Core Board STM8S103F3P6 STM8 Development Board Minimum System Board
SKU:
DEV0039
Original price was: ₹256.00.₹93.22Current price is: ₹93.22. (Excl. 18% GST)
- Chipboard STM32F103C8T6
- On board, SWIM interface and reset button
- Micro USB line or the 2.54 pin to link to the power with the input voltage 4.5V-15V.
- Power light and the Demo indicator light
- Leads all the pins and has detailed label for the Pins.
- Support SWIM debug mode.
CO Gas Sensor Detector Carbon Monoxide Poisoning Alarm Detector LCD Photoelectric Independent 85dB Warning High Sensitive 220V 50HZ
SKU:
SEN0050
Original price was: ₹824.00.₹470.00Current price is: ₹470.00. (Excl. 18% GST)
- LCD Displayer (optional): 4 digits LCD displayer.
- Audibility: 85dB ( at 1m distance ), Frequency 3 – 0.5KHZ.
- Standby Current: <50μA.
- Alarm Current: <50mA.
- Standby Mode: Green Led flashes once every 30 seconds.
CJMCU-3221 INA3221 Triple-way Low Side / High Side I2C Output Current Power Monitor Module
SKU:
POW0031
Original price was: ₹199.00.₹92.37Current price is: ₹92.37. (Excl. 18% GST)
- Senses bus voltages from 0 V to 26 V
- Reports shunt and bus voltage
- High accuracy
- Offset voltage: ±80 μV (max)
- Gain error: 0.25% (max)
- Configurable averaging options
- Four programmable addresses
- Programmable alert and warning outputs
- Power-supply operation: 2.7 V to 5.5 V
CJMCU-219 INA219 I2C Interface No Drift Bi-directional Current / Power Supply Monitoring Module
SKU:
POW0029
Original price was: ₹199.00.₹75.42Current price is: ₹75.42. (Excl. 18% GST)
- Reports Current, Voltage, and Power
- 0.1 ohm 1% 2W current sense resistor
- Up to +26V target voltage
- Up to ±3.2A current measurement, with ±0.8mA resolution
- 0.9″ x 0.8″ PCB
- PCB (no header or terminal block): 1.9g
Capacitive Soil Moisture Sensor V1.2
SKU:
SEN0063
Original price was: ₹189.00.₹51.00Current price is: ₹51.00. (Excl. 18% GST)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Dimensions mm(LxWxH): 98 x 23 x 4.
- Supports 3-Pin Gravity Sensor interface
- Analog output.
- Weight (gm): 15.
BMP180 Digital Barometric Pressure Sensor Module Normal Quality
SKU:
SEN0104
Original price was: ₹178.00.₹50.00Current price is: ₹50.00. (Excl. 18% GST)
- 1.8V to 3.6V Supply Voltage
- Low power consumption – 0.5uA at 1Hz
- I2C interface
- Max I2C Speed: 3.5Mhz
- Very low noise – up to 0.02hPa (17cm)
- Fully calibrated
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
BMP180 Digital Barometric Pressure Sensor Module High Quality
SKU:
SEN0103
Original price was: ₹356.00.₹210.00Current price is: ₹210.00. (Excl. 18% GST)
- 1.8V to 3.6V Supply Voltage
- Low power consumption – 0.5uA at 1Hz
- I2C interface
- Max I2C Speed: 3.5Mhz
- Very low noise – up to 0.02hPa (17cm)
- Fully calibrated
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
Bluetooth 4.0 NRF51822 Evaluation Kit
SKU:
DEV0041
Original price was: ₹2,631.00.₹1,312.00Current price is: ₹1,312.00. (Excl. 18% GST)
- 2.4 GHz multiprotocol RF transceiver
- ARM Cortex-M0 32 bit processor
- 128 bit AES HW encryption
- 256kB flash & 32kB RAM
- Programmable Peripheral Interconnect (PPI)
- 10 bit ADC
BLE Nano Integrated CC2540 Bluetooth Module with Soldering
SKU:
DEV0030
Original price was: ₹2,727.06.₹1,362.00Current price is: ₹1,362.00. (Excl. 18% GST)
- BLE chip: TICC2540
- Working channel: 2.4G
- Interface: Micro-USB
- Input voltage: Micro-USB power supply, Vin6~12V, 5V
- Microprocessor: ATmega328P-MU QFN32
- Bootloader: Latest arduino1.8.8
Pin: two rows 2.54mm-15Pin
Basic Starter Kit for R3 Projects
SKU:
SEN0171
Original price was: ₹2,501.00.₹1,120.00Current price is: ₹1,120.00. (Excl. 18% GST)
- The best option to starting learn about Arduino smd programming.
