Home » Shop

Showing 1–20 of 684 resultsSorted by popularity

XL6009 DC-DC Step-Up Converter (DC-DC Boost Power Supply Module)

SKU: POW0023
Original price was: ₹199.00.Current price is: ₹55.00. (Excl. 18% GST)
  • Wide input voltage 3V ~ 32V, optimum operating voltage range is 5 ~ 32V;
  • Wide Output voltage 5V ~ 35V;
  • Built-4A efficient MOSFET switches enable efficiency up to 94%; (LM2577 current is 3A)
  • High switching frequency 400KHz, can use a small-capacity filter capacitors that can achieve very good results, the ripple smaller and smaller. (LM2577 frequency only 50KHz)
Purchase & earn 1 point!Add to cart

Infrared Inspection Module Obstacle Avoidance

SKU: SEN0085
(2)
Original price was: ₹99.00.Current price is: ₹25.00. (Excl. 18% GST)
  • There is an obstacle, the green indicator light on the circuit board
  • Detection distance: 2 ~ 30cm
  • Detection angle: 35 °
  • Comparator chip: LM393
  • 3mm screw holes for easy mounting
Add to cart

3.3V Adapter Board for 24L01 Wireless Module

SKU: COM0026
Original price was: ₹47.31.Current price is: ₹32.00. (Excl. 18% GST)
  1. It can be used with NRF24L01 wireless module
  2. Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
  3. Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
  4. Allows for easy connection to nRF24L01+ modules
  5. Small power on SMD LED indicator
Add to cart

LM2596S DC-DC Buck Converter Step Down Module – Variable Voltage (3A BUCK 3-40V TO 1.5-35V)

SKU: POW0022
Original price was: ₹199.00.Current price is: ₹39.00. (Excl. 18% GST)
  • Input Voltage(VDC): 4 ~ 40.
  • Output Voltage(VDC): 1.3 ~ 37.
  • Output Current: 2A Rated, ( 3A maximum with heat sink).
  • Switching Frequency: 150 kHz.
  • Input reverse polarity protection.
  • Built-in output short protection function.
Add to cart

XL4015 5A Constant Current / Voltage LED Drives Lithium Battery Charging Module

SKU: POW0021
Original price was: ₹199.00.Current price is: ₹99.00. (Excl. 18% GST)
  • High-efficiency DC-DC buck (step-down) power supply based on XL4015 chip

  • Supports 0–5A adjustable output current with constant current (CC) and constant voltage (CV) modes

  • Operates at 300 KHz fixed frequency PWM for stable performance

  • Low ripple (<50mV) ensures clean and reliable output

  • Can be used as a lithium battery charger (Li-ion, LiPo) with CC/CV charging function

  • Suitable as an LED driver, step-down regulator, or battery charging module

  • Adjustable output voltage & current for flexible applications

Purchase & earn 1 point!Add to cart

Official LAUNCHXL-F28379D – C2000 Delfino MCUs F28379D LaunchPad Development Kit

SKU: DEV0111
(2)
Original price was: ₹11,999.00.Current price is: ₹5,449.00. (Excl. 18% GST)
  • Low-cost development kit for TMS320F2837xD, F2837xS, and F2807x microcontrollers

  • Part of TI’s C2000™ MCU LaunchPad™ ecosystem

  • Supports connection of two BoosterPack™ plug-in modules

  • Features powerful dual-core ARM Cortex-M4F architecture

  • Integrated on-board USB JTAG emulator for programming and debugging

  • Ideal for real-time control, motor control, industrial automation, and power electronics

  • Enables rapid prototyping with standardized headers and expansion options

  • Compatible with Code Composer Studio and other TI tools

Purchase & earn 54 points!Add to cart

PLATO 170 Wire Cutter – Special Cutters Electronic Diagonal Cutting Plier

SKU: TOO0002
Original price was: ₹165.00.Current price is: ₹90.00. (Excl. 18% GST)
  • Ultra-High Hardness
  • Flush Wire Cutters has an 13mm long chrome vanadium steel jaw with angled head design. They are ideally sized for working in small spaces and improving your productivity.
  • Super-Sharp Blade
  • Flush Wire Cutters are very sharp, induction hardened cutting edges without bevel for flush cutting. They offer extremely smooth movement for minimum operator fatigue.
Purchase & earn 1 point!Read more

25*25*8mm 28db High Gain 5cm Length Built- in Ceramic Active GPS Antenna for NEO-6M NEO-7MNEO-8M

SKU: SEN0197
Original price was: ₹199.00.Current price is: ₹89.00. (Excl. 18% GST)
  1. Product: ceramic antenna cable
  2. Frequency: 1575.42MHz ± 4 MHz
  3. Antenna gain: 28dB
  4. Operating temperature: -45 ~ +85
  5. Polarization: right-hand circular polarization
  6. Interference suppression: 30dB ± 100MHz
  7. Weight: 15g
Purchase & earn 1 point!Add to cart

Plastic Container Box (Keeper Box)

SKU: BOX0001
Price range: ₹10.00 through ₹130.00 (Excl. 18% GST)
Earn up to 1 point.Select options This product has multiple variants. The options may be chosen on the product page

STM32F103C8T6 System Board (Blue Pill) STM32 ARM Core Board (Original)

