5V Ultrasonic Sensor with RGB
- Product: Ultrasonic Sensor
- Operating Voltage: 3.5V to 5.5V
- Work Temperature Range: -40℃ to 100℃
- Resonant Frequency: 40KHz; 4
- Light changes based on input.
- Suitable for diverse projects.
- Easy to incorporate.
Mini USBISP USBASP Programmer Aluminum for 51 single chip AVR (Random Colour)
- USBASP Board
- Mini size, with cover
- Support USB 1.0 or 2.0 interface
- Support S51 and the AVR chip programmer. fast and stable
- Standard IDC 10PIN interface
- Support software: AVR_FIGHTER, Progisp1.72
Official 7Semi INA240A2 4~80V Bidirectional Current Sense Amplifier Breakout, 50V/V Gain
- Fixed 50 V/V gain for accurate current measurement
-
Wide common-mode voltage range: –4V to 80V
-
Bidirectional current sensing support
-
Enhanced PWM rejection for noisy environments
-
Ideal for motor drives and power systems
-
Compact breakout for easy prototyping
0.96 Inch SPI 6-Pin OLED Display Module (WHITE)
- Size: 0.96 inch
- Resolution: 128 x 64
- Controlling Driver Chip: SSD1306
- Display Area: 21.74 x 10.86mm
- Driving Voltage: 3.3-5V
- Operating Temperature: -40~70 Celsius
- Interface Type: SPI
- Light Color: WHITE
- Number of pins: 6
AM2320 Digital Temperature & Humidity Sensor
- Standard I2C and 1-Wire bus output (note we have not tried 1-Wire)
- Signal transmission distance up to 20 meters
- I2C interface (address 0x5c)
- 3.3V / 5V tolerant
- 0.1 C / % RH (relative humidity) resolution (+/- 0.5 C, 3% RH)
Digi ConnectCore® MP133 STM32MP133C with Arm® Cortex®-A7 Development Kit – 602-CC-WMP133-KIT-ND (included Dev Board)
- Gigabit Ethernet + 10/100 Mbit Ethernet
- (2) USB Host, 1 x USB OTG
- (2) CAN-FD
- MicroSD card
- PCIe minicard with SIM card holder
- MikroE Click boards™ connector
- Console over USB
- Digi XBee (including Digi XBee Cellular support)
- Audio (microphone and headphones)
- User buttons and LEDs
Official NUCLEO-C051C8 STM32C051C8 Nucleo-64 STM32C0 ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board
- STM32C051C8 MCU – ARM Cortex-M0+ with 64KB Flash.
- On-board ST-LINK – Built-in USB debugger/programmer.
- ARDUINO & ST morpho support – Easy hardware expansion.
- USB or external power – Flexible power supply options.
- STM32Cube & IDE support – Ready-to-use software and tools.
Official 7Semi EC200U-CN LTE 4G GNSS Ultra-compact Nano Modem
-
Official 7Semis 4G LTE USB Nano Modem
-
Powered by Quectel EC200U-CN LTE Cat-1 module
-
Supports LTE-FDD, LTE-TDD, and GSM/GPRS networks
-
Plug-and-play USB connectivity for PC and laptop
-
Ultra-compact size for space-constrained designs
-
Ideal for IoT, M2M, tracking, and industrial applications
-
Includes wide-band 4G LTE antenna (700–2700 MHz)
-
IPEX (u.FL) connector with 3M adhesive mounting
ACEBOTT QA019 ESP32 Max V3.0 with 1m Type-C Cable
- Model: ACEBOTT ESP32 Max V3.0
- Type: Microcontroller board
- Processor: 240 MHz dual-core
- Memory: 520 KB RAM, 4MB flash
- Connectivity: Wi-Fi, Bluetooth LE
Official MSP-EXP430FR2355 – MSP430FR2355 LaunchPad Development Kit
-
Powered by MSP430FR2355 ultra-low-power Value Line MCU
-
Includes 32KB FRAM & 4KB SRAM for flexible memory allocation
-
On-board debug probe for easy programming and energy measurement
-
Features 12-bit ADC, DACs, PGAs & enhanced comparators (eCOMPs)
-
Smart Analog Combo for advanced signal chain prototyping
-
Ambient light sensor & external analog connector included
-
Two user-programmable buttons and two LEDs
-
Ideal for data logging, sensor applications, and low-power systems
-
24MHz operation for faster processing in energy-constrained applications
-
Compatible with TI’s Code Composer Studio™ and IAR Embedded Workbench
ACEBOTT ESP8266 Quadruped Bionic Spider Robot – QD020
- Product type – Programmable Robot Kit
- Brand – ACEBOTT
- Model – QD020
- Robot type – Quadruped Bionic Spider Robot
- Microcontroller – ESP8266
- Programming language – C/C++
- Development platform – Arduino IDE
- Connectivity – WiFi
- Mounting type – Programmable Development Kit
- Application – STEM Education, Robotics and Electronic Projects
ZK-4KX DC Step Up and Step Down Adjustable Voltage Regulator with Dual Display (DC DC Buck Boost Converter CC CV 0.5-30V 4A Adjustable)
- Model: ZK-4KX
- Material: Fiber glass board, Electronic component
- Input Voltage: 5.0-30v
- Output Voltage: 0.5-30v
- Voltage Display resolution: 0.01V
- Current Display resolution: 0.001A
- Conversion Efficiency: about 88%
- Output Power: Natural heat dissipation 35W; Strengthen heat dissipation 50W
- Output Current: It can work stably at 3A for a long time, and can reach 4A under enhanced heat dissipation.
