GPS NEO-M8N Satellite Positioning Module Development Board for Arduino STM32 51(with Battery)
SKU:
SEN0197-5
Original price was: ₹1,999.00.₹897.46Current price is: ₹897.46. (Excl. 18% GST)
- Model: NEO M8N GPS Module
- Default baud rate: 9600.
- Supply Voltage: 3V to 5V
- Antenna size 25*25mm
- Module size 25mm*35mm
- Mounting aperture 3mm
GPS NEO-7M Satellite Positioning Module Development Board for Arduino STM32 51(with Battery)
SKU:
SEN0197-4
Original price was: ₹699.00.₹457.63Current price is: ₹457.63. (Excl. 18% GST)
- On-board with ceramic antenna,
- Welded with an SMA head
- Reserved serial port interface
- Comes with a signal indicator
GPS NEO-6M Satellite Positioning Module Development Board for Arduino STM32 51(with Battery)
SKU:
SEN0197-3
Original price was: ₹599.00.₹372.03Current price is: ₹372.03. (Excl. 18% GST)
- Product: GPS NEO-6M Satellite Positioning Module Development Board for Arduino STM32 51
- 5Hz position update rate
- Operating temperature range: -40 TO 85°CUART TTL socket
- EEPROM to save configuration settings
- Rechargeable battery for Backup
3M GPS GLONASS GNSS Antenna with SMA Male Connector
SKU:
SEN0197-2
Original price was: ₹399.00.₹211.02Current price is: ₹211.02. (Excl. 18% GST)
- The antenna assembly consists of a patch antenna for receiving GNSS signals and a preamplifier for signal amplification.
- Power supply to the antenna preamplifier must be provided by the application on the same RF signal trace as the GNSS RF signal is carried to the application.
- The antenna has an internal magnet so that it can be fixed on a metallic surface.
- Easy to use an antenna. Does not require RF or antenna knowledge.
50CM SMA Female to U.FL/IPX Interface Cable
SKU:
SEN0197-1
Original price was: ₹149.00.₹66.95Current price is: ₹66.95. (Excl. 18% GST)
- 20 inches/ 50cm lengths of M.2(NGFF) U.FL to RP-SMA antenna connector adapter cable. Extra thick (1.11mm) coaxial pigtail Cable.
- Note: be used for M.2 (NGFF) Interface. Cannot be used for MINI PCI-E interface
25*25*8mm 28db High Gain 5cm Length Built- in Ceramic Active GPS Antenna for NEO-6M NEO-7MNEO-8M
SKU:
SEN0197
Original price was: ₹199.00.₹89.00Current price is: ₹89.00. (Excl. 18% GST)
- Product: ceramic antenna cable
- Frequency: 1575.42MHz ± 4 MHz
- Antenna gain: 28dB
- Operating temperature: -45 ~ +85
- Polarization: right-hand circular polarization
- Interference suppression: 30dB ± 100MHz
- Weight: 15g
GYGPSV1 NEO-M8N GPS Module, subsistute for NEO-6M GY- NEO8MV2 (with Battery）
SKU:
SEN0196
Original price was: ₹1,800.00.₹800.00Current price is: ₹800.00. (Excl. 18% GST)
- Antenna Size : approx. 26 x 26 x 9 (LxWxH) mm.
- Module Size : approx. 26 x 36 x 4 (LxWxH) mm.
- Net weight : approx. 16 gm.
- Gross weight : approx. 17 gm.
- Mounting : approx. 3 mm.
- The default baud rate : 9600.
- Flash memory: 64KB.
