Texas Instruments LAUNCHXL-F28379D – C2000 Delfino MCUs F28379D LaunchPad Development Kit
-
Low-cost development kit for TMS320F2837xD, F2837xS, and F2807x microcontrollers
-
Part of TI’s C2000™ MCU LaunchPad™ ecosystem
-
Supports connection of two BoosterPack™ plug-in modules
-
Features powerful dual-core ARM Cortex-M4F architecture
-
Integrated on-board USB JTAG emulator for programming and debugging
-
Ideal for real-time control, motor control, industrial automation, and power electronics
-
Enables rapid prototyping with standardized headers and expansion options
-
Compatible with Code Composer Studio and other TI tools
LAUNCHXL-F280049C – C2000 Piccolo MCU F280049C LaunchPad Development Kit
- TMS320F280049C: 100 MHz C28x CPU with FPU and TMU, 256 KB Flash, InstaSPIN-FOC enabled, 3x 12-bit ADC, CAN, encoder, FSI, UART, and more
- On-board XDS110 debug probe for real-time debug and flash programming
- 80 pin LaunchPad leveraging the BoosterPack ecosystem
- Power domain isolation for real-time debug and flash programming
- Isolated CAN transceiver
- Two encoder interface connectors
- FSI interface connector
- Hardware Files are in C2000Ware at boards\LaunchPads\LAUNCHXL_F280049C
Official TMDSHSECDOCK HSEC180 controlCARD baseboard docking station
-
Designed for HSEC180-based C2000™ controlCARDs
-
Header-pin access to all key MCU signals
-
Integrated breadboard area for custom prototyping
-
Supports USB or 5V barrel jack power input
-
Ideal for rapid development, testing, and debugging
-
Compatible with multiple TI controlCARD models
Official 7Semi ESP32 & ESP8266 Programmer USB-C, USB to UART Converter
-
Operating voltage 5V
-
Operating current 500mA
-
Communication and interface USB and UART
-
Dimensions 12.20 × 3.45 mm
-
Weight 3 gram
-
Operating temperature −40 to +85 °C
Official 7Semi DC-DC Buck Converter 7V -100V Input to 5V 1A Output – LM5164
-
Wide input voltage range: 6V to 100V
-
Stable 5V output with up to 1A current
-
Based on TI LM5164 high-voltage buck converter
-
Ultra-low EMI, CISPR 25 Class 5 compliant
-
Internal soft-start and thermal protection
-
Peak and valley current-limit protection
-
Adjustable switching frequency up to 1MHz
-
Ideal for industrial and battery-powered systems
GYGPSV1 NEO-M8N GPS Module, subsistute for NEO-6M GY- NEO8MV2 (with Battery）
- Antenna Size : approx. 26 x 26 x 9 (LxWxH) mm.
- Module Size : approx. 26 x 36 x 4 (LxWxH) mm.
- Net weight : approx. 16 gm.
- Gross weight : approx. 17 gm.
- Mounting : approx. 3 mm.
- The default baud rate : 9600.
- Flash memory: 64KB.
LAUNCHXL-F28069M Piccolo F28069 MCU, InstaSPIN-MOTION & InstaSPIN-FOC, Motor Control
-
Support for InstaSPIN-FOC and InstaSPIN-MOTION
-
USB-powered development environment
-
On-board JTAG emulator for easy debugging
-
Compatible with multiple TI BoosterPacks
-
Designed for sensorless field-oriented control of PMSM, ACIM, and BLDC motor
Official NUCLEO-8L152R8 Development Board, STM32 Nucleo-64, STM8L152R8 MCU Eval Board, On Board Debugger, Arduino Nano Extension, Reset Push Button
-
Microcontroller: STM8L152R8 MCU in LQFP64 package
-
Development Board Type: STM8 Nucleo-64
-
Connectivity: Arduino™ Uno V3 compatible and ST morpho headers
-
Power Efficiency: Low-power STM8 microcontroller suitable for energy-sensitive applications
-
Prototyping: Affordable and flexible platform for rapid development and experimentation
-
Expansion: Supports a wide range of shields, sensors, and modules for added functionality
-
Ease of Use: Open development platform with access to STM8 software libraries and firmware examples
-
Applications: Ideal for IoT devices, smart gadgets, educational projects, and embedded system prototyping
Texas Instruments LAUNCHXL2-570LC43 Hercules TMS570LC43x LaunchPad Development Kit
- USB powered and capability for external 5v supply
- On board USB XDS_ICDIc2 JTAG debug
- IEEE 1588 precision time Ethernet PHY DP83630
- On board SCI to PC serial communication
- User programmable push buttons
- Reset switches
- LEDs and Analog input
NUCLEO-G491RE Development Board, STM32 Nucleo-64, STM32G491RE MCU, Arduino Uno & ST Morpho Connectivity
- Product: NUCLEO-G491RE Development Board
- Core Architecture: ARM
- Core Sub-Architecture: Cortex-M4
- Silicon Family Name: STM32
- Silicon Core Number: STM32G491RET6U
MQ-5 liquefied gas Methane Gas Sensor Module
- Model: MQ-5
- Operating Voltage: 5V DC
- Operating Temparature:-20~40 degree celcius
5V 3A Adapter Charger EU Plug
- Input Voltage (V): 100 ~ 270 VAC @50 ~ 60Hz.
