GY-511 LSM303DLHC high- precision 3 Axis electronic compass acceleration sensor module
- Chip built-in 16-bit data output
- Operating Voltage: 3-5V DC
- Communication: I2C/IIC Protocol
- Accelerometer Range: ± 2 ± 4 ± 8 ± 16 g
- Magnetic Field Range:± 1.3 to ±8.1 gauss
5V Ultrasonic Sensor with RGB
- Product: Ultrasonic Sensor
- Operating Voltage: 3.5V to 5.5V
- Work Temperature Range: -40℃ to 100℃
- Resonant Frequency: 40KHz; 4
- Light changes based on input.
- Suitable for diverse projects.
- Easy to incorporate.
Official 7Semi INA240A2 4~80V Bidirectional Current Sense Amplifier Breakout, 50V/V Gain
- Fixed 50 V/V gain for accurate current measurement
-
Wide common-mode voltage range: –4V to 80V
-
Bidirectional current sensing support
-
Enhanced PWM rejection for noisy environments
-
Ideal for motor drives and power systems
-
Compact breakout for easy prototyping
Mini USBISP USBASP Programmer Aluminum for 51 single chip AVR (Random Colour)
- USBASP Board
- Mini size, with cover
- Support USB 1.0 or 2.0 interface
- Support S51 and the AVR chip programmer. fast and stable
- Standard IDC 10PIN interface
- Support software: AVR_FIGHTER, Progisp1.72
AM2320 Digital Temperature & Humidity Sensor
- Standard I2C and 1-Wire bus output (note we have not tried 1-Wire)
- Signal transmission distance up to 20 meters
- I2C interface (address 0x5c)
- 3.3V / 5V tolerant
- 0.1 C / % RH (relative humidity) resolution (+/- 0.5 C, 3% RH)
Digi ConnectCore® MP133 STM32MP133C with Arm® Cortex®-A7 Development Kit – 602-CC-WMP133-KIT-ND (included Dev Board)
- Gigabit Ethernet + 10/100 Mbit Ethernet
- (2) USB Host, 1 x USB OTG
- (2) CAN-FD
- MicroSD card
- PCIe minicard with SIM card holder
- MikroE Click boards™ connector
- Console over USB
- Digi XBee (including Digi XBee Cellular support)
- Audio (microphone and headphones)
- User buttons and LEDs
Official NUCLEO-C051C8 STM32C051C8 Nucleo-64 STM32C0 ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board
- STM32C051C8 MCU – ARM Cortex-M0+ with 64KB Flash.
- On-board ST-LINK – Built-in USB debugger/programmer.
- ARDUINO & ST morpho support – Easy hardware expansion.
- USB or external power – Flexible power supply options.
- STM32Cube & IDE support – Ready-to-use software and tools.
Official 7Semi EC200U-CN LTE 4G GNSS Ultra-compact Nano Modem
-
Official 7Semis 4G LTE USB Nano Modem
-
Powered by Quectel EC200U-CN LTE Cat-1 module
-
Supports LTE-FDD, LTE-TDD, and GSM/GPRS networks
-
Plug-and-play USB connectivity for PC and laptop
-
Ultra-compact size for space-constrained designs
-
Ideal for IoT, M2M, tracking, and industrial applications
-
Includes wide-band 4G LTE antenna (700–2700 MHz)
-
IPEX (u.FL) connector with 3M adhesive mounting
0.96 Inch SPI 6-Pin OLED Display Module (WHITE)
- Size: 0.96 inch
- Resolution: 128 x 64
- Controlling Driver Chip: SSD1306
- Display Area: 21.74 x 10.86mm
- Driving Voltage: 3.3-5V
- Operating Temperature: -40~70 Celsius
- Interface Type: SPI
- Light Color: WHITE
- Number of pins: 6
ACEBOTT QA019 ESP32 Max V3.0 with 1m Type-C Cable
- Model: ACEBOTT ESP32 Max V3.0
- Type: Microcontroller board
- Processor: 240 MHz dual-core
- Memory: 520 KB RAM, 4MB flash
- Connectivity: Wi-Fi, Bluetooth LE
Official MSP-EXP430FR2355 – MSP430FR2355 LaunchPad Development Kit
-
Powered by MSP430FR2355 ultra-low-power Value Line MCU
-
Includes 32KB FRAM & 4KB SRAM for flexible memory allocation
-
On-board debug probe for easy programming and energy measurement
-
Features 12-bit ADC, DACs, PGAs & enhanced comparators (eCOMPs)
-
Smart Analog Combo for advanced signal chain prototyping
-
Ambient light sensor & external analog connector included
-
Two user-programmable buttons and two LEDs
-
Ideal for data logging, sensor applications, and low-power systems
-
24MHz operation for faster processing in energy-constrained applications
-
Compatible with TI’s Code Composer Studio™ and IAR Embedded Workbench
ACEBOTT ESP8266 Quadruped Bionic Spider Robot – QD020
- Product type – Programmable Robot Kit
- Brand – ACEBOTT
- Model – QD020
- Robot type – Quadruped Bionic Spider Robot
- Microcontroller – ESP8266
- Programming language – C/C++
- Development platform – Arduino IDE
- Connectivity – WiFi
- Mounting type – Programmable Development Kit
- Application – STEM Education, Robotics and Electronic Projects
ZK-4KX DC Step Up and Step Down Adjustable Voltage Regulator with Dual Display (DC DC Buck Boost Converter CC CV 0.5-30V 4A Adjustable)
- Model: ZK-4KX
- Material: Fiber glass board, Electronic component
- Input Voltage: 5.0-30v
- Output Voltage: 0.5-30v
- Voltage Display resolution: 0.01V
- Current Display resolution: 0.001A
- Conversion Efficiency: about 88%
- Output Power: Natural heat dissipation 35W; Strengthen heat dissipation 50W
- Output Current: It can work stably at 3A for a long time, and can reach 4A under enhanced heat dissipation.