NEO-7M GPS Module with EEPROM for C/AeroQuad with Antenna (with Battery）
SKU:
SEN0195
Original price was: ₹1,499.00.₹549.00Current price is: ₹549.00. (Excl. 18% GST)
- GPS modules NEO-7M, 3V-5V power supply
- Antenna Size: 12x12mm
- Module Size: 23x30mm
- Installation Diameter: 3mm
- Supply Voltage: 3V-5V
- The default baud rate: 9600
NEO-6M GPS Module with EEPROM for Aero Quad with Antenna for Flight Control GY-NEO6MV2 （with Battery）
SKU:
SEN0194
Original price was: ₹490.53.₹230.00Current price is: ₹230.00. (Excl. 18% GST)
- 5Hz position update rate
- Operating temperature range: -40 TO 85°CUART TTL socket
- EEPROM to save configuration settings
- Rechargeable battery for Backup
- The cold start time of 38 s and Hot start time of 1 s
- Supply voltage: 3.3 V
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600)
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
- Separated 18X18mm GPS antenna
IR Remote Control without Battery
SKU:
SEN0193
Original price was: ₹98.00.₹49.00Current price is: ₹49.00. (Excl. 18% GST)
- Remote control distance : More than 8 meters
- IR carrier frequency : 38KHz
- Output type : Digital
- Power Supply : CR2050 Battery (Not Included)
- Pointing Angle : up to 60
LED Scroller Matrix keyboard
SKU:
SEN0192
Original price was: ₹250.00.₹142.00Current price is: ₹142.00. (Excl. 18% GST)
- Switch Type: Momentary
- Pin Spacing (mm): 2.54
- Module Dimensions (L x W x H): 57 x 33 x 6
- Weight: 10gm
- 4×4 Matrix Keyboard Module with 16 buttons
4×4 Matrix 16 Keypad Keyboard Module 16 Button MCU
SKU:
SEN0191
Original price was: ₹112.00.₹46.00Current price is: ₹46.00. (Excl. 18% GST)
- 4×4 Matrix Keyboard Module with 16 buttons
- Small in size and hence Save space
- More convenient to use
- Expanded development application modules for single chip
- With 16 keys and 8 pin
2X2 Matrix 4 Button Module
SKU:
SEN0190
Original price was: ₹98.00.₹42.00Current price is: ₹42.00. (Excl. 18% GST)
- 2×2 Matrix Keyboard Module with 4 buttons
- Small in size and hence Save space
- More convenient to use
- Expanded development application modules for single chip
- With 4 keys and 4 pin
1×4 4 Key Matrix Membrane Switch Keypad Keyboard Control Panel SCM Extended Keyboard
SKU:
SEN0189
Original price was: ₹229.00.₹51.80Current price is: ₹51.80. (Excl. 18% GST)
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- Mount Style: Self-Adherence
- Max. Circuit Rating: 35 VDC, 100 mA.
- Contact Bounce : <=5ms
- Life Expectancy : 1 million closures
- Operation Temperature : -20 to +40 °C
4*3 Membrane Switch Matrix Keypad
SKU:
SEN0188
Original price was: ₹125.00.₹46.00Current price is: ₹46.00. (Excl. 18% GST)
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
- Sticker can peel off for adhesive mounting.
- Operating Voltage (V): 12 DC
4*4 Membrane Switch Matrix Keypad
SKU:
SEN0187
Original price was: ₹119.00.₹42.00Current price is: ₹42.00. (Excl. 18% GST)
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector,4x 4type 16 keys.
- Sticker can peel off for adhesive mounting.
- Used widely in industrial and home electronic equipments, instrument, etc.
- This allows a microcontroller to scan the 8 output pins to see which of the 16 buttons is being pressed.
TTP223 Touch Button Module Self-Locking Inching Capacitive Switch
SKU:
SEN0186
Original price was: ₹36.00.₹12.00Current price is: ₹12.00. (Excl. 18% GST)
- Input Voltage : 2 Volt – 5.5 Volts DC.
- The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V.
- Sensitivity can adjust by the capacitance(0~50pF).
- Stable touching detection of the human body for replacing traditional direct switch key.
- Provides direct mode toggle mode by pad option(TOG pin).
- After power-on have about 0.5sec stable-time, during the time do not touch the keypad, and the function is disabled.
- Auto calibration and Re-calibration period is about 4.0 sec when the key has not be touched.
TTP229 16-way Capacitive Touch Switch Module
SKU:
SEN0185
Original price was: ₹164.34.₹100.00Current price is: ₹100.00. (Excl. 18% GST)
- Working voltage: 2.4V to 5.5V
- Built-in regulator
- Two modes
- Simple 8 key mode with independent 8 Channel parallel output.
- Advanced 16 Key modes with I2C interface output.
- Modes can be selected and configured by the user.
- Adjustable sensitivity
TTP226 8-way Capacitive Touch Switch Module
SKU:
SEN0184
Original price was: ₹176.79.₹96.00Current price is: ₹96.00. (Excl. 18% GST)
- Onboard 8 key TTP226 capacitive touch induction IC.
- Onboard 8-way level indicator.
- Working voltage: 2.4 to 5.5 V.
- Modules, you can set the output mode, key output mode, the longest time and fast/low power output
TTP224 4-way Capacitive Touch Switch Module
SKU:
SEN0183
Original price was: ₹119.00.₹55.00Current price is: ₹55.00. (Excl. 18% GST)
- Onboard TTP224 capacitive touch sensor IC 4 keys
- 4 board-level status indicator
- Working voltage: 2.4V-5.5V
- Advanced Pins breakout, so that the output mode and working mode selectable.
- Low power selection
