PICKIT2 Programmer Simulator Debugger
| Brand | EmbeTronicX |
| CPU Socket | LGA 4677 |
| Compatible Devices | Personal Computer |
| RAM Memory Technology | LPDDR3 |
| Chipset Type | AMD 785G |
PIC K150 USB Automatic Programmer with ICSP Cable
- Support the most popular programming PIC chips, read, encryption and other features!
- No external power supply, communication, and power is only a USB cable to print complete, without any cable.
- PICSTARTPLUS much faster rate than programming.
- Can easily read the contents of the chip program area.
- Automatic programming verification.
PIC ICD2 PICKit2 PICKIT3 Universal Programmer Board
- The PIC ICD2 PICKit2 PICKIT3 Universal Programming Adapter Programmer Board is designed to work in conjunction with the popular PICkit 2 or PICkit3 programmer.
- USB Connectivity
- Debugging Capabilities
- Compact and Portable
PCF8574T I2C I/O Extension Board
- Interface: I2C
- Operating Voltage: 3-5VDC
- Ports: 8-bit Parallel Ports
- Can be used with Arduino and Raspberry Pi
Official xG26-DK2608A EFR32xG26 IoT Dev Kit Silicon Labs XG26 + 10 DBM DEV KIT (BRD2608A)
- Based on EFR32xG26 2.4 GHz Wireless SoC
- +10 dBm, 1536 kB flash, 256 kB RAM, 6×6 QFN48
- Secure Vault High
- AI/ML Hardware Accelerator
- Packet Trace Interface (PTI)
- Virtual COM Port
- On-board SEGGER J-link Debugger Supporting
- External Device Debugging
- User LED and Pushbuttons
- Si7021 RHT Sensor
- Intertial Sensor
- Stereo Microphones
- Pressure Sensor
- Ambient Light Sensor
- Hall-effect Sensor
- CR2032 Coin Cell Battery Support
Official TMDSHSECDOCK HSEC180 controlCARD baseboard docking station
-
Designed for HSEC180-based C2000™ controlCARDs
-
Header-pin access to all key MCU signals
-
Integrated breadboard area for custom prototyping
-
Supports USB or 5V barrel jack power input
-
Ideal for rapid development, testing, and debugging
-
Compatible with multiple TI controlCARD models
Official TMDSFSIADAPEVM Fast Serial Interface (FSI) Adapter Board Evaluation Module
-
High-speed communication – Up to 200 Mbps throughput across isolation
-
Low signal count design for cost-effective, reliable data transfer
-
Built into select TI C2000™ Real-Time Control MCUs
-
Enables low-latency, time-critical data exchange between devices
-
Supports decentralized processing, sensing, and actuation
-
Designed to work with isolation devices for hot/cold side communication
-
FSI Adapter Board for easy evaluation and development
-
Integrated isolated power biasing and digital isolation
-
Includes LVDS (high-speed) and RS485 (medium-speed) drivers/receivers
-
Ideal for industrial drives, servo systems, sensing networks, and solar power
Official TMDSCNCD28388D F28388D evaluation module for C2000™ MCU controlCARD™ (Daughter Card)
-
Supports TI C2000™ F2838xS and F2838xD MCUs
-
Low-cost and developer-friendly controlCARD platform
-
HSEC180 connector for high-speed interfacing
-
Ideal for motor control, automation, and digital power applications
-
Compatible with TMDSHSECDOCK docking station for expanded evaluation
-
Works seamlessly with TI Code Composer Studio™ and C2000Ware
Official TMDS64EVM AM64x Evaluation Module for Sitara™ Processors
-
Official TI evaluation module for AM64x Sitara™ processors
-
Supports industrial, networking, and real-time control applications
-
Features multi-core Arm® Cortex® processors for high performance
-
Multiple connectivity options – Ethernet, USB, Serial, and more
-
On-board debug and expansion interfaces for rapid prototyping
-
Compatible with TI development tools and SDKs
-
Ideal for embedded system designers, engineers, and developers
Official Texas Instruments TMDSDOCK28335 – Development Boards & Kits – TMS320 TMS320F28335 Experimenter Kit
- TMDSCNCD28335: TMS320F28335 DIMM100 based controlCARD
- DIMM100 Docking Station baseboard with DIMM100 controlCARD female connector
- XDS100v1 USB-to-JTAG Debug Probe enables real-time in-system programming and debugging
- Header pin access to key MCU signals – including most major digital IO and analog inputs
- Breadboard area for customizable routing/prototyping
- Board power can be provided by the provided USB cable or a 5V barrel supply
- Hardware Files are in C2000Ware at boards\controlCARDs\TMDSCNCD28335
Official Texas Instruments LP-MSPM0L1117 LaunchPad™ Development Kit for 32MHz Arm® Cortex®-M0+ MCU
-
Based on MSPM0L1117 Arm® Cortex-M0+ MCU
-
Compact, low-cost evaluation module (EVM)
-
On-board debug probe for programming, debugging & energy measurement
-
Includes 2 push buttons and 2 user LEDs for quick testing
-
Access to 40+ GPIO pins for external interfacing
-
Supports ADC inputs with low-pass filter placeholders for analog accuracy
