Solder Wire 0.5mm 50g B Type 35% Tin Content
- Name: 63/37 rosin core solder
- Flux: 2.0%
- Color: silver
- Wire diameter: approx 1mm
- Melting point: 361 ° F / 183 ° C
- Total wire length of one reel: 1400 mm.
- Net Weight: 50 gm.
Solder Wire 0.8mm 50g
- Product: Solder Wire
- Diameter: 0.8mm
-
Type: Rosin Solder Wire
-
Shape: Small Roll Type
-
Color: Silver
-
Uses: Soldering
- Place of Application: Electric Soldering Iron
- Weight: 50g
SPI to Ethernet Hardware TCP/IP W5500 Ethernet Network Module
- Supports 8 independent sockets simultaneously.
- Internal 32Kbytes Memory for Tx/Rx Buffers.
- Power off mode: support.
- Network wake: support.
- Factory and Building Automation
- Medical Monitoring Equipment
SPP-C Bluetooth Serial pass-Through Module Wireless Serial Communication from Machine Wireless SPPC Replace HC-05 HC-06
- 3.3V DC power supply
- Operating Frequency Band:2.4GHz -2.48GHz unlicensed ISM band
- Bluetooth Specification: V2.1+EDR
- Dimension (mm): 27 x 13 x 2
- Weight: 5 g
ST Link V2 Programmer For STM8 and STM32 (Random Colour)
- PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable!
- Interface definition directly marked on the shell, clear, convenient and practical!
- 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V
STM32F030F4P6 core board development board core ARM CORTEX-M0
- Input Voltage: 3.3 V
- Output Voltage: 5-3.3 V
- CPU ARCHITECTURE: RM CORTEX-M0
- MICROPROCESSOR MODEL: STM32F030F4P6
- Dimensions: 48 x 30 x 8 (LxWxH) mm.
- Weight: 7 gm.
STM32F103C8T6 System Board (Blue Pill) STM32 ARM Core Board (Original)
- 100% Brand new and high quality STM32 Board
- Model: STM32F103C8T6.
- Core: ARM 32 Cortex-M3 CPU.
- Debug mode: SWD.
- 72MHz work frequency.
- 64K flash memory, 20K SRAM.
- 2.0-3.6V power, I/O.
STM32F407G-DISC1 Discovery Board with STM32F407VG MCU – MB997D
-
STM32F407VGT6 featuring 32-bit ARM Cortex -M4 with FPU core, 1-Mbyte Flash, 192-Kbyte RAM
-
On-board ST-LINK/V2 on STM32F407G-DISC1
-
USB ST-LINK with re-enumeration capability and three different interfaces:
-
Debug port
-
Virtual Com port
-
Mass storage
-
-
Board power supply: through USB bus or from an external 5 V supply voltage
STM32F407VET6 Development Board, Minimal System Learning Board, Cortex M4 STM32, ARM Core Board
- 100% Brand new and high-quality STM32 Board
- Model: STM32F407VET6
- Core: ARM 32 Cortex-M4 CPU.
- Debug mode: SWD.
STM32F411CEU6 Minimum System Board – Black Pill Board (Cortex-M4)
- 100% Brand new and high-quality STM32 Board
- Model: STM32F411CEU6
- Black Pill Board
- Core: ARM 32 Cortex-M4 CPU
- Debug mode: SWD
- 512K flash memory, 128K SRAM
- Reset(POR/PDR)
- 4-26MHz crystal
- 72MHz work frequency.
STM8S105K4T6 Development Board
- 100% Brand new and high-quality STM8 Board
- Model: STM8S105K4T6.
- Core: ARM 8 Cortex CPU.
- 16MHz work frequency.
- 32K flash memory, 2K SRAM.
STMicroelectronics NUCLEO-N657X0-Q STM32 Nucleo-144 Development Board
- Brand: STMicroelectronics
- Type: MCU 32-Bit
- Core Processor: ARM Cortex-M55
- Mounting Type: Fixed
- Interconnect System: Arduino R3 Shield, ST Morpho, ST Zio
STMicroelectronics NUCLEO-U575ZI-Q NUCLEO-144 STM32U575ZI Evaluation Board
- External or internal SMPS to generate Vcore logic supply
- Ethernet compliant with IEEE-802.3-2002
- USB OTG full speed or device only
- Board connectors: USB with Micro-AB or USB Type-C®Ethernet RJ45
- Arm® Mbed Enabled™ compliant
STMICROELECTRONICS STM32F0 DISCOVERY Evaluation Kit, STM32F0 MCU, On-Board ST-LINK/V2 Debugger/Programmer
- Product: STM32F0 DISCOVERY Evaluation Kit
- Processor: STM32F051R8T6
- RAM: 8KB
- Power Supply: 3V and 5V
- Flash Memory: 64KB Flash
STMicroelectronics STM32F429I-DISC1 Discovery MCU Development Kit with STM32F429ZI MCU, 2.4″ Qvga LCD 3-axis Mems Motion Sensor
-
Microcontroller: STM32F429ZIT6 (ARM® Cortex®-M4, 180 MHz, 2 MB Flash, 256 KB SRAM)
-
Integrated Debugger: ST-LINK/V2 embedded debug tool – no external programmer needed
-
Display: 2.4″ QVGA TFT LCD for graphical applications
-
Memory: 64 Mbit external SDRAM for memory-intensive projects
-
Sensors: ST MEMS gyroscope for motion detection and orientation sensing
-
USB Connectivity: USB OTG micro-AB connector (host & device support)
-
User Interface: Multiple LEDs and pushbuttons for quick prototyping
-
I/O Access: Easy access to MCU pins for hardware expansion
-
Software Support: Compatible with STM32Cube firmware, middleware, and examples
-
Applications: IoT devices, industrial controllers, multimedia systems, robotics, and embedded projects
Super Starter Kit for R3 Projects ( Tutorial+ Logo+without Battery+Plastic Box)
- This basic beginner kit with all the necessary components to jumpstart your interest in learning and making your projects.
- A great way for beginners to get started with Pure Electronics.
- All components are ready to use, no soldering is needed.
- Different Sensor modules in a kit
- All modules are packed in protective plastic bags
Super UNO R3 Starter Kit(with Tutorial+with Logo+without Battery+Plastic Box)
- Comes with a detailed and user-friendly tutorial: Free PDF tutorial with more than 22 lessons available for download
- A great way for the beginners to get started with Arduino programming
- All modules are ready to use, no soldering needed
SW-420 Normally Closed Alarm Vibration Sensor Module
- the use of the company’s production of SW-420 normally closed type vibration sensors.
- compactor output signal clean wave well, driving ability,
- 15mA rated voltage
- 3.3V-5V output
- digital switching output (0 and 1)
- a bolt-hole for easy installation small Board
- PCB dimensions: 32 mm x 14 mm using wide LM393 voltage compactor
SW1801P 3pin Normally open vibration sensor module
- The working voltage of 3.3V-5V.
- Using the company’s high-sensitivity vibration switch, the default with SW-18015P vibration sensor.
- The comparator output, the signal clean, good waveform, driving ability, more than 15mA
- With a fixed bolt hole, easy to install.
- The use of wide voltage LM393 comparator.
SW1801P 4pin Normally open vibration sensor module
- The working voltage of 3.3V-5V.
- Using the company’s high-sensitivity vibration switch, the default with SW-18015P vibration sensor.
- The comparator output, the signal clean, good waveform, driving ability, more than 15mA
- With a fixed bolt hole, easy to install.
- The use of wide voltage LM393 comparator.
