Official NUCLEO-8L152R8 Development Board, STM32 Nucleo-64, STM8L152R8 MCU Eval Board, On Board Debugger, Arduino Nano Extension, Reset Push Button
-
Microcontroller: STM8L152R8 MCU in LQFP64 package
-
Development Board Type: STM8 Nucleo-64
-
Connectivity: Arduino™ Uno V3 compatible and ST morpho headers
-
Power Efficiency: Low-power STM8 microcontroller suitable for energy-sensitive applications
-
Prototyping: Affordable and flexible platform for rapid development and experimentation
-
Expansion: Supports a wide range of shields, sensors, and modules for added functionality
-
Ease of Use: Open development platform with access to STM8 software libraries and firmware examples
-
Applications: Ideal for IoT devices, smart gadgets, educational projects, and embedded system prototyping
Official Nordic Semiconductor NRF5340-DK Development Kit nRF5340 Bluetooth Low Energy/SoC
-
Official Nordic Semiconductor Development Kit for the nRF5340 dual-core ARM® Cortex®-M33 SoC.
-
Supports Bluetooth Low Energy with 2 Mbps, Advertising Extensions, and Long Range.
-
Concurrent Bluetooth LE, Bluetooth Mesh, Thread, and Zigbee operation.
-
Additional protocol support: NFC, ANT, 802.15.4, and 2.4 GHz proprietary.
-
Bundled NFC antenna for quick NFC-A tag testing.
-
Integrated SEGGER J-Link debugger for on-board and external target programming/debugging.
-
Arduino Uno Rev3 compatible headers for expansion with shields.
-
Multiple GPIOs, buttons, and LEDs for hardware prototyping.
-
Fully supported by the nRF Connect SDK for fast software development.
-
Ideal for IoT, smart home, wearables, and industrial applications.
Official Nordic Semiconductor NRF52840-DONGLE – USB Dongle based on nRF52840
-
Compact USB Dongle powered by the Nordic Semiconductor nRF52840 SoC
-
Supports Bluetooth 5, Bluetooth mesh, Thread, ZigBee, 802.15.4, ANT, and 2.4 GHz proprietary protocols
-
Ideal for use with nRF Connect for Desktop for wireless development and testing
-
Low-cost hardware solution for prototyping short-range wireless applications
-
User-programmable RGB LED, green status LED, and button for custom applications
-
15 GPIO accessible via castellated solder points along the edge
-
Automatically programmed by supported nRF Connect for Desktop apps
-
Compatible with nRF5 SDK (board name: PCA10059) for example projects
-
Easy USB connectivity – no additional power source required
-
No onboard debug support; designed for programming and USB communication only
Official Nordic Semiconductor NRF52833-DK – nRF52833 Bluetooth 5.1 mesh NFC Thread Zigbee 802.15.4/2.4 GHz Dev Kit
-
Multi-protocol support: Bluetooth 5.1, Bluetooth Mesh, Thread, Zigbee, 802.15.4, and 2.4 GHz proprietary.
-
Powered by nRF52833 SoC: ARM® Cortex®-M4 CPU with FPU, 512 KB Flash, and 128 KB RAM.
-
Arduino Uno Rev3 compatible: Works with a wide range of third-party shields.
-
Full I/O access: 42 GPIOs and interfaces via connectors.
-
Integrated PCB trace antenna and RF connector for direct RF testing.
-
External NFC antenna (included) for NFC-A tag functionality.
-
Supports Power Profiler Kit for precise power measurement.
-
Ideal for IoT, smart home, wearables, and industrial applications
Official Nordic Semiconductor NRF52-DK Development Kit nRF Sniffer Bluetooth Low Energy nRF52810, nRF52832 – Transceiver, ANT, Bluetooth® 5.x (BLE), NFC 2.4GHz Evaluation Board
-
Powerful Multiprotocol SoC – Supports Bluetooth® Low Energy, ANT, and 2.4 GHz proprietary protocols.
-
High-Performance Processor – 32-bit ARM® Cortex®-M4F CPU for efficient computation and signal processing.
-
Ample Memory – 512 kB Flash + 64 kB RAM for complex applications and data storage.
-
On-Air Compatibility – Works seamlessly with Nordic’s nRF51 Series, nRF24L, and nRF24AP products.
-
Ultra-Low Power Design – Optimized for long battery life in portable and IoT devices.
-
Advanced Bluetooth LE Features – High throughput, low latency, and extended range support.
-
ANT Protocol Support – Ideal for sports, fitness, and health monitoring applications.
-
Flexible Peripheral Interfaces – Includes SPI, I²C, UART, GPIOs for easy integration.
-
Compact & Versatile – Suitable for wearables, beacons, smart home, and industrial applications.
