NUCLEO-H755ZI-Q STM32H755ZI MCU STM32 Nucleo-144 Development Board
SKU:
DEV0081
Original price was: ₹9,999.00.₹4,889.00Current price is: ₹4,889.00. (Excl. 18% GST)
- STM32 microcontroller in an LQFP144, TFBGA225, or VFBGA264 package
- 3 user LEDs
- 1 user push-button and 1 reset push-button
- 32.768 kHz crystal oscillator
X-NUCLEO-IHM03A1 PowerSTEP01 STMicroelectronics Stepper Motor Driver for STM32 Nucleo Board
SKU:
DEV0047
Original price was: ₹3,999.00.₹1,599.00Current price is: ₹1,599.00. (Excl. 18% GST)
- Voltage range from 10.5 V to 85 V
- Phase current up to 10 A rms
- Power OK and fault LEDs
- Up to 1/128 micro-stepping
- Programmable speed profile and overcurrent protection
- Sensorless stall detection
- Adjustable output slew rate
- Overtemperature protection
- Compatible with Arduino UNO R3 connector
- Compatible with STM32 Nucleo boards
- Suitable for multi-motor solution
- RoHS compliant
CR2032 3V Non rechargeable Round Lithium Coin Cell
SKU:
POW0008
Price range: ₹70.00 through ₹150.00 (Excl. 18% GST)
- High and Stable voltage (3V)
- A full line up for use in a wide variety of applications
- No mercury added
- Useful in a wide range of temperatures (-30°C to +60°C)
- Very high weight-to-power ratio
- Manganese dioxide material
- High capacity long Lasting life.
- Low self-degradation rate and superior storability
Select options
This product has multiple variants. The options may be chosen on the product page
GYGPSV1 NEO-M8N GPS Module, subsistute for NEO-6M GY- NEO8MV2 (with Battery）
SKU:
SEN0196
Original price was: ₹1,800.00.₹800.00Current price is: ₹800.00. (Excl. 18% GST)
- Antenna Size : approx. 26 x 26 x 9 (LxWxH) mm.
- Module Size : approx. 26 x 36 x 4 (LxWxH) mm.
- Net weight : approx. 16 gm.
- Gross weight : approx. 17 gm.
- Mounting : approx. 3 mm.
- The default baud rate : 9600.
- Flash memory: 64KB.
UNO R3 SMD ATMega328P CH340 Arduino Compatible Development Board
SKU:
DEV0023
Original price was: ₹520.41.₹202.54Current price is: ₹202.54. (Excl. 18% GST)
- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
Pro Mini ATMEGA328P 5V/16M (Official Version)
SKU:
DEV0031
Original price was: ₹390.00.₹202.54Current price is: ₹202.54. (Excl. 18% GST)
- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
SW1801P 3pin Normally open vibration sensor module
SKU:
SEN0200
Original price was: ₹80.00.₹32.00Current price is: ₹32.00. (Excl. 18% GST)
- The working voltage of 3.3V-5V.
- Using the company’s high-sensitivity vibration switch, the default with SW-18015P vibration sensor.
- The comparator output, the signal clean, good waveform, driving ability, more than 15mA
- With a fixed bolt hole, easy to install.
- The use of wide voltage LM393 comparator.
SW1801P 4pin Normally open vibration sensor module
SKU:
SEN0201
Original price was: ₹80.00.₹36.58Current price is: ₹36.58. (Excl. 18% GST)
- The working voltage of 3.3V-5V.
- Using the company’s high-sensitivity vibration switch, the default with SW-18015P vibration sensor.
- The comparator output, the signal clean, good waveform, driving ability, more than 15mA
- With a fixed bolt hole, easy to install.
- The use of wide voltage LM393 comparator.
Raindrops Detection Sensor Module
SKU:
SEN0066
Original price was: ₹125.00.₹46.00Current price is: ₹46.00. (Excl. 18% GST)
- Operating voltage: 5V
- Provide both digital and analog output
- Adjustable sensitivity
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- Bolt holes for easy installation
Water Flow Sensor (Sea) YF-S201 Flowmeter G1/2 1- 30L/min Black 5-24V
SKU:
SEN0122
Original price was: ₹329.00.₹145.00Current price is: ₹145.00. (Excl. 18% GST)
- Working Voltage: 5 to 18V DC (min tested working voltage 4.5V).
- Max current draw: 15mA @ 5V.
- Working Flow Rate: 1 to 30 Liters/Minute.
- Maximum water pressure: 2.0 MPa.
- Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min).
TCS3200/ TCS230 Color Recognition Sensor Module
SKU:
SEN0118
Original price was: ₹520.00.₹310.00Current price is: ₹310.00. (Excl. 18% GST)
- Operating Voltage: 3V-5V
- High-resolution conversion of light intensity to frequency.
- Chip pins all has drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable color and full-scale output frequency.
- Communicate directly with a microcontroller.
- Low-profile surface mount package.
