Texas Instruments LAUNCHXL-F280039C TMS320F280039C LaunchPad Development Kit
-
TMS320F280039C with 120 MHz C28x CPU, FPU, TMU, and 120 MHz CLA
-
384 KB flash memory and multiple peripherals
-
Three 12-bit ADCs and 16 PWM channels
-
Supports CAN (DCAN) and CAN-FD (MCAN)
-
On-board XDS110 debug probe for programming and debugging
-
100-pin LaunchPad compatible with BoosterPack modules
-
Power domain isolation for safe real-time debugging
-
On-board CAN transceiver and connector
-
Two eQEP encoder interface connectors
-
FSI interface connector
-
Hardware design files available
Official 7Semi BME690 Digital Sensor Module – Temperature, Humidity, Pressure, Gas | I2C/SPI
-
Official 7Semi BME690 digital environmental sensor module
-
Measures temperature, humidity, pressure, and gas (VOC)
-
Powered by Bosch Sensortec BME690 sensor
-
Supports I2C and SPI communication interfaces
-
Wide operating voltage 3.3V to 5V
-
Compact and low-power design
-
Easy integration with Arduino, ESP32, Raspberry Pi, STM32
-
Ideal for IoT, air-quality monitoring, and smart systems
Official 7Semi 30V 10A Single Channel Motor Driver Vikram-3010
-
6V–30V Wide Voltage Support
-
10A Continuous Current Capacity
-
Single-Channel Brushed DC Motor Driver
-
Bi-Directional Forward & Reverse Control
-
3.3V & 5V Logic Level Compatible
-
PWM & DIR Control Interface
-
Fully NMOS H-Bridge for High Efficiency
-
No External Heat Sink Required
-
Onboard Test Buttons for Quick Checking
-
Motor Output Status LEDs
-
Overcurrent & Over-Temperature Protection
-
Undervoltage Shutdown Safety
-
Logic Input Range: 1.8V–12V
-
Compatible with Arduino, Raspberry Pi & PLCs
60mm Multifunctional Welding Fixture with Magnifying Glass
- 100% brand new and high quality
- A useful Aid for soldering work or model makers
- Adjustable crocodile holding clamps
- This is a 60mm Magnifying Glass Multifunctional Welding Fixture.
- Magnifier with auxiliary clip
Raindrops Detection Sensor Module with 5V Relay Module
- Relay Operating Voltage: 5VDC
- Relay load capacity: 250V 10A (AC) 30V 10A (DC)
- Sensor PCB Dimension: 55 x 40 mm
- The LM393, use of the wide voltage comparator
- Output LED indicator
- TTL Compatible
GL-12 840 Points Solderless Breadboard
- 100% brand new and high quality
- Practical and useful
- Solderless breadboard with 840 points
- It is completely reusable and has a self-adhesive back
- Easy component placement
L298N Dual H Bridge DC Stepper Motor Driver Board
- Driver chip: L298N Dual H Bridge
- Supply voltage: VMS 5V – 35V
- Peak current IO: 2A per bridge
- Max power consumption: 20W
- Provides 4 LEDs that reflect the state of the control logic
- Independent direction, speed, and braking for each motor
Soil Moisture Detection Humidity Sensor Module(5pin Dupond wire )
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
- Operating Voltage: 3.3V~5V
CO Gas Sensor Detector Carbon Monoxide Poisoning Alarm Detector LCD Photoelectric Independent 85dB Warning High Sensitive 220V 50HZ
- LCD Displayer (optional): 4 digits LCD displayer.
- Audibility: 85dB ( at 1m distance ), Frequency 3 – 0.5KHZ.
- Standby Current: <50μA.
- Alarm Current: <50mA.
- Standby Mode: Green Led flashes once every 30 seconds.
37 Sensor Kit V2.0
- For beginners who are interested in Arduino
- A complete set of Arduino’s most common and useful electronic components
- Infrared sensor receiving module
- Laser sensor module
- Temperature and humidity sensor module
- Infrared sensor module
- 5v relay module
- Obstacle avoidance sensor module.
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
- Operating Supply Voltage- 5V
- Digital I/O- 54
- Analog I/O- 16
- Memory Size- 256kb
- Data RAM Type/Size- 8Kb
- Data ROM Type/Size- 4Kb
- Interface Type- serial\OTA
- antenna Buil-in\external antenna
- Wifi Wi-Fi 802.11 b/g/- 2.4 GHz
- USB Micro USB
- Clock Frequency- 16MHz
DIY Firefly Photosensitive Robot in Paper Box (without battery)
Easy setup
Affordable cost
Good quality
All accessories in 1 box
125PCS 5 Colors 3mm 5mm Round Bright Light LED Assortment Kit
- Easy to use
- Good quality product
- Color of LEDs: Red, Yellow, Green, White, Blue
- This LED Assortment Kit from Orange has a wide scope of applications like school science experiments and DIY light projects, indoor and outdoor light decorations, and electronic or electrical use.
- Shape: Round
NUCLEO-F446ZE – STMicroelectronics Development Board, STM32F446ZE MCU, On-Board Debugger, Arduino, ST Zio and Morpho Compatible
- Model: STMicroelectronics Development Board, STM32F446ZE MCU (NUCLEO-F446ZE)
- Voltage: 3.3 V and 7 – 12 V
- USB OTG or full-speed device with Micro-AB connector (depending on STM32 support)
- Crystal oscillator: 32.768 KHz
Official 7Semi ARM-JTAG-20-10 – Plug-in Adapter (JTAG 20-Pin 0.1″ to 10-Pin 0.05″ Adapter 20 cm Cable)
-
Plug-in adapter compatible with ARM-USB-OCD/OCD-H/TINY/TINY-H for programming and debugging boards with small, 10-pin 0.05 inch step connectors
-
Standard ARM JTAG layout for extensive compatibility
-
Works seamlessly with Segger’s JLINK and other JTAG/SWD programmers/debuggers
-
Compact size (25×25 mm) and 20 cm JTAG cable with 0.05 inch step for user-friendly application
DIY Mini Cat Tracking Robot in Paper Box (without battery)
Operating Voltage: 3V
Easy to install
Comes with a Stepwise User manual
Texas Instruments LAUNCHXL-F28P65X C2000 Real-Time MCU F28P65x LaunchPad Development Kit
- On-board XDS110 debug probe for real-time debug and flash programming
- 80-pin LaunchPad leveraging the BoosterPack ecosystem
- Power domain isolation for real-time debug and flash programming
- On-board CAN transceiver and connector
- EtherCAT PHYs and RJ45 connectors
- Two encoder interface (eQEP) connectors
MAX7219 8×8 LED Dot Matrix Module with cable (Red)
- Driver Chip: MAX7219
- Input Voltage: 4-5.5V
- Input Current 330mA
- Requires only 3 communication wires of MCU
- A single module can drive an 8 * 8 common cathode LED
- Connecting wires included
- Easy to interface with variety of MCU platforms
- SPI based control
KY-003 Hall Magnetic Sensor Module
- Model: KY-003
- Working voltage: DC 5V
- Small size, high sensitivity, fast response speed, good temperature performance, high accuracy and high reliability
- Automobile ignite, Brake circuit, Detection and control of position and speed
RTC DS1307 24C32 Real Time Clock Module without CR2032 Battery
- Two-wire I2C interface.
- Hour: Minutes: Seconds AM/PM.
- Day Month, Date – Year.
- DS1307 based RTC (Battery include).
- 1Hz output pin.
- Available in 8-pin DIP or SOIC
