L298N Dual H Bridge DC Stepper Motor Driver Board
SKU:
COMP0030
Original price was: ₹319.00.₹187.00Current price is: ₹187.00. (Excl. 18% GST)
- Driver chip: L298N Dual H Bridge
- Supply voltage: VMS 5V – 35V
- Peak current IO: 2A per bridge
- Max power consumption: 20W
- Provides 4 LEDs that reflect the state of the control logic
- Independent direction, speed, and braking for each motor
CO Gas Sensor Detector Carbon Monoxide Poisoning Alarm Detector LCD Photoelectric Independent 85dB Warning High Sensitive 220V 50HZ
SKU:
SEN0050
Original price was: ₹824.00.₹470.00Current price is: ₹470.00. (Excl. 18% GST)
- LCD Displayer (optional): 4 digits LCD displayer.
- Audibility: 85dB ( at 1m distance ), Frequency 3 – 0.5KHZ.
- Standby Current: <50μA.
- Alarm Current: <50mA.
- Standby Mode: Green Led flashes once every 30 seconds.
37 Sensor Kit V2.0
SKU:
SEN0176
Original price was: ₹3,095.07.₹1,450.00Current price is: ₹1,450.00. (Excl. 18% GST)
- For beginners who are interested in Arduino
- A complete set of Arduino’s most common and useful electronic components
- Infrared sensor receiving module
- Laser sensor module
- Temperature and humidity sensor module
- Infrared sensor module
- 5v relay module
- Obstacle avoidance sensor module.
Soil Moisture Detection Humidity Sensor Module(5pin Dupond wire )
SKU:
SEN0060
Original price was: ₹139.00.₹42.00Current price is: ₹42.00. (Excl. 18% GST)
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
- Operating Voltage: 3.3V~5V
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
SKU:
DEV0025
Original price was: ₹2,288.00.₹1,355.93Current price is: ₹1,355.93. (Excl. 18% GST)
- Operating Supply Voltage- 5V
- Digital I/O- 54
- Analog I/O- 16
- Memory Size- 256kb
- Data RAM Type/Size- 8Kb
- Data ROM Type/Size- 4Kb
- Interface Type- serial\OTA
- antenna Buil-in\external antenna
- Wifi Wi-Fi 802.11 b/g/- 2.4 GHz
- USB Micro USB
- Clock Frequency- 16MHz
DIY Firefly Photosensitive Robot in Paper Box (without battery)
SKU:
ROBO0001
Original price was: ₹1,499.00.₹580.00Current price is: ₹580.00. (Excl. 18% GST)
Easy setup
Affordable cost
Good quality
All accessories in 1 box
125PCS 5 Colors 3mm 5mm Round Bright Light LED Assortment Kit
SKU:
COMP0004
Original price was: ₹700.00.₹280.00Current price is: ₹280.00. (Excl. 18% GST)
- Easy to use
- Good quality product
- Color of LEDs: Red, Yellow, Green, White, Blue
- This LED Assortment Kit from Orange has a wide scope of applications like school science experiments and DIY light projects, indoor and outdoor light decorations, and electronic or electrical use.
- Shape: Round
NUCLEO-F446ZE – STMicroelectronics Development Board, STM32F446ZE MCU, On-Board Debugger, Arduino, ST Zio and Morpho Compatible
SKU:
DEV0052
Original price was: ₹5,600.00.₹3,181.36Current price is: ₹3,181.36. (Excl. 18% GST)
- Model: STMicroelectronics Development Board, STM32F446ZE MCU (NUCLEO-F446ZE)
- Voltage: 3.3 V and 7 – 12 V
- USB OTG or full-speed device with Micro-AB connector (depending on STM32 support)
- Crystal oscillator: 32.768 KHz
Official 7Semi ARM-JTAG-20-10 – Plug-in Adapter (JTAG 20-Pin 0.1″ to 10-Pin 0.05″ Adapter 20 cm Cable)
SKU:
PRO0012
Original price was: ₹699.00.₹395.00Current price is: ₹395.00. (Excl. 18% GST)
-
Plug-in adapter compatible with ARM-USB-OCD/OCD-H/TINY/TINY-H for programming and debugging boards with small, 10-pin 0.05 inch step connectors
-
Standard ARM JTAG layout for extensive compatibility
-
Works seamlessly with Segger’s JLINK and other JTAG/SWD programmers/debuggers
-
Compact size (25×25 mm) and 20 cm JTAG cable with 0.05 inch step for user-friendly application
DIY Mini Cat Tracking Robot in Paper Box (without battery)
SKU:
ROBO0002
Original price was: ₹1,299.00.₹553.00Current price is: ₹553.00. (Excl. 18% GST)
Operating Voltage: 3V
Easy to install
Comes with a Stepwise User manual
Texas Instruments LAUNCHXL-F28P65X C2000 Real-Time MCU F28P65x LaunchPad Development Kit
SKU:
DEV0156
Original price was: ₹8,999.00.₹5,883.90Current price is: ₹5,883.90. (Excl. 18% GST)
- On-board XDS110 debug probe for real-time debug and flash programming
- 80-pin LaunchPad leveraging the BoosterPack ecosystem
- Power domain isolation for real-time debug and flash programming
- On-board CAN transceiver and connector
- EtherCAT PHYs and RJ45 connectors
- Two encoder interface (eQEP) connectors
MAX7219 8×8 LED Dot Matrix Module with cable (Red)
SKU:
DIS0034
Original price was: ₹198.00.₹135.00Current price is: ₹135.00. (Excl. 18% GST)
- Driver Chip: MAX7219
- Input Voltage: 4-5.5V
- Input Current 330mA
- Requires only 3 communication wires of MCU
- A single module can drive an 8 * 8 common cathode LED
- Connecting wires included
- Easy to interface with variety of MCU platforms
- SPI based control
KY-003 Hall Magnetic Sensor Module
SKU:
SEN0011
Original price was: ₹250.00.₹22.00Current price is: ₹22.00. (Excl. 18% GST)
- Model: KY-003
- Working voltage: DC 5V
- Small size, high sensitivity, fast response speed, good temperature performance, high accuracy and high reliability
- Automobile ignite, Brake circuit, Detection and control of position and speed
RTC DS1307 24C32 Real Time Clock Module without CR2032 Battery
SKU:
COMP0023
Original price was: ₹199.00.₹47.00Current price is: ₹47.00. (Excl. 18% GST)
- Two-wire I2C interface.
