MPU-6050 3-Axis Accelerometer and Gyro Sensor
SKU:
SEN0102
Original price was: ₹399.00.₹139.00Current price is: ₹139.00. (Excl. 18% GST)
- Chip built-in 16bit AD converter, 16-bit data output
- Driver Chip: MPU6050
- Operating Voltage: 3-5V DC
- Communication: I2C/IIC Protocol
- Gyro Range: ± 250, 500, 1000, 2000 °/s
- Accelerometer Range: ± 2 ± 4 ± 8 ± 16 g
ACS712 30A Range Current Sensor Module
SKU:
SEN0101
Original price was: ₹179.00.₹83.00Current price is: ₹83.00. (Excl. 18% GST)
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 30A
- Sensitivity: 100mV/A
ACS712 20A Range Current Sensor Module
SKU:
SEN0100
Original price was: ₹399.00.₹94.00Current price is: ₹94.00. (Excl. 18% GST)
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 20A
- Sensitivity: 100mV/A
ACS712 5A Range Current Sensor Module
SKU:
SEN0099
Original price was: ₹148.00.₹79.00Current price is: ₹79.00. (Excl. 18% GST)
- Low-noise analog signal path.
- Device bandwidth is set via the new FILTER pin.
- 5 µs output rise time in response to step input current.
- Small footprint, low-profile SOIC8 package.
- 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
Dry Reed Sensor Module Magnetic Control Switch
SKU:
SEN0098
Original price was: ₹149.00.₹40.00Current price is: ₹40.00. (Excl. 18% GST)
- Working voltage 3.3V-5
- Output format: digital switching output (0 and 1)A
- fixed bolt holes for easy installation
2 Channel Tilt Sensor Module
SKU:
SEN0097
Original price was: ₹554.00.₹149.00Current price is: ₹149.00. (Excl. 18% GST)
- Operating voltage 3.3V-12V
- A fixed bolt hole for easy installation
- Wide voltage LM393 comparator
- Maximum output current: 15mA
- Can work on low voltages
SW520D Tilt Sensor Module
SKU:
SEN0096
Original price was: ₹100.00.₹40.00Current price is: ₹40.00. (Excl. 18% GST)
- Voltage supply range: 3.3V to 5V
- Maximum output current: 15mA
- Conductive time: 2ms
- Operating temperature range: 0℃ to +80℃
- Size: 3cm*2cm*1cm (L*W*H)
4pin Thermal Thermistor Temperature Sensor Module
SKU:
SEN0095
Original price was: ₹159.00.₹36.00Current price is: ₹36.00. (Excl. 18% GST)
- Using the NTC thermistor sensor, good sensitivity.
- The comparator output signal clean waveform is good, driving ability than 15mA.
- With bolt holes for easy installation.
- Adjust the temperature distribution bit detection threshold.
- Working voltage 3.3V-5V.
- The output format: Digital switching output (0 and 1).
- Using a wide voltage LM393 comparator.
3pin Thermal Thermistor Temperature Sensor Module
SKU:
SEN0094
Original price was: ₹159.00.₹36.00Current price is: ₹36.00. (Excl. 18% GST)
- Adopt the NTC thermistor sensor, sensitivity is good
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma.
- With potentiometer to adjust the temperature detection threshold
- Working voltage: 3.3 V to 5 V
- Output form: digital switch output (0 and 1)
- It has a fixed bolt hole, convenient installation
4pin Photosensitive Sensor Module Light- Dependent Control
SKU:
SEN0093
Original price was: ₹99.00.₹31.00Current price is: ₹31.00. (Excl. 18% GST)
- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
3pin Photosensitive Sensor Module Light- Dependent Control LM393
SKU:
SEN0092
Original price was: ₹95.00.₹29.00Current price is: ₹29.00. (Excl. 18% GST)
- Operating Voltage: 3.3V to 5V
- Operating Current: 15mA
- Length: 32mm
- Width: 14mm
- Height: 8mm
- Weight: 3g
5-Channel Flame Sensor Module
SKU:
SEN0091
Original price was: ₹455.95.₹125.00Current price is: ₹125.00. (Excl. 18% GST)
- Detecting range: >120 degree
- Analog and digital outputs
- On-board potentiometer and indicators
- 1% resistors to make this module more reliable and precise
- Operating Voltage: 3.3V – 9V
- Board Diameter: 40 mm.
