1.8 Inch TFT LCD Module 128×160 with 4 IO
Original price was: ₹442.00.₹350.00Current price is: ₹350.00. (Excl. 18% GST)
Price (Excl. GST): ₹350.00
Price (Incl. GST): ₹413.00
- Display Size: 1.8″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 160
- Interface Type: SPI
- With SD card slot, it is convenient to expand functions
| Weight | 25 g |
|---|
Out of stock
This product is currently sold out.
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product. Product Images are shown for illustrative purposes only and may differ from the actual product.
The 1.8 Inch TFT LCD Module display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available! The 1.8 display has 128160 colour pixels. Unlike the low cost Nokia 6110 and similar LCD displays, which are CSTN type and thus have poor colour and slow refresh, this display is a true TFT! The TFT driver (ST7735R) can display full 18-bit colour (262,144 shades!). And the LCD will always come with the same driver chip so there are no worries that your code will not work from one to the other.
The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as an ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full-colour bitmaps from a FAT16/FAT32 formatted microSD card.
Product Specification
|
NAME |
PARAMETER |
|
Display colors |
16BIT RGB 65K Color |
|
SKU |
DIS0005 |
|
size |
1.8(inch) |
|
type |
TFT |
| Driver chips |
ST7735S |
| resolution |
128*160 (Pixel) |
| Module interfaces |
4-wire SPI interface |
| Backlight |
2 White Led |
| Valid display area |
28.03×35.04 (mm) |
| Module PCB size |
38.30×62.48 (mm) |
| Operating temperature |
-10℃~60℃ |
| Storage temperature |
-20℃~70℃ |
| Operating voltage |
5V/3.3V |
| power consumption |
Approximately 90MW |
| Product weight |
Approximately 25 (g) |
Pin Configuration
|
S.No |
Pin designator |
Description |
|
1 |
VCC | VCC(3.3V~5V) |
|
2 |
GND |
LCD screen power ground |
| 3 | GND |
LCD screen power ground |
|
4 |
NC |
Undefined, reserved |
| 5 | NC |
Undefined, reserved |
| 6 | NC |
Undefined, reserved |
|
7 |
CLK |
LCD SPI bus clock signal |
| 8 | SDA |
The LCD SPI bus writes data signals |
|
9 |
RS |
LCD Register/Data Select Signal, Low: Register, High: Data |
| 10 | RST |
LCD screen reset signal, low level reset |
|
11 |
CS |
The LCD screen selects the signal and enables it at low level |
Package includes
1 x 1.8 Inch TFT LCD Module 128 x 160 with 4 IO
Leave a Reply