T856-C Power Bank Charging Circuit Module (5V USB Step Up Type C Charging Module)
Original price was: ₹99.00.₹24.58Current price is: ₹24.58. (Excl. 18% GST)- Input voltage: 3.7V~5.5V
- Charging current: up to 1A
- Output current: up to 1A
- Output voltage: 5V
- BAT discharge termination voltage: 2.9V
- Preset 4.2V charging voltage with an accuracy of ±1%
- Discharge efficiency: 85% (input 3.7V, output 5V/1A)
T856-C Power Bank Charging Circuit Module (5V USB Step Up Type C Charging Module)
- Input Voltage: 3. 7V~5. 5V
- Output voltage: 5V, BAT Discharging Stop Voltage: 2. 9V
- Discharging Efficiency: 85%(input 3. 7V output 5V/1A)
- Charging Interface: C-Type USB port
- Under Voltage Protection
KY-002 Vibration Switch Module
- Component Type SW- 18015P
- Maximum Voltage(V)- 12
- Rated Heating Current(mA)- 20
- PCB Size ( L x W ) mm- 20 x 15
- Height (mm)- 18
KY-022 Infrared Receiver Module for Arduino
- Dimension: 2.5 x 1.5 x 1.5 cm.
- Receiving angle: 90 °.
- Working voltage: 2.7 ~ 5.5V.
- Frequency: 37.9KHz
- Receiving range: 18m.
- Weight: 4 gm.
Micro SD Card Module Mini TF Card Read and Write 6pin
- Supply Voltage (V)- 3.3
- Control Interface- GND, VCC, MISO, MOSI, SCK, CS
- Mounting Hole size- M2
- PCB Size (mm)- 18 x 20
- Weight (gm)- 4
Mini USB Cable 0.3m
- Color : Blue
- Length (cm) : 30
- USB Type : Type-A to Type-B
- Weight (gm) : 20
Official 7Semi BSS138 4-Ch I2C Bi-directional Logic Level Converter Breakout
-
4-Channel Bi-Directional Logic Level Converter
-
Supports 1.8V to 10V Logic Levels
-
BSS138 N-Channel MOSFET Based Design
-
Optimized for I2C Communication
-
Supports TTL Serial & Slow SPI (<2MHz)
-
Onboard 10K Pull-Up Resistors
-
Fully Assembled & Pre-Tested PCB
-
6-Pin Headers for Easy Integration
-
Breadboard & Perfboard Friendly
-
Compatible with Arduino, Raspberry Pi & ESP32
Acrylic Fixed Bracket For HC-SR04 Ultrasonic Module
- Acrylic Body.
- Easy to install.
- Note: This package does not include the ultrasonic sensor.
KY-004 Tactile Switch Module
- Operating voltage 3,3 V – 5 V
- Operating temperature -25 °C – 105°C
- Lifetime 100.000 Zyklen
- Dimensions 18 x 15 x 6 mm
KY-034 7 Color Flashing LED Module
- Working voltage: 3.0 -4. 5v
- 5mm round head led.
- light color: pink, yellow, green (highlight)
- Lens type: white mist
KY-003 Hall Magnetic Sensor Module
- Model: KY-003
- Working voltage: DC 5V
- Small size, high sensitivity, fast response speed, good temperature performance, high accuracy and high reliability
- Automobile ignite, Brake circuit, Detection and control of position and speed
Acrylic Bracket For HC-SR501
- Material: Acrylic
- Dimensions: 50 x 40 x 18 (LxWxH) mm.
- Weight: 8 gm
9V Original HW High-Quality Battery
- Constant 9V Output till lasts
- Metal Jacket Body
- Good Built Quality and hence Leakproof
- Easy to install and Replace
- Corrosion free Connector Point for long-term use
- 0% Mercury and Cadmium. Environment-friendly
- OEM Compatible.
4pin 2.54mm Twist Female to Female Dupont Cable
- Female to female
- 4pin (2.54mm) to 4pin (2.54mm) header
- Withstand voltage: 300V DC Min
- Insulation resistance: ≥ 5MΩ Min
- Contact resistance: ≤ 5Ω Max
TP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Mini USB
- Input interface: Mini USB.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.2V.
- Full charge voltage: 4.2V.
- Battery over-current protection: 3 A
- The battery Undervoltage protection: 2.5 V
IIC I2C Logic Level Converter Bi-Directional Module 5V to 3.3V for Arduino
- Number of Channels- 4
- Voltage on Lx Side- 1.8V-5V
- Voltage on Hx Side- 2.8V-6V
- Power- 2.8V 6V
- Length (mm)- 16
- Width (mm-) 13
- Height (mm- 3
- Weight (gm)- 2
3pin 2.54mm Twist Female to Female Dupont Cable
- Color: Red, Black,Yellow
- Connector 1: Female Dupont
- Connector 2: Female Dupont
- Connector 3: Female Dupont
- Insulation Material: PVC
- Length: 20cm
TP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Micro USB
- Input interface: Mini USB.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.2V.
- Full charge voltage: 4.2V.
- Battery over-current protection: 3 A
- The battery Undervoltage protection: 2.5 V
13.56MHz RFID IC Key Tags
- Material : ABS
- Chip Type : FM1108 Fudan
- Response Frequency : 13.56 MHz
- Dimensions (mm) LxWxH : 40.5 mm * 32 mm * 4.2 mm
- Memory Capacity : 8 Kbit
3mm 3528 LDR 10-20K
- Diameter: 3mm
- No. of Pins: 2
- Type of Mounting: PCB Through Hole
- Maximum Operating Temperature: +80°C (Approx.)
- Dark resistance:1-20 Mohm
