Core Board STM8S103F3P6 STM8 Development Board Minimum System Board
- Chipboard STM32F103C8T6
- On board, SWIM interface and reset button
- Micro USB line or the 2.54 pin to link to the power with the input voltage 4.5V-15V.
- Power light and the Demo indicator light
- Leads all the pins and has detailed label for the Pins.
- Support SWIM debug mode.
1.3 Inch SPI 7-Pin OLED Display Module with CS Pin (BLUE)
- Size: 1.3 inch
- Resolution: 128 x 64
- Controlling Driver Chip: SH1106
- Display Area: 21.74 x 10.86mm
- Driving Voltage: 3.3-5V
- Operating Temperature: -40~70 Celsius
- Interface Type: SPI
- Light Color: BLUE
- Number of pins: 7
NUCLEO-L073RZ Development Board, STM32 Nucleo-64, STM32L073RZ MCU, Arduino Uno & ST Morpho Connectivity
- Product: STMICROELECTRONICS NUCLEO-L073RZ Development Board
- STM32 microcontroller
- 1 user LED shared with ARDUINO®
- 1 user and 1 reset push-buttons
- 32.768KHz crystal oscillator
PICKIT3.5 KIT3.5 Programer Simulator without Microchip Logo
- Type: Debugger/Programmer
- Tool/Board Application: Debugging/Programming
- MCU Supported Families: Flash-based PIC MCUs
- Core Architecture: PIC, dsPIC
Official 7Semi SHT40 Humidity and Temperature Sensor Probe
-
High-accuracy digital temperature and humidity sensor
-
Wide measurement range for extreme environments
-
Ultra-low power consumption for battery-operated systems
-
Stainless steel protective housing with breathable design
-
I2C interface for easy system integration
-
Factory calibrated with NIST traceability
-
Built-in heater for stable humidity readings
-
Designed for harsh and industrial environments
37 pcs Sensors Kit compatible with Arduino
- For beginners who are interested in Arduino
- A complete set of Arduino’s most common and useful electronic components
- Infrared sensor receiving module
- Laser sensor module
- Temperature and humidity sensor module
- Infrared sensor module
- 5v relay module
- Obstacle avoidance sensor module.
Official Nordic Semiconductor NRF52833-DK – nRF52833 Bluetooth 5.1 mesh NFC Thread Zigbee 802.15.4/2.4 GHz Dev Kit
-
Multi-protocol support: Bluetooth 5.1, Bluetooth Mesh, Thread, Zigbee, 802.15.4, and 2.4 GHz proprietary.
-
Powered by nRF52833 SoC: ARM® Cortex®-M4 CPU with FPU, 512 KB Flash, and 128 KB RAM.
-
Arduino Uno Rev3 compatible: Works with a wide range of third-party shields.
-
Full I/O access: 42 GPIOs and interfaces via connectors.
-
Integrated PCB trace antenna and RF connector for direct RF testing.
-
External NFC antenna (included) for NFC-A tag functionality.
-
Supports Power Profiler Kit for precise power measurement.
-
Ideal for IoT, smart home, wearables, and industrial applications
Arduino UNO EK (एक) R4 Wi-Fi & Bluetooth – Made in India (Clone)
- Made in India 32-bit Arduino board with Wi-Fi & Bluetooth.
- Powered by Renesas R7FA4M1AB3CFM and ESP32-S3 module.
- 256 kB Flash, 32 kB SRAM, and 8 kB EEPROM.
- 12×8 programmable LED matrix for animations & games.
- 5V operating voltage, supports 6-24V input & USB-C power.
- Features DAC, CAN bus, and 14-bit ADC for advanced projects.
Official 7Semi BME690 Digital Sensor Probe – Metal (Temperature, Humidity, Pressure, Gas | I2C)
- Measures temperature, humidity, pressure, and gas (VOC/VSC)
-
Powered by Bosch Sensortec BME690 sensor
-
Supports Bosch BSEC software for advanced air-quality processing
-
I²C digital interface for easy integration
-
3.3 V operating voltage
-
Low-power design for embedded and IoT applications
-
Compact, rugged, and plug-and-play probe construction
-
Ideal for air-quality, HVAC, and environmental monitoring
KY-008 650nm Laser sensor Module 6mm 5V
- Voltage: 3.0 V – 5 V.
- Driver: APC circuit.
- Line length: about 135 mm.
- Transmit power: 58mW.
- Operating Current: 40mA.
