TCRT5000 IR reflex Tracking Sensor Module Smart Car
SKU:
SEN0083
Original price was: ₹145.00.₹34.00Current price is: ₹34.00. (Excl. 18% GST)
- The working voltage: 5V
- A fixed bolt hole for easy installation
- Build-in Tcrt5000 Sensor NSOR
- Applicable to a variety of platforms including Arduino / AVR / ARM /PIC
Hall Sensor Module LM393 Linear Hall Effect
SKU:
SEN0086
Original price was: ₹241.00.₹34.00Current price is: ₹34.00. (Excl. 18% GST)
- 3144 hall sensor
- Features wide-range voltage comparator LM393
- Signal output indicator
- Analog / Digital output
KY-031 The Knock Sensor Module
SKU:
SEN0027
Original price was: ₹250.00.₹35.00Current price is: ₹35.00. (Excl. 18% GST)
- Detect shocks with the spring and send a signal to Controller Board
- Operating voltage: 3.3V-5V
- Digital output
- Bolt holes for easy installation.
USB 2.0 A-B Male Printer Cable 0.5m
SKU:
CAB0001
Original price was: ₹69.00.₹35.00Current price is: ₹35.00. (Excl. 18% GST)
- USB type: A-B
- Cable length: 50 cm
- Color: Blue
- Good quality
USB 2.0 A-B Male Printer Cable 0.3m
SKU:
CAB0002
Original price was: ₹69.00.₹35.00Current price is: ₹35.00. (Excl. 18% GST)
- USB type: A-B
- Cable length: 30 cm
- Color: Blue
- Good quality
4PIN IR Infrared Flame Detection Sensor Module
SKU:
SEN0090
Original price was: ₹109.00.₹35.00Current price is: ₹35.00. (Excl. 18% GST)
- High Photo Sensitivity
- Fast Response Time
- Sensitivity adjustable
- Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
- Detection range: up to 100 cm.
- Adjustable detection range.
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
- Comparator chip LM393 makes module readings stable.
- Operating voltage 3.3V-5V.
- Digital and Analog Output.
- Power indicator and digital switch output indicator.
LM393 Test Motor Speed Counter Sensor Groove Coupler Encoder Module
SKU:
SEN0136
Original price was: ₹101.00.₹35.00Current price is: ₹35.00. (Excl. 18% GST)
- Using imported groove optical coupling sensor, width 5mm.
- It has the output state light, if output high level, the lights are off. if output low level, it on.
- If it covered, it will output high level; otherwise, its output low level.
- Good signal and waveform, with a strong driving ability for more than 15mA.
- Equipped with a fixed bolt hole, easy install.
- Use the LM393 wide voltage comparer.
3-6V DC Motor with Wire
SKU:
ROBO0018
Original price was: ₹49.00.₹35.00Current price is: ₹35.00. (Excl. 18% GST)
- Small size, suitable for toy applications and Arduino projects
- Operates at 5V, making it compatible with common electronic devices
- High-speed motor, suitable for applications requiring fast rotation
- Can handle a rated torque of 29.2 g.cm
- Provides an output power of 3.47W
KY-036 Metal Touch Sensor/Human Body Touch Sensor Module
SKU:
SEN0014
Original price was: ₹199.00.₹36.00Current price is: ₹36.00. (Excl. 18% GST)
- Working voltage: for DC 5V
- Dimensions: 43 x 16 x 15 mm / 1.69 x 0.63 x 0.59 inch
- Single channel signal output
- Low level output signal used for human body touch sensor alarm
- Adjustable sensitivity
3pin Thermal Thermistor Temperature Sensor Module
SKU:
SEN0094
Original price was: ₹159.00.₹36.00Current price is: ₹36.00. (Excl. 18% GST)
- Adopt the NTC thermistor sensor, sensitivity is good
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma.
- With potentiometer to adjust the temperature detection threshold
- Working voltage: 3.3 V to 5 V
- Output form: digital switch output (0 and 1)
- It has a fixed bolt hole, convenient installation
4pin Thermal Thermistor Temperature Sensor Module
SKU:
SEN0095
Original price was: ₹159.00.₹36.00Current price is: ₹36.00. (Excl. 18% GST)
- Using the NTC thermistor sensor, good sensitivity.
- The comparator output signal clean waveform is good, driving ability than 15mA.
