KY-021 Mini Dry Reed Pipe Module
SKU:
SEN0017
Original price was: ₹79.00.₹40.00Current price is: ₹40.00. (Excl. 18% GST)
- Model Name: KY-021
- Voltage: 3.3V to 5V
- Color: Black
- Dimension: 2.4cm x 1.5cm x 0.5cm
- Output Type: Digital
ULN2003 Driver Board Stepper Motor-Green
SKU:
COMP0028
Original price was: ₹199.00.₹40.00Current price is: ₹40.00. (Excl. 18% GST)
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
ISP Download Cable FC10P Connector (20cm)
SKU:
PRO0005
Original price was: ₹95.00.₹40.00Current price is: ₹40.00. (Excl. 18% GST)
- Product Name: Flat Ribbon Cable
- Model: FC10P
- Connector Type: Female IDC Connectors
- Withstand Voltage: 300V
- Temperature: 105C
- Pin Number: 10
- Pin Pitch: 2.54mm
- LONG :20CM (200MM)
LM2596S DC-DC Buck Converter Step Down Module – Variable Voltage (3A BUCK 3-40V TO 1.5-35V)
SKU:
POW0022
Original price was: ₹199.00.₹39.00Current price is: ₹39.00. (Excl. 18% GST)
- Input Voltage(VDC): 4 ~ 40.
- Output Voltage(VDC): 1.3 ~ 37.
- Output Current: 2A Rated, ( 3A maximum with heat sink).
- Switching Frequency: 150 kHz.
- Input reverse polarity protection.
- Built-in output short protection function.
Multi Output Voltage DC-DC 12V to 3.3V 5V 12V Power Module
SKU:
POW0007
Original price was: ₹115.00.₹39.00Current price is: ₹39.00. (Excl. 18% GST)
- Input Voltage: 12V
- Connector: 5.5mm DC Jack
- Output power on/off switch
- Two-row multiple pin outputs, easy to use and connect
- Outputs
- 3.3V DC at 800mA maximum current
- 5.0V DC at 800mA maximum current
- 12V DC (the 12V output is directly connected to the input, i.e. with 12VDC input, this output will be 12VDC; with 9VDC input, this output will be 9VDC)
Female to Female Jumper Wires 40 Pin Dupont Jumper Wire 30CM
SKU:
CAB0012
Original price was: ₹69.72.₹39.00Current price is: ₹39.00. (Excl. 18% GST)
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
- A popular choice for construction or repair
- Be used for the electronic project and Genuine Arduino product
- Flexible Breadboard Jumper Cable Wire allows you to plug and unplug easily for prototyping.
Male to Female Dupont Line 40 Pin 20cm 24AWG
SKU:
CAB0010
Original price was: ₹69.72.₹39.00Current price is: ₹39.00. (Excl. 18% GST)
- 40P colored jumper wires
- Length: 200mm
- Weight: 30 gm
- Compatible with 2.54mm spacing pin headers
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
Female to Female Jumper Wires 40 Pin Dupont Jumper Wire 20CM
SKU:
CAB0009
Original price was: ₹62.25.₹39.00Current price is: ₹39.00. (Excl. 18% GST)
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
- A popular choice for construction or repair
- Be used for the electronic project and Genuine Arduino product
- Flexible Breadboard Jumper Cable Wire allows you to plug and unplug easily for prototyping.
KY-026 The Flame Sensor Module
SKU:
SEN0012
Original price was: ₹99.00.₹39.00Current price is: ₹39.00. (Excl. 18% GST)
- Comparator chip LM393 makes module readings stable.
- Operating voltage 3.3V-5V.
- Fast Response Time
- Sensitivity adjustable
- Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
- Detection range: up to 100 cm.
- Adjustable detection range.
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
KY-024 Linear Magnetic Hall sensor
SKU:
SEN0013
Original price was: ₹99.00.₹39.00Current price is: ₹39.00. (Excl. 18% GST)
- Operating Voltage: 3.3V-5V
- Features wide range voltage comparator LM393
- Adjustable sensitivity
- Signal output indicator with the retaining bolt hole, convenient installation
- Output form digital switch output (0 and 1 high and low level)
- The output effective signal is low level
- When there is sound, outputs low level and the signal light
HX711 Weighing Pressure Sensor Module Big Size
SKU:
SEN0112
Original price was: ₹79.00.₹38.00Current price is: ₹38.00. (Excl. 18% GST)
- Output Sensitivity: 1.0 ± 0.1 mV / V.
- Two selectable differential input channels.
- On-chip active low noise PGA with the selectable gain of 32, 64 and 128.