Official MSP430FR2476 LaunchPad Development Kit
-
Based on MSP430FR2476 ultra-low-power MCU
-
Features 64KB embedded FRAM and 8KB SRAM
-
Includes on-board debug probe for programming & energy measurement
-
Supports real-time data logging and sensing applications
-
Onboard 2 programmable buttons and 2 LEDs (1 RGB)
-
Integrated analog temperature sensor
-
CR2032 battery holder for standalone applications (battery not included)
-
16 MHz clock speed with flexible memory allocation
-
Compatible with BoosterPack™ plug-in modules
-
Ideal for value-line sensing, portable, and energy-efficient applications
Official MSP-EXP430FR5994 – MSP430FR5994 LaunchPad Development Kit
-
Ultra-low-power LaunchPad™ kit with MSP430FR5994 16-bit MCU
-
Features 256KB FRAM & 8KB SRAM for high-speed, non-volatile storage
-
Includes microSD card holder & super capacitor for standalone apps
-
On-board debugger for easy programming & real-time debugging
-
Supports vector math via Low-Energy Accelerator (LEA)
-
User-programmable buttons and LEDs for interactive testing
-
40-pin BoosterPack™ headers for easy hardware expansion
-
USB interface for PC connectivity and power
-
Ideal for low-power IoT, sensor nodes, and data logging projects
-
Supported by Code Composer Studio™ and Energia IDE
Official MSP-EXP430FR4133 MSP430FR4133 LaunchPad™ series – MCU 16-Bit Embedded Evaluation Board
-
Based on MSP430FR4133 ultra-low-power microcontroller with FRAM memory
-
Includes onboard segmented LCD display for real-time interface
-
Features 10-bit ADC, programmable buttons, and user LED
-
Integrated onboard debugger for programming and energy measurement
-
Out-of-the-box stopwatch and temperature sensing demo included
-
Supports 20-pin BoosterPack™ plug-in modules for expansion
-
Perfect for data logging, embedded sensing, and IoT development
-
Operates efficiently in battery-powered and energy-harvesting applications
Official MSP-EXP430FR2355 – MSP430FR2355 LaunchPad Development Kit
-
Powered by MSP430FR2355 ultra-low-power Value Line MCU
-
Includes 32KB FRAM & 4KB SRAM for flexible memory allocation
-
On-board debug probe for easy programming and energy measurement
-
Features 12-bit ADC, DACs, PGAs & enhanced comparators (eCOMPs)
-
Smart Analog Combo for advanced signal chain prototyping
-
Ambient light sensor & external analog connector included
-
Two user-programmable buttons and two LEDs
-
Ideal for data logging, sensor applications, and low-power systems
-
24MHz operation for faster processing in energy-constrained applications
-
Compatible with TI’s Code Composer Studio™ and IAR Embedded Workbench
Official MSP-EXP430FR2311 – MSP430FR2311 LaunchPad Development Kit
-
Easy-to-use development board for MSP430FR2311, FR2000 & FR21xx MCUs
-
On-board emulator for programming, debugging, and energy measurement
-
Includes on-board user buttons, LEDs, and optical sensor interface
-
Pre-programmed demo for light sensing and op-amp testing
-
Features 4KB FRAM and ultra-low-leakage TIA (50 pA)
-
Integrated op-amp, ADC, and comparator for smart analog applications
-
20-pin BoosterPack™ headers for easy hardware expansion
-
Ideal for low-power, sensor-based and industrial monitoring solutions
Official LP-AM261 AM261x Arm®-based MCU General-Purpose LaunchPad™ Development Kit
-
Official TI LaunchPad™ for AM261x Arm®-based microcontrollers
-
Powered by Arm® Cortex®-R52 for high performance and real-time control
-
Low-cost and general-purpose development platform
-
Supports BoosterPack™ plug-in modules for easy expansion
-
On-board debug interface for faster prototyping
-
Multiple I/O interfaces – UART, SPI, I²C, CAN, GPIO
-
Compatible with TI MCU LaunchPad™ ecosystem
-
Ideal for industrial control, IoT, and automation applications
Official LAUNCHXL-F28P55X C2000™ Real-Time MCU LaunchPad™ Development Kit
-
Official TI C2000™ LaunchPad™ for F28P55x real-time microcontrollers
-
Low-cost and developer-friendly evaluation & prototyping board
-
Extended version with extra pins for enhanced connectivity
-
Supports two BoosterPack™ plug-in modules simultaneously
-
Cross-compatible with the TI MCU LaunchPad™ ecosystem
-
Ideal for motor control, digital power, and industrial automation projects
Official LAUNCHXL-F28027F C2000 Piccolo MCU F28027F LaunchPad™ Development Kit
-