-
Optimized for low-power and IoT applications
-
Fully supported by TI MSPM0 software ecosystem (Code Composer Studio™, drivers, libraries, examples)
-
Suitable for students, hobbyists, and professional developers
-
Ideal for IoT devices, automation, consumer electronics, and embedded projects
Official Texas Instruments LP-MSPM0G3519 LaunchPad™ Development Kit for 80MHz Arm® Cortex®-M0+ MCU
-
Based on MSPM0G3519 Arm® Cortex-M0+ MCU
-
On-board debug probe for programming, debugging & energy measurement
-
Includes 3 user buttons and 2 LEDs (1 RGB LED)
-
Access to 80+ I/O pins for expansion and prototyping
-
ADC & DAC low-pass filter placeholders for improved analog performance
-
External reference options available on the back of the board
-
Fully supported by TI software ecosystem (Code Composer Studio™, drivers, examples)
-
Ideal for IoT, sensor-based projects, industrial and low-power applications
Official Silicon Labs XG22-EK2710A EFR32MG22E Explorer Kit (BRD2710A)
- Based on EFR32MG22E224F512IM40 2.4 GHz Wireless SoC
- +6 dBm, 512 kB Flash, 32 kB RAM, QFN48
- Two LEDs and two push buttons
- Reset button
- USB connector for power and debug connection
- On-board SEGGER J-Link debugger
- Virtual COM port
- Packet Trace Interface (PTI)
- Breakout pads for GPIO access and connection to external hardware
- Third-party add-on connectors
- mikroBUS™ socket
- Qwiic® connector
Official Silicon Labs MGM260P-EK2713A xGM260P Explorer Kit (BRD2713A)
- Based on the MGM260PD22VNA2 +10 dBm 2.4 GHz PCB Module
- +10 dBm output power, 3200 kB flash, 512 kB RAM
- Two LEDs and two push buttons
- Reset button
- USB connector for power and debug connection
- On-board SEGGER J-Link debugger
- Virtual COM port
- Packet Trace Interface (PTI)
- Breakout pads for GPIO access and connection to external hardware
- Third-party add-on connectors
- mikroBUS socket
- Qwiic® connector
Official Silicon Labs EFR32xG26 Explorer Kit (xG26-EK2709A) (BRD2709A)
- Based on EFR32xG26 2.4 GHz Wireless SoC
- +10 dBm, 1536 kB flash, 256 kB RAM, QFN48
- Two LEDs and two push buttons
- Reset button
- USB connector for power and debug connection
- On-board SEGGER J-Link debugger
- Virtual COM port
- Packet Trace Interface (PTI)
- Breakout pads for GPIO access and connection to external hardware
- Third-party add-on connectors
- mikroBUS socket
- Qwiic® connector
Official Renesas Electronics RTK7FPA0E2S00001BJ RA0E2 R7FA0E2 FPB-RA0E2 RA ARM® Cortex®-M23 MCU 32-Bit Embedded Evaluation Board
-
Equipped with Renesas RA0E2 MCU for versatile embedded applications
-
Built-in SEGGER J-Link™ emulator – no extra debugging tools required
-
Compatible with Arduino Uno™ and Pmod™ expansion modules
-
Through-hole access to all MCU pins for custom prototyping
-
Ideal for IoT, sensors, automation, and low-power projects
-
Includes sample software for quick and easy project start
-
Powered via USB for convenience in development
-
Perfect for students, engineers, and makers
Official PLC010935BP BoosterPack™ plug-in module for solar power line communication reference design
-
PLC BoosterPack Module: Based on TIDA-010935 reference design
-
LaunchPad Compatible: Works with MSPM0G3507 LaunchPad Development Kit
-
PLC Communication: Enables data transfer over power lines
-
Modem IC: Uses THVD8000 with OOK modulation
-
Line Driver: Integrated THS6222 for strong signal output
-
High Performance: Low distortion and reliable communication
-
Easy Integration: Plug-and-play BoosterPack form factor
-
Applications: Ideal for IoT, smart grid, industrial automation, and smart metering
Official NUCLEO-F410RB STM32F410 Nucleo-64 STM32F4 ARM Cortex-M4 MCU 32-Bit Embedded Evaluation Board
- USB VBUS or external source (3.3V, 5V, 7 to 12V) and power management access point
- USB communication (LD1), user LED (LD2), power LED (LD3)
- Two push buttons – USER and RESET
- USB re-enumeration capability – virtual com port, mass storage, debug port
- Supported by wide choice of IDEs including IAR, Keil, GCC-based IDEs
Official NUCLEO-C092RC Development Board, STM32 Nucleo-64, STM32C092RC MCU Eval Board
- External SMPS to generate Vcore logic supply
- 24 MHz or 48 MHz HSE
- External SMPS experimentation dedicated connector
- Micro-B or Mini-B USB connector for the ST-LINK
- MIPI® debug connector
Official NUCLEO-C051C8 STM32C051C8 Nucleo-64 STM32C0 ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board
- STM32C051C8 MCU – ARM Cortex-M0+ with 64KB Flash.
- On-board ST-LINK – Built-in USB debugger/programmer.
- ARDUINO & ST morpho support – Easy hardware expansion.
- USB or external power – Flexible power supply options.
- STM32Cube & IDE support – Ready-to-use software and tools.