SKU: DEV0037
Original price was: ₹324.00.Current price is: ₹180.00. (Excl. 18% GST)
  1. 100% Brand new and high quality STM32 Board
  2. Model: STM32F103C8T6.
  3. Core: ARM 32 Cortex-M3 CPU.
  4. Debug mode: SWD.
  5. 72MHz work frequency.
  6. 64K flash memory, 20K SRAM.
  7. 2.0-3.6V power, I/O.
Purchase & earn 2 points!Add to cart

TP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Type C

SKU: POW0019
Original price was: ₹28.00.Current price is: ₹13.56. (Excl. 18% GST)
  1. Input interface: Type C.
  2. Current: 1A adjustable.
  3. Charge precision: 1.5%.
  4. Input voltage: 4.5V-5.2V.
  5. Full charge voltage: 4.2V.
  6. Battery over-current protection: 3 A
  7. The battery Undervoltage protection: 2.5 V
Add to cart

KY-025 Dry Reed Pipe Module

SKU: SEN0016
Original price was: ₹159.00.Current price is: ₹50.00. (Excl. 18% GST)
  1. working voltage 3.3V-5V
  2. output format: digital switching output (0 and 1)
  3. PCB size: 3.2cm x 1.4c
  4. using a wide voltage LM393 comparator
  5. clean, good waveform driving ability ,more than 15mA.
  6. a fixed bolt holes for easy installation
Purchase & earn 1 point!Add to cart

12864B Graphic Blue Color Backlight LCD Display Module

SKU: DIS0053
Original price was: ₹948.00.Current price is: ₹450.00. (Excl. 18% GST)
  1. Based on ST7920
  2. Resolution: 128 X 64 pixels
  3. Operating voltage: 5V
  4. Viewing Area: 72mm x 40mm
  5. Display mode TN/STN
  6. Backlight Color: Blue
  7. Pixel Color: White
Purchase & earn 5 points!Read more

ESP8266 ESP-01S 5V WiFi Relay Module

SKU: DEV0036
Original price was: ₹483.00.Current price is: ₹207.00. (Excl. 18% GST)
  1. Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
  2. Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
  3. Transmission Distance : 400m (max)
  4. Relay : 5V,10A/250V AC 10A/30V DC
  5. Baud Rate: 9600.
  6. Diode effusion protection;
  7. Short response time
Purchase & earn 2 points!Add to cart

PL2303 PL2303HX USB To TTL(Serial) Converter Module (5 Pin)

SKU: COM0034
Original price was: ₹99.60.Current price is: ₹62.00. (Excl. 18% GST)
  1. 500mA self-recovery fuse for protection
  2. Two data transmission indicator can monitor data transfer status in real time
  3. Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power
  4. Electrostatic package ensures the board will not be damaged before use
Purchase & earn 1 point!Read more

KY-011 5mm Two Color LED Module

SKU: COMP0013
Original price was: ₹42.33.Current price is: ₹25.00. (Excl. 18% GST)
  • Diameter: 5mm
  • Package Type: Diffusion
  • Color: Red + Green
  • Luminosity Intensity (MCD)
Add to cart

ECG Electrode

SKU: SEN0161
Original price was: ₹27.39.Current price is: ₹14.00. (Excl. 18% GST)

 

  1. Different base materials, sizes, and connections
  2. Monitoring electrode with foam tape and radiolucent stud.
  3. ECG Electrode with convenient abrader.
  4. ECG Electrode for monitoring applications requiring high adhesion.
  5. Adhesive foam tape backing and proprietary sticky gel ensure excellent skin contact.
  6. Remains fresh for 30 days out of the bag.

Female to Female Jumper Wires 40 Pin Dupont Jumper Wire 20CM

SKU: CAB0009
Original price was: ₹62.25.Current price is: ₹39.00. (Excl. 18% GST)
  1. High quality and in good working condition
  2. Durable and reusable
  3. Easy to install and use
  4. A popular choice for construction or repair
  5. Be used for the electronic project and Genuine Arduino product
  6. Flexible Breadboard Jumper Cable Wire allows you to plug and unplug easily for prototyping.
Add to cart

ESP32 ESP-WROOM-32 Development Board(CH340+Type-C+38PIN)

SKU: DEV0018
Original price was: ₹632.00.Current price is: ₹350.00. (Excl. 18% GST)
  • Based on ESP32-WROOM-32 WiFi + Bluetooth module

  • 38 GPIO pins for multiple I/O interfaces

  • USB Type-C interface for faster and reliable connection

  • CH340 USB to serial converter for easy programming

  • Dual-core 32-bit LX6 microprocessor

  • Supports Arduino IDE, Micropython, and more

  • Built-in WiFi and Bluetooth (BLE) for wireless communication

  • Ideal for IoT, automation, and embedded projects

Purchase & earn 4 points!Read more

50CM SMA Female to U.FL/IPX Interface Cable

SKU: SEN0197-1
Original price was: ₹149.00.Current price is: ₹66.95. (Excl. 18% GST)
  • 20 inches/ 50cm lengths of M.2(NGFF) U.FL to RP-SMA antenna connector adapter cable. Extra thick (1.11mm) coaxial pigtail Cable.
  • Note: be used for M.2 (NGFF) Interface. Cannot be used for MINI PCI-E interface
Purchase & earn 1 point!Add to cart