- Soft Start: Yes (The soft start may fail when it starts with high power and load module.)
AM312 Mini Infrared Human Motion Sensor
- Operating voltage: DC 2.7-12V;
- Static power consumption: <0.1mA;
- Delay time: 2 seconds;
- Block time: 2 seconds;
- Trigger mode: repeatable;
- Sensing range: ≤ 100 degrees cone angle, 3-5 meters; (according to the specific lens)
- Working temperature: -20 – + 60 ℃
- Module lens: a small lens
TTGO T-Call V1.4 ESP32 Wireless Module SIM Antenna SIMCard SIM800H Module CH9102F Chip
-
ESP32 dual-core processor with Wi-Fi + Bluetooth support
-
SIM800H GSM/GPRS module for voice, SMS, and mobile data
-
Built-in SIM card slot with external antenna for strong signal reception
-
CH9102F USB-to-serial chip for fast & stable programming/debugging
-
Multiple GPIOs for sensors, actuators, and IoT peripherals
-
Compatible with Arduino IDE, ESP-IDF & MicroPython
-
Low-power design, ideal for IoT & remote monitoring applications
-
Perfect for GPS tracking, smart agriculture, automation, and IoT projects
Official NUCLEO-C092RC Development Board, STM32 Nucleo-64, STM32C092RC MCU Eval Board
- External SMPS to generate Vcore logic supply
- 24 MHz or 48 MHz HSE
- External SMPS experimentation dedicated connector
- Micro-B or Mini-B USB connector for the ST-LINK
- MIPI® debug connector
Texas Instruments LAUNCHXL2-RM46 Hercules RM46x/RM46L852 LaunchPad Development Kit
- Microcontroller: RM46L852
- USB powered and capability for external 5v supply
- On board USB XDS110 debug
- On board SCI to PC serial communication
- User programmable push buttons
- Reset switches
- LEDs and Ambient light sensor
12mm 12528 LDR 10- 20K
- Diameter: 12 mm
- No. of pins: 2
- Type of mounting: PCB Through Hole
- Maximum Operating Temperature: +70˚C (Approx.)
- Dark resistance: 1-20MΩ
- Spectral peak: 560nm
- Maximum voltage: 250 VDC
- Maximum wattage: 200 mW
- Light resistance (10 Lux): 10-20 KΩ
- Dark resistance: 2 MΩ
- Resistance illumination: 3
- Response time: 20ms (Rise), 30ms (Down)
NUCLEO-L433RC-P Development Board, STM32 Nucleo-64, STM32L433RC MCU, Arduino Uno & ST Morpho Connectivity
- Product: NUCLEO-L433RC-P Development Board
- Core Architecture: ARM
- Core Sub-Architecture: Cortex-M4
- Silicon Family Name: STM32L4
- Silicon Core Number: STM32L433RC
- Silicon Manufacturer: STMicroelectronics
Official 7Semi STM32G050F6P6 STM32 Mini Development Board
-
STM32G050F6P6 microcontroller delivering strong processing capability with up to 48KB flash memory and 6KB RAM
-
Compact, pocket-sized design with essential peripherals including GPIOs, timers, and ADC for connecting sensors and actuators
-
Easy powering and programming through the onboard USB Micro-B connector for a clean and simple setup
-
Beginner-friendly layout with accessible documentation, datasheets, and example code
-
Broad compatibility with the STM32 ecosystem for both hobbyist and professional applications
-
Operating frequency up to 72 MHz
-
32K flash memory and 20K SRAM
