HC-06 4pin Bluetooth Module (Slave) Without Button
- Bases at CSR BC04 Bluetooth technology.
- with build-in 2.4GHz PCB antenna
- It’s at the Bluetooth class 2 power level.
- Range test: 10 meters
- Operating voltage: 3.3V to 6V DC
- Operating current in pairing is in the range of 30~40mA.
HC-06 4pin Bluetooth Module (Slave) Without Button
Original price was: ₹592.37.₹422.88Current price is: ₹422.88. (Excl. 18% GST)- Bases at CSR BC04 Bluetooth technology.
- with build-in 2.4GHz PCB antenna
- It’s at the Bluetooth class 2 power level.
- Range test: 10 meters
- Operating voltage: 3.3V to 6V DC
- Operating current in pairing is in the range of 30~40mA.
SPP-C Bluetooth Serial pass-Through Module Wireless Serial Communication from Machine Wireless SPPC Replace HC-05 HC-06
- 3.3V DC power supply
- Operating Frequency Band:2.4GHz -2.48GHz unlicensed ISM band
- Bluetooth Specification: V2.1+EDR
- Dimension (mm): 27 x 13 x 2
- Weight: 5 g
Unsoldered GY-9255 9DOF MPU9255 9-Axis Attitude +Gyro+Accelerator+Magnetometer Sensor Module
- Accelerometer, Gyroscope, and Magnetometer
- Power Supply: DC3.3V-5V
- Chip: MPU9255
- Size: 22 mm x 17 mm.
- Gyro range : ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- Magnetic field range: ± 4800uT
- 9 DOF modules
MMA7361 Angle Acceleration Sensor Module (Replace MMA7260 Acceleration Module)
- Low Current Consumption: 400 µA.
- Sleep Mode: 3 µA.
- Low Voltage Operation: 2.2 V – 3.6V.
- Fast Turn-On Time (0.5 ms Enable Response Time).
- Analog output for each axis.
- +5V operation @1ma current.
GP2Y0A710K0F 100cm to 500cm IR Distance Sensor with Cable
- Model: GP2Y0A02YK0F (100to 550 cm)
- Operating Voltage (VDC): 4.5 ~ 5.5
- Average Current Consumption (mA): 33
- Sampling Rate: 21-26Hz
- Distance Measuring Range (CM): 100 ~ 550
- Output Type: Analog Voltage
- Supply voltage:5V
- Current: 33-50mA
USB Blaster (ALTERA CPLD / FPGA download cable)
- Stably support SignalTap II embedded logic analyzer function, no mistake while crawling data.
- Fully support all Altera products such as CPLD: MAX3000, MAX7000, MAX9000 and MAXII.
- FPGA: Stratix, StratixII, StratxIII, Cyclone, CycloneII, CycloneIII, ACEX1K, APEX20K and FLEX10K etc.
- Active serial configuration device: EPCS1, EPCS4, EPCS16, EPCS64 etc.
- Enhanced configuration devices: EPC1, EPC4.
- Supports 3 download mode: AS, PS and JTAG
PICKIT3.5 KIT3.5 Programer Simulator without Microchip Logo
- Type: Debugger/Programmer
- Tool/Board Application: Debugging/Programming
- MCU Supported Families: Flash-based PIC MCUs
- Core Architecture: PIC, dsPIC
TTGO T-Beam V1.1 ESP32 LoRa 433MHz WiFi & Bluetooth Module with IPEX & 18650 Battery Holder
GPS
- NE0-6M GPS Modules: Support GPS protocol
- Onboard RTC crystal, Support interrupt/ wakeup
LoRa
- Long Range Low Power LoRa Transceiver
- High sensitivity: -i48dBm
- Transceive rate: 300 kbps
- Optional Hardware
- Version: SX1278[433Mhz]
Display Details
- OLED: 0.96 inch
- Driver: SSD1306
1.09″ Inch White 128×64 OLED Module 7pin CH1115 Chip (Compatible SSD1306)
- Display Size: 1.09 inches with bright white visuals.
- Resolution: 128×64 pixels for detailed output.
- Interface: 7-pin configuration for flexible connections.