- With bolt holes for easy installation.
- Adjust the temperature distribution bit detection threshold.
- Working voltage 3.3V-5V.
- The output format: Digital switching output (0 and 1).
- Using a wide voltage LM393 comparator.
SW1801P 4pin Normally open vibration sensor module
SKU:
SEN0201
Original price was: ₹80.00.₹36.58Current price is: ₹36.58. (Excl. 18% GST)
- The working voltage of 3.3V-5V.
- Using the company’s high-sensitivity vibration switch, the default with SW-18015P vibration sensor.
- The comparator output, the signal clean, good waveform, driving ability, more than 15mA
- With a fixed bolt hole, easy to install.
- The use of wide voltage LM393 comparator.
KY-033 TCRT5000 Tracking Module
SKU:
SEN0009
Original price was: ₹120.00.₹37.00Current price is: ₹37.00. (Excl. 18% GST)
- Operating Voltage: 3-5.5V
- Supply Current: ≥ 20mA
- Optimal Sensing Distance: 3mm
- Working voltage of 5V, the output of the black line low, white line of high output
- Uses Infrared Light to Detect Anti-Interference Ability
- Sensors to adopt TCRT5000 High Sensitivity, Stable Performance
- Exquisite workmanship, with the indicator
- Has a fixed bolt hole for easy installation
GY-68 BMP180 Sensor Module
SKU:
SEN0143
Original price was: ₹180.00.₹37.00Current price is: ₹37.00. (Excl. 18% GST)
- 1.8V to 3.6V Supply Voltage
- Low power consumption – 0.5uA at 1Hz
- I2C interface
- Max I2C Speed: 3.5Mhz
- Very low noise – up to 0.02hPa (17cm)
- Fully calibrated
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
HX711 Weighing Pressure Sensor Module Big Size
SKU:
SEN0112
Original price was: ₹79.00.₹38.00Current price is: ₹38.00. (Excl. 18% GST)
- Output Sensitivity: 1.0 ± 0.1 mV / V.
- Two selectable differential input channels.
- On-chip active low noise PGA with the selectable gain of 32, 64 and 128.
- On-chip oscillator requiring no external component with optional external crystal.
- On-chip power-on-reset.
- Measurement Resolution: 24 bit.
KY-024 Linear Magnetic Hall sensor
SKU:
SEN0013
Original price was: ₹99.00.₹39.00Current price is: ₹39.00. (Excl. 18% GST)
- Operating Voltage: 3.3V-5V
- Features wide range voltage comparator LM393
- Adjustable sensitivity
- Signal output indicator with the retaining bolt hole, convenient installation
- Output form digital switch output (0 and 1 high and low level)
- The output effective signal is low level
- When there is sound, outputs low level and the signal light
KY-026 The Flame Sensor Module
SKU:
SEN0012
Original price was: ₹99.00.₹39.00Current price is: ₹39.00. (Excl. 18% GST)
- Comparator chip LM393 makes module readings stable.
- Operating voltage 3.3V-5V.
- Fast Response Time
- Sensitivity adjustable
- Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
- Detection range: up to 100 cm.
- Adjustable detection range.
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
Female to Female Jumper Wires 40 Pin Dupont Jumper Wire 20CM
SKU:
CAB0009
Original price was: ₹62.25.₹39.00Current price is: ₹39.00. (Excl. 18% GST)
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
- A popular choice for construction or repair
- Be used for the electronic project and Genuine Arduino product
- Flexible Breadboard Jumper Cable Wire allows you to plug and unplug easily for prototyping.
Male to Female Dupont Line 40 Pin 20cm 24AWG
SKU:
CAB0010
Original price was: ₹69.72.₹39.00Current price is: ₹39.00. (Excl. 18% GST)
- 40P colored jumper wires
- Length: 200mm
- Weight: 30 gm
- Compatible with 2.54mm spacing pin headers
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
Female to Female Jumper Wires 40 Pin Dupont Jumper Wire 30CM
SKU:
CAB0012
Original price was: ₹69.72.₹39.00Current price is: ₹39.00. (Excl. 18% GST)
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
- A popular choice for construction or repair
- Be used for the electronic project and Genuine Arduino product
- Flexible Breadboard Jumper Cable Wire allows you to plug and unplug easily for prototyping.