- Input current (mA): 100.
- Output Power: 5V 3A.
- Load regulation (%): ±5.
- Input Plug: 2-Pin EU type.
- Output Plug: DC Jack 5.5mm.
AM312 Mini Infrared Human Motion Sensor
- Operating voltage: DC 2.7-12V;
- Static power consumption: <0.1mA;
- Delay time: 2 seconds;
- Block time: 2 seconds;
- Trigger mode: repeatable;
- Sensing range: ≤ 100 degrees cone angle, 3-5 meters; (according to the specific lens)
- Working temperature: -20 – + 60 ℃
- Module lens: a small lens
NEO-6M GPS Module with EEPROM for Aero Quad with Antenna for Flight Control GY-NEO6MV2 （with Battery）
- 5Hz position update rate
- Operating temperature range: -40 TO 85°CUART TTL socket
- EEPROM to save configuration settings
- Rechargeable battery for Backup
- The cold start time of 38 s and Hot start time of 1 s
- Supply voltage: 3.3 V
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600)
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
- Separated 18X18mm GPS antenna
Official 7Semi INA219 3-Channel DC Current Sensor Breakout – 26V 3.2A Max
-
3-Channel DC Current, Voltage & Power Monitoring
-
Based on TI INA219 Sensor IC
-
High-Side Current Sensing Design
-
Bus Voltage Measurement up to 26V
-
I2C Interface for Easy Integration
-
Programmable Gain & Conversion Time
-
Internal Power & Current Calculation
-
Low Power Consumption
-
Compact Breakout Board
-
Ideal for Battery, Motor, IoT & Power Systems
Official 7Semi PT100 RTD 3-Wire Temperature Sensor Amplifier Breakout Board – MAX31865
-
Official 7Semi MAX31865 RTD amplifier breakout board
-
Supports PT100 and PT1000 temperature sensors
-
Optimized for 3-wire RTD configuration
-
Compatible with 2-wire and 4-wire RTD sensors
-
High-accuracy RTD-to-digital conversion
-
SPI interface for easy microcontroller integration
-
Built-in fault detection for open and short circuits
-
Compact and reliable design for industrial use
NUCLEO-G070RB Development Board, STM32 Nucleo-64, STM32G070RB MCU, Arduino Uno & ST-Link Debugger
- STM32 microcontroller in LQFP64 package
- External SMPS to generate Vcore logic supply (only available on ‘-P’ suffixed boards)
- 1 user LED shared with Arduino™
- 1 user and 1 reset push-buttons
TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino
- 4-digit 7-segment LED display showing numbers (0-9) and some letters (A, B, C, etc.).
- Managed by TM1637 driver chip for simplified interfacing.
- Uses I2C protocol with only two wires (SDA and SCL) to connect to the microcontroller.
- Compact design with 0.36-inch digit height per segment.
1.3 Inch SPI 6-Pin OLED Display Module (BLUE)
- Size: 1.3 inch
- Resolution: 128 x 64
- Controlling Driver Chip: SSH1106
- Display Area: 21.74 x 10.86mm
- Driving Voltage: 3.3-5V
- Operating Temperature: -40~70 Celsius
- Interface Type: SPI
- Light Color: BLUE
- Number of pins: 6
Official 7Semi SC18IM704 UART to I2C Bus Bridge Breakout
-
Official 7Semi SC18IM704 UART to I2C Bus Bridge Breakout
-
Enables seamless UART to I2C protocol conversion
-
Supports UART baud rates up to 460.8 kbps
-
256-byte FIFO buffer for reliable data transfer
-
ASCII-based command interface for easy control
-
User-configurable GPIO pins for added flexibility
-
Ideal for embedded systems and industrial applications
