Home » Shop

Showing 661–680 of 684 results

USB Blaster (ALTERA CPLD / FPGA download cable)

SKU: PRO0010
Original price was: ₹399.00.Current price is: ₹235.00. (Excl. 18% GST)
  • Stably support SignalTap II embedded logic analyzer function, no mistake while crawling data.
  • Fully support all Altera products such as CPLD: MAX3000, MAX7000, MAX9000 and MAXII.
  • FPGA: Stratix, StratixII, StratxIII, Cyclone, CycloneII, CycloneIII, ACEX1K, APEX20K and FLEX10K etc.
  • Active serial configuration device: EPCS1, EPCS4, EPCS16, EPCS64 etc.
  • Enhanced configuration devices: EPC1, EPC4.
  • Supports 3 download mode: AS, PS and JTAG
Purchase & earn 2 points!Read more

USB Logic Analyzer 24M8CH for Debugging

SKU: TOO0014
Original price was: ₹950.00.Current price is: ₹480.00. (Excl. 18% GST)
  • Logical light indication: a small light indicates CHO electrical level.
  • 8-Channels USB logic analyzer with a 24Mhz sampling frequency
  • The Sampling Rate can be selected from 25KHz to 24MHz.
  • Voltage: 0-5.5V, Threshold Voltage: 1.5V
  • USB power supply
  • Protocol analysis (I2C, SPI, UART, 1-wire, CAN, LIN etc.)
Purchase & earn 5 points!Read more

USB to TTL Serial Cable Adapter FT232 USB Cable FT232RL TTL with CTS RTS 6pin

SKU: COM0037
Original price was: ₹430.77.Current price is: ₹305.00. (Excl. 18% GST)
  1. Product: 6Pin FTDI FT232RL FT232 Module For Arduino USB to TTL UART
  2. Connector type: USB To TTL RS232
  3. Input Supply voltage: 3.3 ~ 5V
  4. The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB
Purchase & earn 3 points!Add to cart

W25Q128 Storage Module 128Mbit Flash SPI Interface

SKU: MEM0004
Original price was: ₹199.00.Current price is: ₹139.00. (Excl. 18% GST)
  1. Using serial Nor flash external expansion memory chip W25Q128.
  2. Operating Voltage: 2.7-3.6V
  3. Support the SPI interface.
  4. Capacity: 128M-bit / 16M-byte
  5. Clock Frequency: ≤ 104MHz
Purchase & earn 1 point!Add to cart

W25Q32 Large Capacity Flash Storage Module

SKU: MEM0003
Original price was: ₹120.00.Current price is: ₹50.00. (Excl. 18% GST)
  1. Support SPI interface
  2. Provide STM32 test code
  3. Capacity: 32M-bit / 4M-byte
  4. The clock frequency is less than 104MHz
  5. Operating voltage: 2.7~3.6V
  6. Size: 14mm * 15mm
Purchase & earn 1 point!Add to cart

W25Q64 64Mbit 8 MByte FLASH Data Flash module SPI interface BV/FV

SKU: MEM0002
Original price was: ₹179.00.Current price is: ₹65.00. (Excl. 18% GST)
  1. IC: 25Q64FVSIG-1935
  2. Capacity: 64M-bit / 8M-byte
  3. Clock frequency: <104MHz
  4. Working voltage: 2.7V ~ 3.6V
  5. Current: 4mA
  6. Dimensions (LxWxH): 15.5 x 14.5 x 3.7 mm
Purchase & earn 1 point!Add to cart

Water Flow Sensor (Sea) YF-S201 Flowmeter G1/2 1- 30L/min Black 5-24V

SKU: SEN0122
Original price was: ₹329.00.Current price is: ₹145.00. (Excl. 18% GST)
  1. Working Voltage: 5 to 18V DC (min tested working voltage 4.5V).
  2. Max current draw: 15mA @ 5V.
  3. Working Flow Rate: 1 to 30 Liters/Minute.
  4. Maximum water pressure: 2.0 MPa.
  5. Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min).
Purchase & earn 1 point!Read more

Water Flow Sensor (Sea) YF-S201 Flowmeter G1/2 1- 30L/min White 5-24V

SKU: SEN0121
Original price was: ₹329.00.Current price is: ₹175.00. (Excl. 18% GST)
  1. Working Voltage: 5 to 18V DC (min tested working voltage 4.5V).
  2. Max current draw: 15mA @ 5V.
  3. Working Flow Rate: 1 to 30 Liters/Minute.
  4. Maximum water pressure: 2.0 MPa.
  5. Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min).
Purchase & earn 2 points!Add to cart

Water Quality Sensor TDS Water Quality Testing Probe

SKU: SEN0123
Original price was: ₹455.00.Current price is: ₹306.00. (Excl. 18% GST)
  1.  Input Voltage: 5 V
  2. measuring range 0-3000PPM,
  3. Measurement accuracy 2%,
  4. connector: Plug 1/4″ PE
  5. Probe Diameter 6.35mm
Purchase & earn 3 points!Add to cart

WCS1700 Hall Current Sensor with Over Current Protection

SKU: SEN0087
Original price was: ₹1,099.00.Current price is: ₹680.00. (Excl. 18% GST)
  1. Working voltage: DC-DC 5V
  2. Pass-Through Wire Diameter: 9mm
  3. Output Current Sink: 0.4mA
  4. the current detection resolution of 32mV / A
  5. output overcurrent signal indication
Purchase & earn 7 points!Add to cart

