GYGPSV1 NEO-M8N GPS Module, subsistute for NEO-6M GY- NEO8MV2 (with Battery）
- Antenna Size : approx. 26 x 26 x 9 (LxWxH) mm.
- Module Size : approx. 26 x 36 x 4 (LxWxH) mm.
- Net weight : approx. 16 gm.
- Gross weight : approx. 17 gm.
- Mounting : approx. 3 mm.
- The default baud rate : 9600.
- Flash memory: 64KB.
LAUNCHXL-F28069M Piccolo F28069 MCU, InstaSPIN-MOTION & InstaSPIN-FOC, Motor Control
-
Support for InstaSPIN-FOC and InstaSPIN-MOTION
-
USB-powered development environment
-
On-board JTAG emulator for easy debugging
-
Compatible with multiple TI BoosterPacks
-
Designed for sensorless field-oriented control of PMSM, ACIM, and BLDC motor
Official NUCLEO-8L152R8 Development Board, STM32 Nucleo-64, STM8L152R8 MCU Eval Board, On Board Debugger, Arduino Nano Extension, Reset Push Button
-
Microcontroller: STM8L152R8 MCU in LQFP64 package
-
Development Board Type: STM8 Nucleo-64
-
Connectivity: Arduino™ Uno V3 compatible and ST morpho headers
-
Power Efficiency: Low-power STM8 microcontroller suitable for energy-sensitive applications
-
Prototyping: Affordable and flexible platform for rapid development and experimentation
-
Expansion: Supports a wide range of shields, sensors, and modules for added functionality
-
Ease of Use: Open development platform with access to STM8 software libraries and firmware examples
-
Applications: Ideal for IoT devices, smart gadgets, educational projects, and embedded system prototyping
Texas Instruments LAUNCHXL2-570LC43 Hercules TMS570LC43x LaunchPad Development Kit
- USB powered and capability for external 5v supply
- On board USB XDS_ICDIc2 JTAG debug
- IEEE 1588 precision time Ethernet PHY DP83630
- On board SCI to PC serial communication
- User programmable push buttons
- Reset switches
- LEDs and Analog input
NUCLEO-G491RE Development Board, STM32 Nucleo-64, STM32G491RE MCU, Arduino Uno & ST Morpho Connectivity
- Product: NUCLEO-G491RE Development Board
- Core Architecture: ARM
- Core Sub-Architecture: Cortex-M4
- Silicon Family Name: STM32
- Silicon Core Number: STM32G491RET6U
MQ-5 liquefied gas Methane Gas Sensor Module
- Model: MQ-5
- Operating Voltage: 5V DC
- Operating Temparature:-20~40 degree celcius
5V 3A Adapter Charger EU Plug
- Input Voltage (V): 100 ~ 270 VAC @50 ~ 60Hz.
- Input current (mA): 100.
- Output Power: 5V 3A.
- Load regulation (%): ±5.
- Input Plug: 2-Pin EU type.
- Output Plug: DC Jack 5.5mm.
NEO-6M GPS Module with EEPROM for Aero Quad with Antenna for Flight Control GY-NEO6MV2 （with Battery）
- 5Hz position update rate
- Operating temperature range: -40 TO 85°CUART TTL socket
- EEPROM to save configuration settings
- Rechargeable battery for Backup
- The cold start time of 38 s and Hot start time of 1 s
- Supply voltage: 3.3 V
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600)
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
- Separated 18X18mm GPS antenna
Official 7Semi INA219 3-Channel DC Current Sensor Breakout – 26V 3.2A Max
-
3-Channel DC Current, Voltage & Power Monitoring
-
Based on TI INA219 Sensor IC
-
High-Side Current Sensing Design
-
Bus Voltage Measurement up to 26V
-
I2C Interface for Easy Integration
-
Programmable Gain & Conversion Time
-
Internal Power & Current Calculation
-
Low Power Consumption
-
Compact Breakout Board
-
Ideal for Battery, Motor, IoT & Power Systems
Official 7Semi PT100 RTD 3-Wire Temperature Sensor Amplifier Breakout Board – MAX31865
-
Official 7Semi MAX31865 RTD amplifier breakout board
-
Supports PT100 and PT1000 temperature sensors
-
Optimized for 3-wire RTD configuration
-
Compatible with 2-wire and 4-wire RTD sensors
-
High-accuracy RTD-to-digital conversion
-
SPI interface for easy microcontroller integration
-
Built-in fault detection for open and short circuits
-
Compact and reliable design for industrial use
NUCLEO-G070RB Development Board, STM32 Nucleo-64, STM32G070RB MCU, Arduino Uno & ST-Link Debugger
- STM32 microcontroller in LQFP64 package
- External SMPS to generate Vcore logic supply (only available on ‘-P’ suffixed boards)
- 1 user LED shared with Arduino™
- 1 user and 1 reset push-buttons
TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino
- 4-digit 7-segment LED display showing numbers (0-9) and some letters (A, B, C, etc.).