4PIN IR Infrared Flame Detection Sensor Module
SKU:
SEN0090
Original price was: ₹109.00.₹35.00Current price is: ₹35.00. (Excl. 18% GST)
- High Photo Sensitivity
- Fast Response Time
- Sensitivity adjustable
- Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
- Detection range: up to 100 cm.
- Adjustable detection range.
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
- Comparator chip LM393 makes module readings stable.
- Operating voltage 3.3V-5V.
- Digital and Analog Output.
- Power indicator and digital switch output indicator.
3PIN IR Infrared Flame Detection Sensor Module
SKU:
SEN0089
Original price was: ₹89.90.₹29.00Current price is: ₹29.00. (Excl. 18% GST)
- 1.Can detect the flame or the light with the wavelength at the range of 760 nm to 1100 nm.
- 2.The detection angle is about 60 degrees,extremelty sensitive to the flame spectrum.
- 3.Sensitivity is adjustable. (shown in blue digital potentiometer)
- 4.The comparator output with clean signal,good waveform,strong driving ability of more than 15mA.
- 5.With an adjustable precision potentiometer to adjust the sensitivity.
- 6.Operating voltage:3.3V-5V.
- 7.The output form:DO digital switching outputs (0 and 1).
- 8.A fixed bolt hole is set for easy installation.
- 9.Small plates PCB size:3.2cm * 1.4cm.
- 10.Using LM393 comparator with wide voltage.
360 Degree Trajectory Ball Module Hall Effect Sensor
SKU:
SEN0088
Original price was: ₹649.00.₹357.00Current price is: ₹357.00. (Excl. 18% GST)
- Operating Voltage: 2.5-5.25 V
- Operating Temperature:20~70 °C
- Material: Plastic.
- Application: Electronic Circuits.
- Dimensions: 28 x 22 x 8 (LxWxH) mm
- Weight: 2 gm
WCS1700 Hall Current Sensor with Over Current Protection
SKU:
SEN0087
Original price was: ₹1,099.00.₹680.00Current price is: ₹680.00. (Excl. 18% GST)
- Working voltage: DC-DC 5V
- Pass-Through Wire Diameter: 9mm
- Output Current Sink: 0.4mA
- the current detection resolution of 32mV / A
- output overcurrent signal indication
Hall Sensor Module LM393 Linear Hall Effect
SKU:
SEN0086
Original price was: ₹241.00.₹34.00Current price is: ₹34.00. (Excl. 18% GST)
- 3144 hall sensor
- Features wide-range voltage comparator LM393
- Signal output indicator
- Analog / Digital output
Infrared Inspection Module Obstacle Avoidance
SKU:
SEN0085
Original price was: ₹99.00.₹25.00Current price is: ₹25.00. (Excl. 18% GST)
- There is an obstacle, the green indicator light on the circuit board
- Detection distance: 2 ~ 30cm
- Detection angle: 35 °
- Comparator chip: LM393
- 3mm screw holes for easy mounting
Infrared Obstacle Avoidance Tracking Sensor Module
SKU:
SEN0084
Original price was: ₹102.00.₹26.00Current price is: ₹26.00. (Excl. 18% GST)
- Utilizes infrared (IR) technology for obstacle detection.
- Includes both infrared transmitting and receiving tubes.
- Operates in an active low configuration.
- Detects obstacles by emitting infrared light and receiving reflected signals.
- Suitable for applications requiring obstacle avoidance in robotics, automation, and smart devices.
- Easily connects to microcontrollers like Arduino for automated control systems.
TCRT5000 IR reflex Tracking Sensor Module Smart Car
SKU:
SEN0083
Original price was: ₹145.00.₹34.00Current price is: ₹34.00. (Excl. 18% GST)
- The working voltage: 5V
- A fixed bolt hole for easy installation
- Build-in Tcrt5000 Sensor NSOR
- Applicable to a variety of platforms including Arduino / AVR / ARM /PIC
