BLE Nano Integrated CC2540 Bluetooth Module with Soldering
- BLE chip: TICC2540
- Working channel: 2.4G
- Interface: Micro-USB
- Input voltage: Micro-USB power supply, Vin6~12V, 5V
- Microprocessor: ATmega328P-MU QFN32
- Bootloader: Latest arduino1.8.8
Nano V3.0 Atmega328P-AU FT232 Development Board(Mini USB)
- Using Atmel Atmega328P-AU MCU
- Support USB download and Power
- Support for external 5V ~ 12V DC power supply
- Support ISP download
- Small mini-B USB for programming and serial monitor.
NodeMcu Lua WIFI V2 Internet Development Board Based on ESP8266 (CP2102 + 30PIN + Type C)
-
Powerful ESP8266 Chip – Reliable Wi-Fi microcontroller for IoT projects
-
Modern Type-C Interface – Faster and more stable than micro-USB
-
30 GPIO Pins – Flexible for connecting sensors, relays & modules
-
Multiple Programming Options – Supports Arduino IDE & Lua
-
Stable Operation – CH340 USB-to-serial converter & voltage regulator
-
Ideal for IoT Applications – Smart home, automation & wireless networking
ESP8266 Expansion Board for 30PIN ESP32 Development Board
-
Compatible with 30-pin ESP8266 development boards
-
Expands 1 GPIO pin into 2 for easy reuse
-
Dual-layer PCB design ensures stable & reliable signals
-
Comes with Pin Header & Screw Terminal options
-
Pre-soldered board – ready to use, no extra soldering needed
-
Ideal for IoT, smart home & prototyping projects
ESP32-CAM-MB MICROUSB Download Module for ESP32 CAM Development Board – ESP32-CAM Programmer
- Model: ESP32-CAM-MB
- Color: Black
- Chipset: CH340G
- Connectivity Technology: USB
ESP32-CAM Development Board Test Board WiFi+ Bluetooth Module ESP32 Serial Port with OV2640 Camera
-
Built-in 2MP OV2640 camera for clear images and video
-
Supports WiFi + Bluetooth + BLE for wireless IoT projects
-
Ideal for IoT security cameras, AI vision & face recognition
-
Compatible with Arduino IDE, ESP-IDF, and MicroPython
-
Remote firmware upgrade for latest IoT features
-
Great for DIY electronics, robotics, and academic projects
TTGO SIM7600E-H Module ESP32- WROVER-B Chip WiFi Bluetooth 18560 Battery Holder Solar Charge Development Board CH9102F Chip
- Main chip:ESP32 WROVER-E
- Interface: USB, SD Card, Solar Input interface
- Car Clock:40MHz
- Button: Reset, Power switch
- Antenna: SIM Antenna，GPS Antenna
- Operating Temperature Range:-40-85 degrees
TTGO T-SIM7000G Module ESP32- WROVER-B Chip WiFi Bluetooth 18560 Battery Holder Solar Charge Development Board CH9102F Chip
- Main chip: ESP32-WROVER-B, SIM7000G
- Flash Memory:4M Flash / 8M PSRAM
- Interface: USB, SD Card, Solar Input interface
- Car Clock:40MHz
- Button: Reset, Power switch
- SIM Card Size: Nano SIM Card
- Antenna: SIM Antenna,GPS Antenna
- Operating Temperature Range:-40-85 degrees
TTGO T-Call V1.4 ESP32 Wireless Module SIM Antenna SIMCard SIM800H Module CH9102F Chip
-
ESP32 dual-core processor with Wi-Fi + Bluetooth support
-
SIM800H GSM/GPRS module for voice, SMS, and mobile data
-
Built-in SIM card slot with external antenna for strong signal reception
-
CH9102F USB-to-serial chip for fast & stable programming/debugging
-
Multiple GPIOs for sensors, actuators, and IoT peripherals
-
Compatible with Arduino IDE, ESP-IDF & MicroPython
-
Low-power design, ideal for IoT & remote monitoring applications
-
Perfect for GPS tracking, smart agriculture, automation, and IoT projects
2.8 inch SPI Screen Module TFT Interface 240 x 320 without Touch
