Micro SD Card Module Mini TF Card Read and Write 6pin
- Supply Voltage (V)- 3.3
- Control Interface- GND, VCC, MISO, MOSI, SCK, CS
- Mounting Hole size- M2
- PCB Size (mm)- 18 x 20
- Weight (gm)- 4
KY-022 Infrared Receiver Module for Arduino
- Dimension: 2.5 x 1.5 x 1.5 cm.
- Receiving angle: 90 °.
- Working voltage: 2.7 ~ 5.5V.
- Frequency: 37.9KHz
- Receiving range: 18m.
- Weight: 4 gm.
KY-002 Vibration Switch Module
- Component Type SW- 18015P
- Maximum Voltage(V)- 12
- Rated Heating Current(mA)- 20
- PCB Size ( L x W ) mm- 20 x 15
- Height (mm)- 18
T856-C Power Bank Charging Circuit Module (5V USB Step Up Type C Charging Module)
- Input Voltage: 3. 7V~5. 5V
- Output voltage: 5V, BAT Discharging Stop Voltage: 2. 9V
- Discharging Efficiency: 85%(input 3. 7V output 5V/1A)
- Charging Interface: C-Type USB port
- Under Voltage Protection
T856-C Power Bank Charging Circuit Module (5V USB Step Up Type C Charging Module)
Original price was: ₹99.00.₹24.58Current price is: ₹24.58. (Excl. 18% GST)- Input voltage: 3.7V~5.5V
- Charging current: up to 1A
- Output current: up to 1A
- Output voltage: 5V
- BAT discharge termination voltage: 2.9V
- Preset 4.2V charging voltage with an accuracy of ±1%
- Discharge efficiency: 85% (input 3.7V, output 5V/1A)
KY-005 Infrared Transmit Sensor Module
- This is 38KHz Infrared IR transmitter sensor module For Arduino
- Transmit 38KHz modulating signal
- Suitable for Arduino DIY project
- Material: PCB
KY-013 Analog Temperature Module
- Operating Voltage: 5v.
- Temperature measurement range: -55°C to 125°C.
- Measurement Accuracy: ±0.5°C
- Analog Temperature Sensor Module for Arduino
- High Efficiency
- It Suits Most Users in Different Environments
1.64FT Micro USB Cable 0.5m
- Color : Blue
- Cable Length: 50 CM (0.5 Meter.)
- USB Type: USB to MicroUSB
KY-016 DIP 3 Color LED Module 5mm
- The use of plug-in full-color LED.
- RGB trichromatic limiting resistor to prevent burnout.
- Through the PWM adjusting, three primary colors can be mixed to obtain different colors.
- With a variety of single-chip interface.
- The working voltage: 5V.
- LED drive mode: common cathode driver
KY-012 Active Buzzer Module
- Operating Voltage– 3.5V – 5.5V
- Maximum Current– 30mA @ 5VDC
- Resonance Frequency– 2.5kHz ±300Hz
- Minimum Sound Output– 85Db @ 10cm
- Working Temperature– -20°C to 70°C
- Storage Temperature– -30°C to 105°C
- Dimensions– 18.5 x 15mm
KY-006 Passive Buzzer High Level Module
- Working Voltage -1.5V-15V DC, Passive Buzzer outputs 1.5-2.5kHZ audio signal when powered
- Works perfect with flight controller project
- Super Loud Passive Alarm Buzzer Beeper Tracker Module
- Good for learning basic knowledge about sensors
- It is extremely easy fancier to control and use these modules
KY-011 5mm Two Color LED Module
- Diameter: 5mm
- Package Type: Diffusion
- Color: Red + Green
- Luminosity Intensity (MCD)
KY-029 3mm Two Color LED Module
- Diameter: 3mm
- Package Type: Diffusion
- Color: Red + Green
- Luminosity Intensity (MCD)
Infrared Inspection Module Obstacle Avoidance
- There is an obstacle, the green indicator light on the circuit board
- Detection distance: 2 ~ 30cm
- Detection angle: 35 °
- Comparator chip: LM393
- 3mm screw holes for easy mounting
KY-039 Finger Detecting Heartbeat Module
1. Detects and measures heartbeat or pulse rate.
2. Designed to connect with Arduino and other microcontrollers.
3. Ideal for health monitoring and biofeedback projects.
4. Compact and easy to integrate into wearable devices or medical equipment.
5. Provides reliable pulse readings for precise health tracking.
Infrared Obstacle Avoidance Tracking Sensor Module
- Utilizes infrared (IR) technology for obstacle detection.
- Includes both infrared transmitting and receiving tubes.
- Operates in an active low configuration.
- Detects obstacles by emitting infrared light and receiving reflected signals.
- Suitable for applications requiring obstacle avoidance in robotics, automation, and smart devices.
- Easily connects to microcontrollers like Arduino for automated control systems.
KY-018 Photosensitive Resistor Sensor Module
1. This module is a high-quality photosensitive sensor module designed to detect light, ideal for use with Arduino projects.
2. It utilizes a photosensitive resistor for light detection.
3. The resistance of the photoresistor typically measures less than 80 Ohms when exposed to full light.
4.In complete darkness, the dark resistance typically exceeds 20 Mega Ohms.
HC-SR04 Ultrasonic range finder with cartoon Ultrasonic Sensor mounting Bracket
- Acrylic Body.
- Easy to install.
- Attractive red or blue (sent randomly).
- Usage: fixed ultrasonic sensor modules and other products
GY-BMP280-3.3 Precision Altimeter Atmospheric Pressure BMP280 Sensor Module
- Comes with the BME280 sensor.
- Pressure accuracy of ±1 hPa.
- Temperature accuracy ±1.0°C.
- Altimeter accuracy ±1 meter.
- Humidity: +-3%
MAX485 TTL to RS485 Converter Module
- On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver.
- A low power consumption for the RS-485 communication
- Onboard then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring.
- Slew-rate limited transceiver
- All pins of the chip have been lead to can be controlled through the microcontroller.
- Convenient RS-485 communication wiring
- Multiple Units can be connected to the same RS-485 bus wiring.
- All Chip pins are brought out for proper controls