- High quality smd Uno R3 Basic Learning kit with 100% compatible with Arduino smd
- All components compatible with Arduino, can be used directly.
- Include High Quality Uno R3,830 tie-points Breadboard, Power Supply, Jumper Wires, Resistors, LED, etc.
ATMEGA16U2 Arduino Mega 2560 R3 Improved Version CH340G Board
SKU:
DEV0024
Original price was: ₹2,045.00.₹1,271.19Current price is: ₹1,271.19. (Excl. 18% GST)
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB
- Clock Speed: 16 MHz
AT24C256 I2C Interface EEPROM Memory Module
SKU:
MEM0001
Original price was: ₹120.00.₹58.00Current price is: ₹58.00. (Excl. 18% GST)
- Chipset : AT24C256.
- Operating Temperature: -55°C to 125°C.
- Storage Temperature: -65°C to 150°C.
- The voltage on Any Pin with respect to the ground: -1.0V to 6.25V.
- Maximum Operating Voltage: 6.25V DC.
AT-09 Bluetooth 4.0 UART Transceiver Module CC2541 Compatible with HM-10
SKU:
COM0003
Original price was: ₹510.00.₹247.00Current price is: ₹247.00. (Excl. 18% GST)
- Ultra-low standby power consumption 90uA~400uA
- Compatible with HM-10 Module protocol.
- Range up to 60 meters
- Built-in PCB antenna
- Power input : 3.6v to 5v DC
- Color: Blue
- Size: 43mm x 15mm
AS608 Fingerprint Reader Sensor Module Optical Fingerprint Fingerprint Module
SKU:
SEN0166
Original price was: ₹1,528.86.₹844.00Current price is: ₹844.00. (Excl. 18% GST)
- Resolution: 500dpi
- Supply current: <60mA
- Supply voltage: 3.3V
- Fingerprint image entry time: <1.0 seconds
- Peak current: <60mA
Arduino UNO+WiFi R3 ATmega328P+Node MCU ESP8266 CH340G Compatible Board
SKU:
DEV0026
Original price was: ₹799.00.₹448.31Current price is: ₹448.31. (Excl. 18% GST)
- Microcontroller- ATmega328IC
- Wi-Fi Module- ESP8266
- Input supply voltage (V)- 3.3 ~ 5
- Current consumption (mA)- 800
- Dimensions- 7 x 5.35 x 1.5cms
- Weight- 25 grams
Arduino UNO EK (एक) R4 Wi-Fi & Bluetooth – Made in India (Clone)
SKU:
DEV0033-2
Original price was: ₹1,999.00.₹1,134.00Current price is: ₹1,134.00. (Excl. 18% GST)
- Made in India 32-bit Arduino board with Wi-Fi & Bluetooth.
- Powered by Renesas R7FA4M1AB3CFM and ESP32-S3 module.
- 256 kB Flash, 32 kB SRAM, and 8 kB EEPROM.
- 12×8 programmable LED matrix for animations & games.
- 5V operating voltage, supports 6-24V input & USB-C power.
- Features DAC, CAN bus, and 14-bit ADC for advanced projects.
Arduino UNO DIP R3 Compatible Development Board
SKU:
DEV0022
Original price was: ₹1,245.00.₹389.00Current price is: ₹389.00. (Excl. 18% GST)
- Microcontroller: ATmega328P.
- Operating Voltage: 5V.
- Input Voltage: 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6.
- DC Current: 40mA.
- Flash Memory: 32 KB.
- SRAM: 2 KB.
- EEPROM: 1 KB.
- Clock Speed: 16 MHz.
Arduino leonardo R3 ATMEGA32U4 Board
SKU:
DEV0035
Original price was: ₹1,200.00.₹413.00Current price is: ₹413.00. (Excl. 18% GST)
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Input Voltage (Recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 20
- PWM Channels: 7
- Analog Input Channels: 12
Anti-theft Alarm Device Wireless Door/ Windows Anti-theft Device without Battery
SKU:
SEN0115
Original price was: ₹299.00.₹83.90Current price is: ₹83.90. (Excl. 18% GST)
- Operating Voltage: 3V (2 x AAA battery)
- Alarm Sound: 90dB
- Weight: 32 gm
AMT1011A Resistive Humidity Module Humidity Sensor
SKU:
SEN0074
Original price was: ₹837.00.₹198.24Current price is: ₹198.24. (Excl. 18% GST)
- Supply voltage (Vin): DC5V ± 5%.
- Current Consumption: 2mA (MAX 5mA).
- Operating temperature range: 0 to 60 ° C.
- Humidity range: 95% RH (non condensing).
- Humidity measuring range: 20 to 95% RH.