Low-cost evaluation and development board for InstaSPIN-FOC enabled F2802x series MCUs
-
Part of the Texas Instruments LaunchPad™ ecosystem – compact, standardized, and easy-to-use
-
Powered by C2000 Piccolo F28027F MCU for high-performance real-time motor control
-
Supports InstaSPIN-FOC technology for efficient field-oriented motor control without detailed motor parameters
-
Compatible with TI BoosterPacks for quick prototyping and functionality expansion
-
Integrated on-board emulator for programming and debugging
-
Provides GPIO access and standard connectors for external peripherals
-
Backed by MotorWare software tools for simplified development and faster time-to-market
-
Ideal for motor drives, robotics, digital power supplies, renewable energy systems, and embedded control applications
Official EK-TM4C129EXL – ARM Cortex-M4F TM4C129E Connected LaunchPad Evaluation Kit
-
Based on ARM® Cortex-M4F TM4C129ENCPDT MCU
-
Features hardware crypto accelerators for secure data processing
-
Supports 10/100 Ethernet MAC + PHY for fast network connectivity
-
Includes USB 2.0 Host/Device/OTG support
-
Comes with on-board debugger and emulator
-
Integrated motion control PWM and hibernation module
-
Ideal for secure cloud communication using TLS/SSL (WolfSSL support)
-
Out-of-the-box demo connects securely to Exosite cloud
-
Runs on TI-RTOS for real-time embedded applications
-
Expansion via BoosterPack™ headers
-
Perfect for IoT, smart grid, industrial automation, and control systems
Official EK-TM4C1294XL – ARM Cortex-M4F TM4C1294 Connected LaunchPad Evaluation Kit
-
Based on TI TM4C1294NCPDT ARM Cortex-M4F microcontroller
-
120 MHz clock speed for high-performance applications
-
Integrated 10/100 Ethernet MAC + PHY for connected applications
-
Features USB 2.0 OTG, UART, I2C, SPI, and CAN interfaces
-
On-board debug via ICDI (In-Circuit Debug Interface)
-
Includes 2 user buttons and 2 user LEDs
-
BoosterPack-compatible for easy expansion
-
Low-power operation suitable for real-time control systems
-
Ideal for IoT, networking, and embedded system development
-
Supported by TI’s TivaWare™ SDK and Code Composer Studio™
Official CYUSB3KIT-004 Cypress Semiconductor CYUSB301x EZ-USB FX3™ USB 3.0 Host/Controller Interface Evaluation Board
Official CYUSB3KIT-003 Cypress Semiconductor CYUSB301x EZ-USB FX3™ USB 3.0 Host/Controller Interface Evaluation Board
-
USB 3.0 Dev Kit: Enables quick evaluation of SuperSpeed USB functionality.
-
EZ-USB FX3 Controller: Built on the CYUSB301x USB 3.0 peripheral family.
-
ARM9 + 512 KB RAM: Supports flexible, high-performance firmware development.
-
GPIF II Interface: Connects easily to FPGAs, processors, ASICs, and image sensors.
-
Up to 5 Gbps Speed: Ideal for high-bandwidth data applications.
-
Complete Software Support: Includes FX3 SDK, drivers, and examples.
-
Easy Prototyping: Onboard debug and accessible I/O for fast development.
-
Affordable Solution: Cost-effective USB 3.0 integration platform.
Official BME690 Digital Sensor Nano Breakout 2.54mm – Temperature, Humidity, Pressure, Gas | I2C
-
Measures temperature, humidity, pressure, and gas (VOC/VSC)
-
Powered by Bosch Sensortec BME690 sensor
-
Supports Bosch BSEC software for advanced air-quality processing
-
I²C interface for easy microcontroller integration
-
3.3 V operating voltage
-
Low-power design for battery-powered applications
-
Standard 2.54 mm pin pitch for breadboard compatibility
-
Compact and rugged breakout design
-
Ideal for IoT, smart home, HVAC, and air-quality monitoring
Official Arduino UNO Q Single Board Computer ABX00162(2GB RAM 16GB eMMC)
- Processor: Qualcomm Dragonwing QRB2210
- Microcontroller (MCU): STM32U585
- RAM/Storage: 2GB/16GB
- Connectivity: Wi-Fi 5, BT 5.1
- Debian OS : Linux & Zephyr
Official Arduino UNO EK (एक) R4 Minima ABX00080_IN – Made in India
- Official Arduino UNO EK (एक) R4 Minima – Made in India
- Powered by Renesas RA4M1 Arm® Cortex®-M4 32-bit processor @ 48MHz
- 14 digital I/O pins (6 PWM outputs) and 6 analog inputs
- 5V logic compatibility for seamless integration with existing shields and sensors
- USB-C connector for faster programming and communication
- Increased memory and performance for complex projects
- Fully compatible with Arduino IDE and existing UNO shields
- Made in India for local manufacturing and accessibility
