS™ socket
- Qwiic® connector
- SEGGER J-Link on-board debugger
- Virtual COM port
- Packet Trace Interface (PTI)
- USB-powered
SOFTWARE SUPPORT
- Simplicity Studio™
The EFR32xG26 Explorer Kit has been designed to inspire customers to make IoT devices with the Silicon Labs EFR32MG26 Wireless
System-on-Chip. The kit includes a mikroBUS™ socket and Qwiic® connector, allowing users to add features to the kit with a large
selection of off-the-shelf boards.
Programming the EFR32xG26 Explorer Kit is easily done using a USB Type-C cable and the on-board J-Link debugger. A USB virtual
COM port provides a serial connection to the target application, and the Packet Trace Interface (PTI) offers invaluable debug information about transmitted and received packets in wireless links. The EFR32xG26 Explorer Kit is supported in Simplicity Studio™ and a
Board Support Package (BSP) is provided to give application developers a flying start.
External hardware is connected to the EFR32xG26 Explorer Kit by using the 28 breakout pads which present peripherals from the
EFR32MG26 Wireless SoC such as I2C, SPI, UART, and GPIOs. The mikroBUS socket allows inserting mikroBUS add-on boards
which interface with the EFR32MG26 through SPI, UART, or I2C. The Qwiic connector can be used to connect hardware from the Qwiic
Connect System through I2C.
Kit Hardware Layout
Documents
Package Includes
1x EFR32xG26 Explorer Kit board (BRD2709A)
Leave a Reply