NUCLEO-L053R8 Development Board, STM32 Nucleo-64, STM32L053R8 MCU, Arduino Uno & ST Morpho Connectivity
- Product: STMICROELECTRONICS NUCLEO-L053R8 Development Board
- STM32 microcontroller
- 1 user LED shared with ARDUINO®
- 1 user and 1 reset push-buttons
- 32.768KHz crystal oscillator
ACEBOTT Handle Expansion Pack for QD001-QD010
- Wireless Bluetooth control optimized for QD001 smart robot car
- Dual 360° joysticks with responsive buttons
- Bright LED indicators for connection and battery status
- Compatible with ESP32 and ACECode programming environments
- Ergonomic design for comfortable grip during extended use
- Rechargeable battery with long-lasting runtime
NUCLEO-WL33CC1 STM32WL33CC MCU (868/915MHz) Nucleo-64 Development Board
- Front end optimized for 826‑958 MHz high band at 16 dBm
- Ultra low power MCU
- Low power autonomous wake-up receiver
- Delivered with SMA antenna
- Three user LEDs
- Three user and one reset push-buttons
- Board connectors are USB Type C and ARDUINO Uno V3 expansion connector and ST morpho extension pin headers for full access to all MCU I/Os
- Flexible power supply options via ST LINK USB VBUS or external sources
- Dedicated software tool to control and test radio transceiver
Texas Instruments LAUNCHXL2-TMS57012 Hercules TMS570LS12x LaunchPad Development Kit
-
Low-cost LaunchPad™ development kit from Texas Instruments
-
Based on TMS570LS1224 safety-certified MCU
-
ARM® Cortex-R4F lockstep core architecture
-
IEC 61508 SIL 3 and ISO 26262 ASIL D certified
-
Designed for safety-critical applications
-
Integrated safety diagnostics and peripherals
-
On-board emulator for programming and debugging
-
Built-in LEDs, push buttons, and ambient light sensor
-
Supports BoosterPack™ expansion modules
-
Ideal for evaluation, learning, and prototyping
Easy-Plug ACEBOTT ESP32 Smart Home Starter Kit Wooden House IoT Wifi APP (Luxury Version) with Story based Tutorial – QE001
- Model: QE001
- Controller: ESP32
- Connectivity: Wi-Fi, Bluetooth
- Programming Languages: Arduino, ACECode
GY-31 TCS230 TCS3200 Color Sensor
- Model-nGY-31 TCS3200 TCS230
- Operating Voltage- 2.7 ~ 5.5 VDC
- Operating Current (mA)- 25mA @ 5V when LED is ON
- Operating Temperature- -45°C ~ 85°C
- Non-linearity Error- 0.2% at 50KHz typically
- Temperature Coefficient- 200 ppm/°C
ACEBOTT ESP32 Programmable Robot Arm Kit for Arduino – QD022
- Brand ACEBOTT
- Model QD022 (Inventor Series)
- Controller Board ESP32 (Wi-Fi & Bluetooth enabled)
- Degrees of Freedom 4-DOF (4x Servo Motors)
- Control System 3-Axis Control
- Control Interfaces On-board Joysticks, Web Control, Mobile App
- Frame Material Precision-Cut Acrylic
- Power Supply Requires 2x 18650 Lithium-ion batteries (typically sold separately)
- Educational Focus STEAM (Science, Technology, Engineering, Arts, Math)
NUCLEO-WB07CC STM32WB07CCV6 RF MCU Nucleo-64 Development Board
- Brand – STMicroelectronics
- Core – ARM Cortex-M0+
- Data Bus Width – 32 bit
- Manufacturer – STMicroelectronics
- Product – Development Boards
- Product Type – Development Boards & Kits – ARM
- Tool Is For Evaluation Of – STM32WB07CCV6
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
- Operating Supply Voltage- 5V
- Digital I/O- 54
- Analog I/O- 16
- Memory Size- 256kb
- Data RAM Type/Size- 8Kb
- Data ROM Type/Size- 4Kb
- Interface Type- serial\OTA
- antenna Buil-in\external antenna
- Wifi Wi-Fi 802.11 b/g/- 2.4 GHz
- USB Micro USB
- Clock Frequency- 16MHz
DIY Firefly Photosensitive Robot in Paper Box (without battery)
Easy setup
Affordable cost
Good quality
All accessories in 1 box
125PCS 5 Colors 3mm 5mm Round Bright Light LED Assortment Kit
- Easy to use
- Good quality product
- Color of LEDs: Red, Yellow, Green, White, Blue
- This LED Assortment Kit from Orange has a wide scope of applications like school science experiments and DIY light projects, indoor and outdoor light decorations, and electronic or electrical use.