- Touch Screen: No
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 240 x 320
- Driver IC : ILI9341
- PCB Size (mm): 85×48 (LxW)
- Display Size: 2.8″
- Weight: 31
2.8 inch SPI Touch Screen Module TFT Interface 240*320 with Touch
-
2.8 inch TFT LCD Display with 240×320 pixel resolution
-
SPI Interface for fast communication and fewer GPIO pins
-
Resistive Touch Screen with XPT2046 controller
-
ILI9341 Driver IC ensures stable and clear performance
-
Compatible with Arduino, ESP32, STM32, Raspberry Pi
-
Works on 3.3V–5V with onboard regulator
-
Optional SD Card Slot for graphics & data storage
-
Ideal for DIY projects, IoT devices, handheld gadgets, and embedded systems
140Pcs Black Heat Shrink Tube
-
Comprehensive Kit – Includes 140 pieces of polyolefin heat shrink tubing in assorted sizes and lengths.
-
Wide Size Range – Sizes from 1.5 x 30mm to 13.0 x 100mm for multiple applications.
-
High-Quality Material – Made from durable polyolefin with excellent insulation and wear resistance.
-
2:1 Shrink Ratio – Expands to cover larger areas and shrinks tightly for secure protection.
-
Electrical & Mechanical Protection – Prevents short circuits, moisture damage, and cable wear.
-
Easy to Use – Shrinks quickly with a heat gun or lighter, maintaining flexibility after shrinking.
-
Versatile Applications – Suitable for electronics, automotive wiring, cable repairs, and DIY projects.
-
Organized Storage – Comes neatly packed for easy size identification and quick access.
530pcs Colorful Heat Shrink Tubing Insulation
-
Length: 45 mm, Industrial-grade WOER (HST) heat shrink sleeves
-
Material: High-performance 2:1 shrink ratio tubing for superior insulation
-
Durability: Excellent weather, wear, and abrasion resistance
-
Function: Provides insulation, strain relief, cable bundling, and protection
-
Color-Coding: Multicolor set for easy wire identification and organization
-
Ease of Use: Shrinks easily with heat gun or lighter in about 10 seconds
-
Waterproof & Flexible: Creates a tight, moisture-resistant joint
-
Applications: Suitable for electronics, automotive, industrial, and DIY projects
-
Organization: Comes in a box with separate sections for each color
-
Quantity: Includes 12 assorted tubes for multiple use
STMicroelectronics STM32F429I-DISC1 Discovery MCU Development Kit with STM32F429ZI MCU, 2.4″ Qvga LCD 3-axis Mems Motion Sensor
-
Microcontroller: STM32F429ZIT6 (ARM® Cortex®-M4, 180 MHz, 2 MB Flash, 256 KB SRAM)
-
Integrated Debugger: ST-LINK/V2 embedded debug tool – no external programmer needed
-
Display: 2.4″ QVGA TFT LCD for graphical applications
-
Memory: 64 Mbit external SDRAM for memory-intensive projects
-
Sensors: ST MEMS gyroscope for motion detection and orientation sensing
-
USB Connectivity: USB OTG micro-AB connector (host & device support)
-
User Interface: Multiple LEDs and pushbuttons for quick prototyping
-
I/O Access: Easy access to MCU pins for hardware expansion
-
Software Support: Compatible with STM32Cube firmware, middleware, and examples
-
Applications: IoT devices, industrial controllers, multimedia systems, robotics, and embedded projects
Official Nordic Semiconductor NRF52833-DK – nRF52833 Bluetooth 5.1 mesh NFC Thread Zigbee 802.15.4/2.4 GHz Dev Kit
-
Multi-protocol support: Bluetooth 5.1, Bluetooth Mesh, Thread, Zigbee, 802.15.4, and 2.4 GHz proprietary.
