GPS NEO-6M Satellite Positioning Module Development Board for Arduino STM32 51(with Battery)
- Product: GPS NEO-6M Satellite Positioning Module Development Board for Arduino STM32 51
- 5Hz position update rate
- Operating temperature range: -40 TO 85°CUART TTL socket
- EEPROM to save configuration settings
- Rechargeable battery for Backup
HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module
- Bluetooth Protocol: Bluetooth Specification V4.0 BLE
- Operating Frequency: 2.4GHz ISM band
- Modulation Mode: GFSK (Gaussian Frequency Shift Keying)
- Transmitting Power: ≤4dBm
- Sensitivity: ≤-84dBm at 0.1% BER
- It’s easy to use and completely encapsulated.
- You can set it as slave or master.
- You can use AT command set the baud rate.
GY-51 LSM303DLH module 3-axis magnetic field acceleration
- Model: GY-51 LSM303DLH
- 12 Bit A/D Converter
- 3-5VDC Power Supply
- I2C Communication Interface
- 16 Bit Data Output
1.3 Inch I2C/IIC 4-Pin OLED Display Module (BLUE)
- Size: 1.3 inch
- Resolution: 128 x 64
- Controlling Chip: SSH1106
- Display Area: 21.74 x 10.86mm
- Driving Voltage: 3.3-5V
- Operating Temperature: -40~70 Celsius
- Interface Type: IIC
- Light Color: Blue
Official 7Semi PT100 RTD 3-Wire Temperature Sensor Amplifier Breakout Board – MAX31865
-
Official 7Semi MAX31865 RTD amplifier breakout board
-
Supports PT100 and PT1000 temperature sensors
-
Optimized for 3-wire RTD configuration
-
Compatible with 2-wire and 4-wire RTD sensors
-
High-accuracy RTD-to-digital conversion
-
SPI interface for easy microcontroller integration
-
Built-in fault detection for open and short circuits
-
Compact and reliable design for industrial use
GY-31 TCS230 TCS3200 Color Sensor
- Model-nGY-31 TCS3200 TCS230
- Operating Voltage- 2.7 ~ 5.5 VDC
- Operating Current (mA)- 25mA @ 5V when LED is ON
- Operating Temperature- -45°C ~ 85°C
- Non-linearity Error- 0.2% at 50KHz typically
- Temperature Coefficient- 200 ppm/°C
Official 7Semi ESP32 & ESP8266 Programmer USB-C, USB to UART Converter
-
Operating voltage 5V
-
Operating current 500mA
-
Communication and interface USB and UART
-
Dimensions 12.20 × 3.45 mm
-
Weight 3 gram
-
Operating temperature −40 to +85 °C
1.3 Inch SPI 6-Pin OLED Display Module (WHITE)
- Size: 1.3 inch
- Resolution: 128 x 64
- Controlling Driver Chip: SSH1106
- Display Area: 21.74 x 10.86mm
- Driving Voltage: 3.3-5V
- Operating Temperature: -40~70 Celsius
- Interface Type: SPI
- Light Color: WHITE
- Number of pins: 6
1.3 Inch SPI 6-Pin OLED Display Module (BLUE)
- Size: 1.3 inch
- Resolution: 128 x 64
- Controlling Driver Chip: SSH1106
- Display Area: 21.74 x 10.86mm
- Driving Voltage: 3.3-5V
- Operating Temperature: -40~70 Celsius
- Interface Type: SPI
- Light Color: BLUE
- Number of pins: 6
360 Degree Trajectory Ball Module Hall Effect Sensor
- Operating Voltage: 2.5-5.25 V
- Operating Temperature:20~70 °C
- Material: Plastic.
- Application: Electronic Circuits.
- Dimensions: 28 x 22 x 8 (LxWxH) mm
- Weight: 2 gm
SPI to Ethernet Hardware TCP/IP W5500 Ethernet Network Module
- Supports 8 independent sockets simultaneously.
- Internal 32Kbytes Memory for Tx/Rx Buffers.
- Power off mode: support.
- Network wake: support.
- Factory and Building Automation
- Medical Monitoring Equipment
1.14″ 135×240 RGB TFT LCD Module 8pin with ST7789 Chip
- 1.14-inch Screen Size
- 135×240 Resolution
- ST7789 Controller
- Color Display Screen
- Display Area: 14.864*24.912mm
- Size: 28*31.4mm
Nano V3.0 Atmega328P-AU FT232 Development Board(Mini USB)
- Using Atmel Atmega328P-AU MCU
- Support USB download and Power
- Support for external 5V ~ 12V DC power supply
- Support ISP download
- Small mini-B USB for programming and serial monitor.
JSN-SR04T Integrative Waterproof Distance Measuring Ultrasonic Sensor Module
- Operating voltage: DC3.0-5.5V
- Static current: >8mA
- Operating current: 30mA
- Operating range: 20cm ~ 6m
- Resolution: 1mm
375PCS 5 Colors 3mm 5mm Round Bright Light LED Assortment Kit
- Easy to use
- Good quality product
- Color of LEDs: Red, Yellow, Green, White, Blue
- This LED Assortment Kit from Orange has a wide scope of applications like school science experiments and DIY light projects, indoor and outdoor light decorations, and electronic or electrical use.
- Shape: Round
High Quality Full Amperes 12V 3A EU Plug Adapter
- This is a durable product with a 6-month warranty.
- The adapter is easy to use.
- It comes with a long wire.
- Wide input voltage range (100VAC-270VAC).
- Very low no-load power consumption.
LCD1604 Blue Backlight Display – 16×04 LCD Display Module
- HD44780 compatible Driver IC
- Input Voltage: 5V
- Resolution: 16×4 characters
- Backlight Color: Blue
- Pixel Color: White
1.8 Inch TFT LCD Module 128×160 with 4 IO
- Display Size: 1.8″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 160
- Interface Type: SPI
- With SD card slot, it is convenient to expand functions
ESP32 ESP-WROOM-32 Development Board(CH340+Type-C+38PIN)
-
Based on ESP32-WROOM-32 WiFi + Bluetooth module
-
38 GPIO pins for multiple I/O interfaces
-
USB Type-C interface for faster and reliable connection
-
CH340 USB to serial converter for easy programming
-
Dual-core 32-bit LX6 microprocessor
-
Supports Arduino IDE, Micropython, and more
-
Built-in WiFi and Bluetooth (BLE) for wireless communication
-
Ideal for IoT, automation, and embedded projects
1.8 Inch ST7735 TFT LCD Module with 4 IO 128*160 (BLUE)
The Blue 1.8-inch ST7735 TFT LCD Module offers a small, colorful, and bright display for various projects. Here are its features and specifications:
- Display Size: 1.8″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 160
- Interface Type: 4-wire SPI interface
- Expandable Storage: Includes an SD card slot for easy data storage
- Arduino Compatible: Compatible with the QD-UTFT library for Arduino