- Shape: Round
NUCLEO-F446ZE – STMicroelectronics Development Board, STM32F446ZE MCU, On-Board Debugger, Arduino, ST Zio and Morpho Compatible
- Model: STMicroelectronics Development Board, STM32F446ZE MCU (NUCLEO-F446ZE)
- Voltage: 3.3 V and 7 – 12 V
- USB OTG or full-speed device with Micro-AB connector (depending on STM32 support)
- Crystal oscillator: 32.768 KHz
Texas Instruments LAUNCHXL-F28P65X C2000 Real-Time MCU F28P65x LaunchPad Development Kit
- On-board XDS110 debug probe for real-time debug and flash programming
- 80-pin LaunchPad leveraging the BoosterPack ecosystem
- Power domain isolation for real-time debug and flash programming
- On-board CAN transceiver and connector
- EtherCAT PHYs and RJ45 connectors
- Two encoder interface (eQEP) connectors
DIY Mini Cat Tracking Robot in Paper Box (without battery)
Operating Voltage: 3V
Easy to install
Comes with a Stepwise User manual
MAX7219 8×8 LED Dot Matrix Module with cable (Red)
- Driver Chip: MAX7219
- Input Voltage: 4-5.5V
- Input Current 330mA
- Requires only 3 communication wires of MCU
- A single module can drive an 8 * 8 common cathode LED
- Connecting wires included
- Easy to interface with variety of MCU platforms
- SPI based control
Official 7Semi ST-LINK V2/V2.1 USB-C Debugger Programmer for STM32 MCUs
- Supports 1.65 V to 5.5 V on the SWIM interface and 1.65 V to 3.6 V on the JTAG/SWD interface.
- USB 2.0 full-speed compatible interface for seamless connection with modern computers.
- SWIM cable supports both ERNI connectors and pin headers.
- 5V power supplied via a USB connector.
- Supports JTAG/SWD and SWV (Serial Wire Viewer) communication.
- Operating temperature: 0C to 50C.
- 1000 Vrms high isolation voltage for ST-LINK/V2-ISOL variant
KY-003 Hall Magnetic Sensor Module
- Model: KY-003
- Working voltage: DC 5V
- Small size, high sensitivity, fast response speed, good temperature performance, high accuracy and high reliability
- Automobile ignite, Brake circuit, Detection and control of position and speed
Texas Instruments MSP-EXP430FR5969 MSP430FR5969 LaunchPad Development Kit
- 64KB FRAM / 2KB SRAM
- 16-Bit RISC Architecture up to 8-MHz FRAM access/ 16MHz system clock speed
- 20 pin LaunchPad standard leveraging the BoosterPack ecosystem
- 0.1F SuperCap for standalone power
- Onboard eZ-FET emulation
- 2 buttons and 2 LEDs for User Interaction
RTC DS1307 24C32 Real Time Clock Module without CR2032 Battery
- Two-wire I2C interface.
- Hour: Minutes: Seconds AM/PM.
- Day Month, Date – Year.
- DS1307 based RTC (Battery include).
- 1Hz output pin.
- Available in 8-pin DIP or SOIC
LED Scroller Matrix keyboard
- Switch Type: Momentary
- Pin Spacing (mm): 2.54
- Module Dimensions (L x W x H): 57 x 33 x 6
- Weight: 10gm
- 4×4 Matrix Keyboard Module with 16 buttons