- Hour: Minutes: Seconds AM/PM.
- Day Month, Date – Year.
- DS1307 based RTC (Battery include).
- 1Hz output pin.
- Available in 8-pin DIP or SOIC
LED Scroller Matrix keyboard
SKU:
SEN0192
Original price was: ₹250.00.₹142.00Current price is: ₹142.00. (Excl. 18% GST)
- Switch Type: Momentary
- Pin Spacing (mm): 2.54
- Module Dimensions (L x W x H): 57 x 33 x 6
- Weight: 10gm
- 4×4 Matrix Keyboard Module with 16 buttons
Texas Instruments MSP-EXP430FR5969 MSP430FR5969 LaunchPad Development Kit
SKU:
DEV0155
Original price was: ₹3,999.00.₹1,984.75Current price is: ₹1,984.75. (Excl. 18% GST)
- 64KB FRAM / 2KB SRAM
- 16-Bit RISC Architecture up to 8-MHz FRAM access/ 16MHz system clock speed
- 20 pin LaunchPad standard leveraging the BoosterPack ecosystem
- 0.1F SuperCap for standalone power
- Onboard eZ-FET emulation
- 2 buttons and 2 LEDs for User Interaction
Texas Instruments LAUNCHXL-F28379D – C2000 Delfino MCUs F28379D LaunchPad Development Kit
SKU:
DEV0111
Original price was: ₹11,999.00.₹6,250.00Current price is: ₹6,250.00. (Excl. 18% GST)
-
Low-cost development kit for TMS320F2837xD, F2837xS, and F2807x microcontrollers
-
Part of TI’s C2000™ MCU LaunchPad™ ecosystem
-
Supports connection of two BoosterPack™ plug-in modules
-
Features powerful dual-core ARM Cortex-M4F architecture
-
Integrated on-board USB JTAG emulator for programming and debugging
-
Ideal for real-time control, motor control, industrial automation, and power electronics
-
Enables rapid prototyping with standardized headers and expansion options
-
Compatible with Code Composer Studio and other TI tools
LAUNCHXL-F280049C – C2000 Piccolo MCU F280049C LaunchPad Development Kit
SKU:
DEV0049
Original price was: ₹8,473.73.₹5,399.00Current price is: ₹5,399.00. (Excl. 18% GST)
- TMS320F280049C: 100 MHz C28x CPU with FPU and TMU, 256 KB Flash, InstaSPIN-FOC enabled, 3x 12-bit ADC, CAN, encoder, FSI, UART, and more
- On-board XDS110 debug probe for real-time debug and flash programming
- 80 pin LaunchPad leveraging the BoosterPack ecosystem
- Power domain isolation for real-time debug and flash programming
- Isolated CAN transceiver
- Two encoder interface connectors
- FSI interface connector
- Hardware Files are in C2000Ware at boards\LaunchPads\LAUNCHXL_F280049C
Official TMDSHSECDOCK HSEC180 controlCARD baseboard docking station
SKU:
DEV0118
Original price was: ₹11,999.00.₹7,499.00Current price is: ₹7,499.00. (Excl. 18% GST)
-
Designed for HSEC180-based C2000™ controlCARDs
-
Header-pin access to all key MCU signals
-
Integrated breadboard area for custom prototyping
-
Supports USB or 5V barrel jack power input
-
Ideal for rapid development, testing, and debugging
-
Compatible with multiple TI controlCARD models
Official 7Semi ESP32 & ESP8266 Programmer USB-C, USB to UART Converter
SKU:
PRO0014
Original price was: ₹699.00.₹361.00Current price is: ₹361.00. (Excl. 18% GST)
-
Operating voltage 5V
-
Operating current 500mA
-
Communication and interface USB and UART
-
Dimensions 12.20 × 3.45 mm
-
Weight 3 gram
-
Operating temperature −40 to +85 °C