- Soft Start: Yes (The soft start may fail when it starts with high power and load module.)
LAUNCHXL-F2800157 – C2000 MCU F2800157 LaunchPad Development Kit
- Microcontroller: TMS320F2800157
- Clock Speed: 120 MHz
- Debugger: XDS110 Onboard
- Connectivity: USB, GPIO, BoosterPack headers
- Operating Voltage: 3.3V / 5V compatible
Easy-Plug ACEBOTT Smart Home Education Kit – Level 1 (3 in 1 Projects) – QE023
- Brand : ACEBOTT
- Model Number : QE023
- Mounting Type : ESP32 Intelligent Transport Kit for arduino
- Microprocessor : ESP8266
ACEBOTT Bionic Biped Robot Kit for Arduino ESP32 – QD021
- Brand Name : ACEBOTT
- Model Number : QD021
- Category : STEAM & STEM Kit, STEAM & STEM Toy, Robot Kit
- Type : Bionic Biped Robot Kit
- Recommended Age : For Age 12+ & Makers
- Application : Scientific & Educational Toys, Home STEAM & STEM Education, Classroom STEAM & STEM Education
- Controller Boards : ESP32
- Programming Arduino, ACECode
6Pin PL2303HXD USB to TTL/RS232
- Supports RS-232 serial interface with Programmable baud rate from 75 bps to 12 Mbps
- Compatible with the RS422/RS485 interface
- Extensive flow control mechanism like adjustable high/low watermark level, automatic hardware or software flow control, and inbound data buffer overflow detection.
-
The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB
- The TTL-232R cables are a family of USB to TTL serial UART converter cables incorporating FTD’s FT232RQ USB to Serial
- Cables are FCC, CE, RoHS compliant and are available at TTL levels 3.3V
-
It is USB 2.0 full speed compatible. The USB side of the cable is USB powered.
Official NUCLEO-F410RB STM32F410 Nucleo-64 STM32F4 ARM Cortex-M4 MCU 32-Bit Embedded Evaluation Board
- USB VBUS or external source (3.3V, 5V, 7 to 12V) and power management access point
- USB communication (LD1), user LED (LD2), power LED (LD3)
- Two push buttons – USER and RESET
- USB re-enumeration capability – virtual com port, mass storage, debug port
- Supported by wide choice of IDEs including IAR, Keil, GCC-based IDEs
X-NUCLEO-IHM03A1 PowerSTEP01 STMicroelectronics Stepper Motor Driver for STM32 Nucleo Board
- Voltage range from 10.5 V to 85 V
- Phase current up to 10 A rms
- Power OK and fault LEDs
- Up to 1/128 micro-stepping
- Programmable speed profile and overcurrent protection
- Sensorless stall detection
- Adjustable output slew rate
- Overtemperature protection
- Compatible with Arduino UNO R3 connector
- Compatible with STM32 Nucleo boards
- Suitable for multi-motor solution
- RoHS compliant
Texas Instruments LAUNCHXL-RM42 Hercules RM42L432 LaunchPad Development Kit
- Microcontroller: RM42L432
- USB powered
- On board USB XDS100v2 JTAG debug
- On board SCI to PC serial communication
- Two LEDs
- Reset switches
- Ambient light sensor
W25Q32 Large Capacity Flash Storage Module
- Support SPI interface
- Provide STM32 test code
-
Capacity: 32M-bit / 4M-byte
-
The clock frequency is less than 104MHz
-
Operating voltage: 2.7~3.6V
-
Size: 14mm * 15mm