- On-chip oscillator requiring no external component with optional external crystal.
- On-chip power-on-reset.
- Measurement Resolution: 24 bit.
GY-68 BMP180 Sensor Module
SKU:
SEN0143
Original price was: ₹180.00.₹37.00Current price is: ₹37.00. (Excl. 18% GST)
- 1.8V to 3.6V Supply Voltage
- Low power consumption – 0.5uA at 1Hz
- I2C interface
- Max I2C Speed: 3.5Mhz
- Very low noise – up to 0.02hPa (17cm)
- Fully calibrated
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
KY-033 TCRT5000 Tracking Module
SKU:
SEN0009
Original price was: ₹120.00.₹37.00Current price is: ₹37.00. (Excl. 18% GST)
- Operating Voltage: 3-5.5V
- Supply Current: ≥ 20mA
- Optimal Sensing Distance: 3mm
- Working voltage of 5V, the output of the black line low, white line of high output
- Uses Infrared Light to Detect Anti-Interference Ability
- Sensors to adopt TCRT5000 High Sensitivity, Stable Performance
- Exquisite workmanship, with the indicator
- Has a fixed bolt hole for easy installation
SW1801P 4pin Normally open vibration sensor module
SKU:
SEN0201
Original price was: ₹80.00.₹36.58Current price is: ₹36.58. (Excl. 18% GST)
- The working voltage of 3.3V-5V.
- Using the company’s high-sensitivity vibration switch, the default with SW-18015P vibration sensor.
- The comparator output, the signal clean, good waveform, driving ability, more than 15mA
- With a fixed bolt hole, easy to install.
- The use of wide voltage LM393 comparator.
4pin Thermal Thermistor Temperature Sensor Module
SKU:
SEN0095
Original price was: ₹159.00.₹36.00Current price is: ₹36.00. (Excl. 18% GST)
- Using the NTC thermistor sensor, good sensitivity.
- The comparator output signal clean waveform is good, driving ability than 15mA.
- With bolt holes for easy installation.
- Adjust the temperature distribution bit detection threshold.
- Working voltage 3.3V-5V.
- The output format: Digital switching output (0 and 1).
- Using a wide voltage LM393 comparator.
3pin Thermal Thermistor Temperature Sensor Module
SKU:
SEN0094
Original price was: ₹159.00.₹36.00Current price is: ₹36.00. (Excl. 18% GST)
- Adopt the NTC thermistor sensor, sensitivity is good
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma.
- With potentiometer to adjust the temperature detection threshold
- Working voltage: 3.3 V to 5 V
- Output form: digital switch output (0 and 1)
- It has a fixed bolt hole, convenient installation
KY-036 Metal Touch Sensor/Human Body Touch Sensor Module
SKU:
SEN0014
Original price was: ₹199.00.₹36.00Current price is: ₹36.00. (Excl. 18% GST)
- Working voltage: for DC 5V
- Dimensions: 43 x 16 x 15 mm / 1.69 x 0.63 x 0.59 inch
- Single channel signal output
- Low level output signal used for human body touch sensor alarm
- Adjustable sensitivity
3-6V DC Motor with Wire
SKU:
ROBO0018
Original price was: ₹49.00.₹35.00Current price is: ₹35.00. (Excl. 18% GST)
- Small size, suitable for toy applications and Arduino projects
- Operates at 5V, making it compatible with common electronic devices
- High-speed motor, suitable for applications requiring fast rotation
- Can handle a rated torque of 29.2 g.cm
- Provides an output power of 3.47W
LM393 Test Motor Speed Counter Sensor Groove Coupler Encoder Module
SKU:
SEN0136
Original price was: ₹101.00.₹35.00Current price is: ₹35.00. (Excl. 18% GST)
- Using imported groove optical coupling sensor, width 5mm.
- It has the output state light, if output high level, the lights are off. if output low level, it on.
- If it covered, it will output high level; otherwise, its output low level.
- Good signal and waveform, with a strong driving ability for more than 15mA.
- Equipped with a fixed bolt hole, easy install.
- Use the LM393 wide voltage comparer.
4PIN IR Infrared Flame Detection Sensor Module
SKU:
SEN0090
Original price was: ₹109.00.₹35.00Current price is: ₹35.00. (Excl. 18% GST)
- High Photo Sensitivity
- Fast Response Time
- Sensitivity adjustable
- Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
- Detection range: up to 100 cm.
- Adjustable detection range.
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
- Comparator chip LM393 makes module readings stable.
- Operating voltage 3.3V-5V.
- Digital and Analog Output.
- Power indicator and digital switch output indicator.