Weighing Load Cell Sensor 10Kg for Electronic Kitchen Scale YZC-133 With Wires

SKU: SEN0110
Original price was: ₹390.00.Current price is: ₹244.92. (Excl. 18% GST)
  1. Weighing Range: 0 ~ 10 kg.
  2. Rated Output: 1.0 ± 0.1mV / V.
  3. Non Linear Output: ± 0.03% F.S.
  4. Input Impedance: 1066 ± 10% Ω.
  5. Output Impedance: 1000 ± 10% Ω.
  6. Insulation Resistance: 2000 MΩ.
Purchase & earn 2 points!Add to cart

Weighing Load Cell Sensor 1Kg for Electronic Kitchen Scale YZC-131 With Wires

SKU: SEN0107
Original price was: ₹321.21.Current price is: ₹129.80. (Excl. 18% GST)
  1. Weighing Range: 0 ~ 1 kg.
  2. Rated Output: 1.0 ± 0.1mV / V.
  3. Non Linear Output: ± 0.03% F.S.
  4. Input Impedance: 1066 ± 10% Ω.
  5. Output Impedance: 1000 ± 10% Ω.
  6. Insulation Resistance: 2000 MΩ.
Purchase & earn 1 point!Add to cart

Weighing Load Cell Sensor 20Kg for Electronic Kitchen Scale YZC-133 With Wires

SKU: SEN0111
Original price was: ₹600.00.Current price is: ₹200.00. (Excl. 18% GST)
  1. Weighing Range: 0 ~ 20 kg.
  2. Rated Output: 1.0 ± 0.1mV / V.
  3. Non Linear Output: ± 0.03% F.S.
  4. Input Impedance: 1066 ± 10% Ω.
  5. Output Impedance: 1000 ± 10% Ω.
  6. Insulation Resistance: 2000 MΩ.
Purchase & earn 2 points!Add to cart

Weighing Load Cell Sensor 3Kg for Electronic Kitchen Scale YZC-131 With Wires

SKU: SEN0108
Original price was: ₹598.00.Current price is: ₹150.00. (Excl. 18% GST)
  1. Weighing Range: 0 ~ 3 kg.
  2. Rated Output: 1.0 ± 0.1mV / V.
  3. Non Linear Output: ± 0.03% F.S.
  4. Input Impedance: 1066 ± 10% Ω.
  5. Output Impedance: 1000 ± 10% Ω.
  6. Insulation Resistance: 2000 MΩ.
Purchase & earn 2 points!Read more

Weighing Load Cell Sensor 5kg YZC-131 With Wire

SKU: SEN0109
Original price was: ₹610.00.Current price is: ₹171.00. (Excl. 18% GST)
  1. Model: YZC-131A
  2. Dimensions: 75 x 13 x 13 mm (L x W x H)
  3. Range: 5 kg
  4. Cable Length: 18 cm
  5. Fitting ScrewHole Size:  M3
  6. Rated output: 1.0 0.1mV / V
  7. Nonlinear: 0.05% F.S
  8. Hysteresis: 0.0% F.S
  9. Repeatability: 0.05% F.S
Purchase & earn 2 points!Add to cart

WEMOS SHT30 I2C Digital Temperature and Humidity Sensor module

SKU: SEN0116
Original price was: ₹450.00.Current price is: ₹255.00. (Excl. 18% GST)
  • I2C Interface
  • Two user selectable addresses
  • Typical accuracy ±3%RH and ±0.3°C
Purchase & earn 3 points!Add to cart

WiFi and Bluetooth Esp32 4MB Flash D1 R32 CH340G Development Board Micro USB

SKU: DEV0044
Original price was: ₹997.00.Current price is: ₹405.00. (Excl. 18% GST)
  1. Microcontroller: ESP32
  2. Flash Memory: 4MB
  3. Wireless Connectivity: WiFi and Bluetooth
  4. USB-to-Serial Converter: CH340G
Purchase & earn 4 points!Read more

Wireless Zigbee CC2531 Sniffer Bare Board Packet Protocol Analyzer Module

SKU: COM0045
Original price was: ₹999.00.Current price is: ₹399.00. (Excl. 18% GST)
  1. 8 I/O Ports
  2. Low Power Consumption.
  3. Operating Frequency: 2.045GHz – 2.485GHz
  4. Transmission Speed: 250Kbaud
Purchase & earn 4 points!Add to cart

X-NUCLEO-IHM03A1 PowerSTEP01 STMicroelectronics Stepper Motor Driver for STM32 Nucleo Board

SKU: DEV0047
Original price was: ₹3,999.00.Current price is: ₹1,599.00. (Excl. 18% GST)
  • Voltage range from 10.5 V to 85 V
  • Phase current up to 10 A rms
  • Power OK and fault LEDs
  • Up to 1/128 micro-stepping
  • Programmable speed profile and overcurrent protection
  • Sensorless stall detection
  • Adjustable output slew rate
  • Overtemperature protection
  • Compatible with Arduino UNO R3 connector
  • Compatible with STM32 Nucleo boards
  • Suitable for multi-motor solution
  • RoHS compliant
Purchase & earn 16 points!Add to cart

XD-42 Bread Board Power Supply Module 5V 3.3V

SKU: POW0006
Original price was: ₹209.00.Current price is: ₹88.00. (Excl. 18% GST)
  1. Locking On/Off Switch
  2. Green LED Power Indicator
  3. Voltage Swapping Switch on both rail Channel
  4. Its concave design will not waste your proto zone.
  5. Easy to install on a breadboard with Compact portable size
Purchase & earn 1 point!Add to cart