- Managed by TM1637 driver chip for simplified interfacing.
- Uses I2C protocol with only two wires (SDA and SCL) to connect to the microcontroller.
- Compact design with 0.36-inch digit height per segment.
1.3 Inch SPI 6-Pin OLED Display Module (BLUE)
- Size: 1.3 inch
- Resolution: 128 x 64
- Controlling Driver Chip: SSH1106
- Display Area: 21.74 x 10.86mm
- Driving Voltage: 3.3-5V
- Operating Temperature: -40~70 Celsius
- Interface Type: SPI
- Light Color: BLUE
- Number of pins: 6
Official 7Semi SC18IM704 UART to I2C Bus Bridge Breakout
-
Official 7Semi SC18IM704 UART to I2C Bus Bridge Breakout
-
Enables seamless UART to I2C protocol conversion
-
Supports UART baud rates up to 460.8 kbps
-
256-byte FIFO buffer for reliable data transfer
-
ASCII-based command interface for easy control
-
User-configurable GPIO pins for added flexibility
-
Ideal for embedded systems and industrial applications
Official Silicon Labs XG22-EK2710A EFR32MG22E Explorer Kit (BRD2710A)
- Based on EFR32MG22E224F512IM40 2.4 GHz Wireless SoC
- +6 dBm, 512 kB Flash, 32 kB RAM, QFN48
- Two LEDs and two push buttons
- Reset button
- USB connector for power and debug connection
- On-board SEGGER J-Link debugger
- Virtual COM port
- Packet Trace Interface (PTI)
- Breakout pads for GPIO access and connection to external hardware
- Third-party add-on connectors
- mikroBUS™ socket
- Qwiic® connector
Official Texas Instruments LP-MSPM0L1117 LaunchPad™ Development Kit for 32MHz Arm® Cortex®-M0+ MCU
-
Based on MSPM0L1117 Arm® Cortex-M0+ MCU
-
Compact, low-cost evaluation module (EVM)
-
On-board debug probe for programming, debugging & energy measurement
-
Includes 2 push buttons and 2 user LEDs for quick testing
-
Access to 40+ GPIO pins for external interfacing
-
Supports ADC inputs with low-pass filter placeholders for analog accuracy
-
Optimized for low-power and IoT applications
-
Fully supported by TI MSPM0 software ecosystem (Code Composer Studio™, drivers, libraries, examples)
-
Suitable for students, hobbyists, and professional developers
-
Ideal for IoT devices, automation, consumer electronics, and embedded projects
NUCLEO-WL33CC2 STM32WL33CC MCU (433MHz) Nucleo-64 Development Board
- Delivered with SMA antenna
- Three user LEDs
- Three user and one reset push-buttons
- Board connectors: USB Type-C®, ARDUINO® Uno V3 expansion connector, ST morpho extension pin headers
- Flexible power-supply options: ST-LINK USB VBUS or external sources
- On-brd STLINK-V3EC debug/programmer w/ USB re-enumeration capability:mass storage, virtual COM port
- Dedicated software tool to control and test radio transceiver
- Support of a wide choice of IDEs including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE
Official BME690 Digital Sensor Nano Breakout 2.54mm – Temperature, Humidity, Pressure, Gas | I2C
-
Measures temperature, humidity, pressure, and gas (VOC/VSC)
-
Powered by Bosch Sensortec BME690 sensor
-
Supports Bosch BSEC software for advanced air-quality processing
-
I²C interface for easy microcontroller integration
-
3.3 V operating voltage
-
Low-power design for battery-powered applications
-
Standard 2.54 mm pin pitch for breadboard compatibility
-
Compact and rugged breakout design
-
Ideal for IoT, smart home, HVAC, and air-quality monitoring
ULN2003 Driver Board Stepper Motor-Green
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
Metal Desoldering Pump Semi – Aluminium Alloy Tin Absorber
- Metal body
- High suction power
- Teflon nozzle
- Easily replaceable nozzle
- Easy to clean and maintain
- Sturdy metal rod
- Comes with an innovative Protective case
- Ideal for removing semi–aluminium alloy tin
