Tactile Push Button Switch 6x6x5mm 4pin
- Ideal for Through-hole applications.
- Shaft Shape: Round
- Used in the fields of electronic products, household appliances and more.
-
This light touch switch is waterproof, prevent oil, anti-pollution, anti-static interference.
-
High precision mechanism design offers acute operation and long service life.
-
Compact and lightweight, easy to carry and dismantling.
-
Good electrical conductivity.
Official LP-AM261 AM261x Arm®-based MCU General-Purpose LaunchPad™ Development Kit
-
Official TI LaunchPad™ for AM261x Arm®-based microcontrollers
-
Powered by Arm® Cortex®-R52 for high performance and real-time control
-
Low-cost and general-purpose development platform
-
Supports BoosterPack™ plug-in modules for easy expansion
-
On-board debug interface for faster prototyping
-
Multiple I/O interfaces – UART, SPI, I²C, CAN, GPIO
-
Compatible with TI MCU LaunchPad™ ecosystem
-
Ideal for industrial control, IoT, and automation applications
USB Blaster (ALTERA CPLD / FPGA download cable)
- Stably support SignalTap II embedded logic analyzer function, no mistake while crawling data.
- Fully support all Altera products such as CPLD: MAX3000, MAX7000, MAX9000 and MAXII.
- FPGA: Stratix, StratixII, StratxIII, Cyclone, CycloneII, CycloneIII, ACEX1K, APEX20K and FLEX10K etc.
- Active serial configuration device: EPCS1, EPCS4, EPCS16, EPCS64 etc.
- Enhanced configuration devices: EPC1, EPC4.
- Supports 3 download mode: AS, PS and JTAG
Official 7Semi STM32G0B1RET6 Development Board – Arm Cortex-M0+ MCU, 512KB Flash, 144KB RAM
- Beginner-friendly layout with labeled headers and USB power
- CAN (FDCAN) support – ideal for automotive and industrial use
- Built-in ADC, DAC, PWM, and timers – ready for sensing and control
- Up to 64 GPIO pins – tons of I/O flexibility for your sensors, displays, and peripherals
- Plug-and-play USB-C for input power with onboard reset/user buttons and LED indicators
RS422 to TTL Power Supply Converter Board
- RS422 interface, two-way communication. B Y Z A ultra far transmission 1000 meters
- The module has ESD 15KV protection.
- Onboard to increase the limit of 10 ohms current limiting current protection.
- Module with TVS diode. Anti lightning, peak voltage.
- The module has 120-ohm termination resistors, which can effectively reduce the interference of long-range communication.
STMicroelectronics STM32F429I-DISC1 Discovery MCU Development Kit with STM32F429ZI MCU, 2.4″ Qvga LCD 3-axis Mems Motion Sensor
-
Microcontroller: STM32F429ZIT6 (ARM® Cortex®-M4, 180 MHz, 2 MB Flash, 256 KB SRAM)
-
Integrated Debugger: ST-LINK/V2 embedded debug tool – no external programmer needed
-
Display: 2.4″ QVGA TFT LCD for graphical applications
-
Memory: 64 Mbit external SDRAM for memory-intensive projects
-
Sensors: ST MEMS gyroscope for motion detection and orientation sensing
-
USB Connectivity: USB OTG micro-AB connector (host & device support)
-
User Interface: Multiple LEDs and pushbuttons for quick prototyping
-
I/O Access: Easy access to MCU pins for hardware expansion
-
Software Support: Compatible with STM32Cube firmware, middleware, and examples
-
Applications: IoT devices, industrial controllers, multimedia systems, robotics, and embedded projects
ATMEGA16U2 Arduino Mega 2560 R3 Improved Version CH340G Board
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB
- Clock Speed: 16 MHz
2×40 Pin bend Pin Header 2.54mm
- Connector Type: Male header with 2 row of 40 pins
- Pin Pitch: 2.54mm (0.1 inches)
- Pin Configuration: 2×40 configuration, meaning a double row of 40 pins
- Mounting angle: Straight needle
- Color: Black