WEMOS SHT30 I2C Digital Temperature and Humidity Sensor module
SKU:
SEN0116
Original price was: ₹450.00.₹255.00Current price is: ₹255.00. (Excl. 18% GST)
- I2C Interface
- Two user selectable addresses
- Typical accuracy ±3%RH and ±0.3°C
Acrylic Fixed Bracket For HC-SR04 Ultrasonic Module (without screw)
SKU:
SEN0044
Original price was: ₹150.00.₹40.00Current price is: ₹40.00. (Excl. 18% GST)
- Acrylic Body.
- Easy to install.
- Attractive black color.
FT232RL FTDI USB to TTL Serial Module
SKU:
COM0038
Original price was: ₹250.00.₹110.00Current price is: ₹110.00. (Excl. 18% GST)
- IC Chip: FT232RL
- Support 3.3V, 5V
- Interface: Mini USB
- Standard interface layout, compatible with a variety of Arduino’s such as the Pro Mini
- Original FTDI FT232 chip, stable performance
- USB power has current protection, using 500MA self-restore fuse
- RXD/TXD transceiver communication indicator
- With power, sending, receiving indicator, and working status LED indicators
- With 3.3V and 5V TTL Level supply options
- USB to serial TTL module, download STC SCM
KY-015 DHT11 Temperature and Humidity Sensor Module
SKU:
SEN0007
Original price was: ₹180.00.₹55.00Current price is: ₹55.00. (Excl. 18% GST)
- The sensor adopts DHT11
- Working voltage 3.3V-5V
- Humidity measurement range: 20%-95% (0-50 degrees range)
- Humidity measurement accuracy: ±5.0%RH
- Temperature measurement range: 0 degrees -50 degrees
- Temperature measurement accuracy: ±2.0degree.
- Power indicator (red)
- output form digital output
- with fixed bolt holes, easy to install
DHT11 Digital Temperature and Humidity Sensor not Original ASAIR
SKU:
SEN0069
Original price was: ₹154.00.₹78.00Current price is: ₹78.00. (Excl. 18% GST)
- Temperature Range: Measures temperature from 0°C to 50°C with an accuracy of ±2°C.
- Humidity Range: Measures relative humidity from 20% to 80% RH with an accuracy of ±5% RH.
- Single-Wire Interface: Uses a simple single-wire interface for easy integration with microcontrollers and electronics projects.
- Affordable and Compact: Low-cost, compact design suitable for basic applications.
- Power Requirements: Operates within a 3.5V to 5.5V range with low power consumption (1-2mA in normal operation).
- Applications: Ideal for basic temperature and humidity monitoring in weather stations, HVAC systems, and greenhouses.
- Response Time: Moderate response time of 1-2 seconds for each reading.
- Limited Accuracy and Performance: Less accurate and slower than higher-end sensors like the DHT22.
- Less Durability: May not perform well in extreme temperature and humidity conditions compared to more advanced models.
- Non-Original Variations: The sensor may have slight differences in calibration and performance compared to the original ASAIR version.
The Most Powerful Starter Kit(with Tutorial+with KS Logo +without Battery+Plastic Box)
SKU:
SEN0169
Original price was: ₹3,842.07.₹1,899.00Current price is: ₹1,899.00. (Excl. 18% GST)
- This basic beginner kit with all the necessary components to jumpstart your interest in learning and making your projects.
- A great way for beginners to get started with Pure Electronics.
- All components are ready to use, no soldering is needed.
- Different Sensor modules in a kit
- All modules are packed in protective plastic bags
NUCLEO-L432KC Development Board, STM32 Nucleo-32, STM32L432KC MCU Eval Board, On Board Debugger, Arduino Nano Extension, Reset Push Button
SKU:
DEV0080
Original price was: ₹1,900.00.₹1,450.00Current price is: ₹1,450.00. (Excl. 18% GST)
- Product: NUCLEO-L432KC Development Board
- Core Architecture: ARM
- Extension with Arduino™ nano connectivity
- Core Sub-Architecture: Cortex-M4
- Silicon Family Name: STM32L4
- Silicon Core Number: STM32L432KC
- Silicon Manufacturer: STMicroelectronics
NUCLEO-L011K4 Development Board, STM32 Nucleo-32, STM32L011K4 MCU Eval Board, On Board Debugger, Arduino Nano Extension, Reset Push Button
SKU:
DEV0079
Original price was: ₹1,900.00.₹1,300.00Current price is: ₹1,300.00. (Excl. 18% GST)
- Product: NUCLEO-L011K4 Development Board
- Core Architecture: ARM
- Extension with Arduino™ nano connectivity
- Core Sub-Architecture: Cortex-M0+
- Silicon Family Name: STM32L0
- Silicon Core Number: STM32L011K4
- Silicon Manufacturer: STMicroelectronics
NUCLEO-L031K6 Development Board, STM32 Nucleo-32, STM32L031K6 MCU Eval Board, On Board Debugger, Arduino Nano Extension, Reset Push Button
SKU:
DEV0078
Original price was: ₹1,900.00.₹1,199.00Current price is: ₹1,199.00. (Excl. 18% GST)
- Product: NUCLEO-L031K6 Development Board
- Core Architecture: ARM
- Extension with Arduino™ nano connectivity
- Core Sub-Architecture: Cortex-M0+
- Silicon Family Name: STM32L0
- Silicon Core Number: STM32L031K6
- Silicon Manufacturer: STMicroelectronics