- Chipset: CH1115, compatible with SSD1306.
- Power Efficiency: Low energy consumption.
3.5 inch SPI TFT Screen Display Module Interface 480*320 without Touch
- TFT Display
- 320×480 Pixel
- ILI9488
- SPI based Operation (other protocol can be configured)
- Clear contrast and Output
- Has SD card slot
3.5 inch SPI Touch Screen Module TFT Interface 480*320 with Touch
Official CYUSB3KIT-004 Cypress Semiconductor CYUSB301x EZ-USB FX3™ USB 3.0 Host/Controller Interface Evaluation Board
Official CYUSB3KIT-003 Cypress Semiconductor CYUSB301x EZ-USB FX3™ USB 3.0 Host/Controller Interface Evaluation Board
-
USB 3.0 Dev Kit: Enables quick evaluation of SuperSpeed USB functionality.
-
EZ-USB FX3 Controller: Built on the CYUSB301x USB 3.0 peripheral family.
-
ARM9 + 512 KB RAM: Supports flexible, high-performance firmware development.
-
GPIF II Interface: Connects easily to FPGAs, processors, ASICs, and image sensors.
-
Up to 5 Gbps Speed: Ideal for high-bandwidth data applications.
-
Complete Software Support: Includes FX3 SDK, drivers, and examples.
-
Easy Prototyping: Onboard debug and accessible I/O for fast development.
-
Affordable Solution: Cost-effective USB 3.0 integration platform.
Official NUCLEO-C092RC Development Board, STM32 Nucleo-64, STM32C092RC MCU Eval Board
- External SMPS to generate Vcore logic supply
- 24 MHz or 48 MHz HSE
- External SMPS experimentation dedicated connector
- Micro-B or Mini-B USB connector for the ST-LINK
- MIPI® debug connector
Official NUCLEO-8L152R8 Development Board, STM32 Nucleo-64, STM8L152R8 MCU Eval Board, On Board Debugger, Arduino Nano Extension, Reset Push Button
-
Microcontroller: STM8L152R8 MCU in LQFP64 package
-
Development Board Type: STM8 Nucleo-64
-
Connectivity: Arduino™ Uno V3 compatible and ST morpho headers
-
Power Efficiency: Low-power STM8 microcontroller suitable for energy-sensitive applications
-
Prototyping: Affordable and flexible platform for rapid development and experimentation
-
Expansion: Supports a wide range of shields, sensors, and modules for added functionality
-
Ease of Use: Open development platform with access to STM8 software libraries and firmware examples
-
Applications: Ideal for IoT devices, smart gadgets, educational projects, and embedded system prototyping
STMicroelectronics NUCLEO-N657X0-Q STM32 Nucleo-144 Development Board
- Brand: STMicroelectronics
- Type: MCU 32-Bit
- Core Processor: ARM Cortex-M55
- Mounting Type: Fixed
- Interconnect System: Arduino R3 Shield, ST Morpho, ST Zio
Official Arduino UNO Q Single Board Computer ABX00162(2GB RAM 16GB eMMC)
- Processor: Qualcomm Dragonwing QRB2210
- Microcontroller (MCU): STM32U585
- RAM/Storage: 2GB/16GB
- Connectivity: Wi-Fi 5, BT 5.1
- Debian OS : Linux & Zephyr
LM2577S+LM2596S Automatic Buck-Boost Power Module (Solar Energy Step-down and Step- up Module) (RED)
- Input : 3.5-28 Volts.
- Output : 1.25 Volts – 26 Volts.
- Output voltage independent of input voltage (3.5V-28V input, any value output 1.25V-26V).
- Maximum input current 3 Ampere.
- Maximum output 3 Ampere.
- Rated input 1 Ampere, Output 1 Ampere.
- Size : 5.2cm x 3.8cm x 2cm
2.4 Inch Touch Screen TFT Display Shield with SD Card Slot
- 2.4″ Touch LCD TFT display module for Arduino
- 240*320 pixels resolution
- Ability to display 262000 different colors
- The shield comes equipped with a microSD card slot.
- SPFD5408 controller with built-in video RAM buffer