- Operating Current: 40mA.
- Operating temperature: -36◦C ~ 65◦C
Raindrops Detection Sensor Module
- Operating voltage: 5V
- Provide both digital and analog output
- Adjustable sensitivity
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- Bolt holes for easy installation
Official 7Semi ADS1263 32bit ADC with PGA Breakout
-
32-Bit High-Resolution ADC – Delivers ultra-precise measurements for high-accuracy sensing applications
-
Based on TI ADS1262 – Ensures low noise, low offset, and low drift performance
-
Integrated Programmable Gain Amplifier (PGA) – Allows direct connection of low-level sensor signals
-
Onboard Precision Voltage Reference – Improves measurement stability and repeatability
-
Wide Data Rate Support – Configurable from 2.5 SPS to 38,400 SPS for flexible performance tuning
-
Auxiliary 24-Bit Delta-Sigma ADC – Enables simultaneous background or diagnostic measurements
-
Single-Cycle Settling Digital Filter – Minimizes latency during channel switching
ACEBOTT Intelligent Transportation STEM Education Kit with ESP32 – QE036
- Intelligent transportation STEM education kit
- Powered by ESP32 development platform
- Supports Arduino, ACECode, and APP programming
- Build smart traffic and autonomous driving projects
- Includes hands-on IoT and robotics learning
- Ideal for students, schools, and makers
Official 7Semi SHT45 Digital Humidity and Temperature Sensor Probe 0.1C Accuracy 1% RH 16bit I2C
- Digital output, I2C interface (I2C address 0x44)
- Fully functional in condensing environment
- Variable power heater
- NIST traceability
- Breatable shell
- Corrosion resistance
- High temperature resistance
- Large air permeability, fast gas humidity flow and exchange rate, uniform divergence.
- Excellent ability of anti-dust, anti-corrosion and waterproof (IP65）
Official PLC010935BP BoosterPack™ plug-in module for solar power line communication reference design
-
PLC BoosterPack Module: Based on TIDA-010935 reference design
-
LaunchPad Compatible: Works with MSPM0G3507 LaunchPad Development Kit
-
PLC Communication: Enables data transfer over power lines
-
Modem IC: Uses THVD8000 with OOK modulation
-
Line Driver: Integrated THS6222 for strong signal output
-
High Performance: Low distortion and reliable communication
-
Easy Integration: Plug-and-play BoosterPack form factor
-
Applications: Ideal for IoT, smart grid, industrial automation, and smart metering
Bluetooth 4.0 NRF51822 Evaluation Kit
- 2.4 GHz multiprotocol RF transceiver
- ARM Cortex-M0 32 bit processor
- 128 bit AES HW encryption
- 256kB flash & 32kB RAM
- Programmable Peripheral Interconnect (PPI)
- 10 bit ADC
Official 7Semi SCD40 CO2, Temperature and Humidity Sensor Breakout I2C
- Photoacoustic CO2 sensor technology (carbon dioxide sensor)
- Integrated temperature and humidity sensor
- Measurement range: 400 ppm – 2000 ppm
- Accuracy: +-(50 ppm + 5 % of reading)
- Current consumption: 17 mA (meas. rate = 5 s) / 0.5 mA (meas. rate = 5 min)
- Fully calibrated and linearized
- I2C digital interface
ESP8266 Serial Wifi Module NodeMcu Lua Wifi V3 （CH340 + 30PIN + Micro)
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ + 125°C
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
- Flash size: 4MByte
Water Quality Sensor TDS Water Quality Testing Probe
- Input Voltage: 5 V
- measuring range 0-3000PPM,
- Measurement accuracy 2%,
- connector: Plug 1/4″ PE
- Probe Diameter 6.35mm
Official TMDSFSIADAPEVM Fast Serial Interface (FSI) Adapter Board Evaluation Module
-
High-speed communication – Up to 200 Mbps throughput across isolation
-
Low signal count design for cost-effective, reliable data transfer
-
Built into select TI C2000™ Real-Time Control MCUs
-
Enables low-latency, time-critical data exchange between devices
-
Supports decentralized processing, sensing, and actuation
-
Designed to work with isolation devices for hot/cold side communication
-
FSI Adapter Board for easy evaluation and development
-
Integrated isolated power biasing and digital isolation
-
Includes LVDS (high-speed) and RS485 (medium-speed) drivers/receivers
-
Ideal for industrial drives, servo systems, sensing networks, and solar power