PCF8574T I2C I/O Extension Board
- Interface: I2C
- Operating Voltage: 3-5VDC
- Ports: 8-bit Parallel Ports
- Can be used with Arduino and Raspberry Pi
PT100 Platinum Resister Temp Probe Temperature Sensor 2 wires/1 Meter
- Model number: FTARP05 series
- Mounting form Polish rod probe
- The Probe material: Stainless steel
- Probe diameter: 4mm
- Length of the probe: 30mm
- Cabel material Silver plated copper (not insulated), PTFE Silver plated copper (Waterproof, insulated)
- Accuracy ±(0.3°C+0.5%|t|)
- Thermal response time: <0.5s
NUCLEO-L496ZG Development Board, STM32 Nucleo-144, STM32L496ZG MCU, Arduino Uno & ST Morpho Connectivity
- Product: NUCLEO-L496ZG Development Board
- Source options for power supply are USB charger, VIN (7 – 12V) from ST Zio connector
- ST-LINK/V2-1 standalone kit capability
- USB re-enumeration capability, virtual COM port, mass storage, debug port
- 1Mbyte STM32 flash memory size, MCU with SMPS function
NodeMcu Lua WIFI V2 Internet Development Board Based on ESP8266 (CP2102 + 30PIN + Type C)
-
Powerful ESP8266 Chip – Reliable Wi-Fi microcontroller for IoT projects
-
Modern Type-C Interface – Faster and more stable than micro-USB
-
30 GPIO Pins – Flexible for connecting sensors, relays & modules
-
Multiple Programming Options – Supports Arduino IDE & Lua
-
Stable Operation – CH340 USB-to-serial converter & voltage regulator
-
Ideal for IoT Applications – Smart home, automation & wireless networking
Official CYUSB3KIT-004 Cypress Semiconductor CYUSB301x EZ-USB FX3™ USB 3.0 Host/Controller Interface Evaluation Board
T856-C Power Bank Charging Circuit Module (5V USB Step Up Type C Charging Module)
Original price was: ₹99.00.₹24.58Current price is: ₹24.58. (Excl. 18% GST)- Input voltage: 3.7V~5.5V
- Charging current: up to 1A
- Output current: up to 1A
- Output voltage: 5V
- BAT discharge termination voltage: 2.9V
- Preset 4.2V charging voltage with an accuracy of ±1%
- Discharge efficiency: 85% (input 3.7V, output 5V/1A)
Matrix LED Shield V1.0.0 for WEMOS D1 Mini 8×8 Matrix Lattice Red LED Module
- 8×8 lattice red LED module
- The module requires a 3.3V and 5V power supply (3.3V and 5V need to be powered at the same time)
- LED dot matrix glows red
- 8 step adjustable intensity
L293D Motor Driver Board
- 2 interface for 5V Servo connected to For Arduino’s high-resolution dedicated timer – no jitter.
- Can drive 4 DC motors or 2 stepper motors or 2 Servo.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
- 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 16V DC
5 Channel Tracking Sensor Tracking Module Infrared Sensor TCRT5000L
- TCRT5000L 5 Channel Tracking Sensor Tracking Module Infrared Sensor
- High-Quality Tracker Sensor
- The module is a convenient carrier for eight IR emitter and receiver pairs evenly paced.
- Distance between each IR Sensor: 15mm
- Uses 5 sensors for best resolution
- Great useful in building fast line following and grid navigating robots
NUCLEO-L432KC Development Board, STM32 Nucleo-32, STM32L432KC MCU Eval Board, On Board Debugger, Arduino Nano Extension, Reset Push Button
- Product: NUCLEO-L432KC Development Board
- Core Architecture: ARM
- Extension with Arduino™ nano connectivity
- Core Sub-Architecture: Cortex-M4
- Silicon Family Name: STM32L4
- Silicon Core Number: STM32L432KC
- Silicon Manufacturer: STMicroelectronics
GP2Y0A710K0F 100cm to 500cm IR Distance Sensor with Cable
- Model: GP2Y0A02YK0F (100to 550 cm)
- Operating Voltage (VDC): 4.5 ~ 5.5
- Average Current Consumption (mA): 33
- Sampling Rate: 21-26Hz
- Distance Measuring Range (CM): 100 ~ 550
- Output Type: Analog Voltage
- Supply voltage:5V
- Current: 33-50mA