-
Powered by nRF52833 SoC: ARM® Cortex®-M4 CPU with FPU, 512 KB Flash, and 128 KB RAM.
-
Arduino Uno Rev3 compatible: Works with a wide range of third-party shields.
-
Full I/O access: 42 GPIOs and interfaces via connectors.
-
Integrated PCB trace antenna and RF connector for direct RF testing.
-
External NFC antenna (included) for NFC-A tag functionality.
-
Supports Power Profiler Kit for precise power measurement.
-
Ideal for IoT, smart home, wearables, and industrial applications
Official Nordic Semiconductor NRF52-DK Development Kit nRF Sniffer Bluetooth Low Energy nRF52810, nRF52832 – Transceiver, ANT, Bluetooth® 5.x (BLE), NFC 2.4GHz Evaluation Board
-
Powerful Multiprotocol SoC – Supports Bluetooth® Low Energy, ANT, and 2.4 GHz proprietary protocols.
-
High-Performance Processor – 32-bit ARM® Cortex®-M4F CPU for efficient computation and signal processing.
-
Ample Memory – 512 kB Flash + 64 kB RAM for complex applications and data storage.
-
On-Air Compatibility – Works seamlessly with Nordic’s nRF51 Series, nRF24L, and nRF24AP products.
-
Ultra-Low Power Design – Optimized for long battery life in portable and IoT devices.
-
Advanced Bluetooth LE Features – High throughput, low latency, and extended range support.
-
ANT Protocol Support – Ideal for sports, fitness, and health monitoring applications.
-
Flexible Peripheral Interfaces – Includes SPI, I²C, UART, GPIOs for easy integration.
-
Compact & Versatile – Suitable for wearables, beacons, smart home, and industrial applications.
Official Nordic Semiconductor NRF5340-DK Development Kit nRF5340 Bluetooth Low Energy/SoC
-
Official Nordic Semiconductor Development Kit for the nRF5340 dual-core ARM® Cortex®-M33 SoC.
-
Supports Bluetooth Low Energy with 2 Mbps, Advertising Extensions, and Long Range.
-
Concurrent Bluetooth LE, Bluetooth Mesh, Thread, and Zigbee operation.
-
Additional protocol support: NFC, ANT, 802.15.4, and 2.4 GHz proprietary.
-
Bundled NFC antenna for quick NFC-A tag testing.
-
Integrated SEGGER J-Link debugger for on-board and external target programming/debugging.
-
Arduino Uno Rev3 compatible headers for expansion with shields.
-
Multiple GPIOs, buttons, and LEDs for hardware prototyping.
-
Fully supported by the nRF Connect SDK for fast software development.
-
Ideal for IoT, smart home, wearables, and industrial applications.
Official Nordic Semiconductor NRF52840-DONGLE – USB Dongle based on nRF52840
-
Compact USB Dongle powered by the Nordic Semiconductor nRF52840 SoC
-
Supports Bluetooth 5, Bluetooth mesh, Thread, ZigBee, 802.15.4, ANT, and 2.4 GHz proprietary protocols
-
Ideal for use with nRF Connect for Desktop for wireless development and testing
-
Low-cost hardware solution for prototyping short-range wireless applications
-
User-programmable RGB LED, green status LED, and button for custom applications
-
15 GPIO accessible via castellated solder points along the edge
-
Automatically programmed by supported nRF Connect for Desktop apps
-
Compatible with nRF5 SDK (board name: PCA10059) for example projects
-
Easy USB connectivity – no additional power source required
-
No onboard debug support; designed for programming and USB communication only
NRF52840-DK – nRF52840 Bluetooth 5 Bluetooth mesh Thread Zigbee 802.15.4 ANT 2.4 GHz Development Board
-
Supports Bluetooth 5, Bluetooth Mesh, Thread, Zigbee, 802.15.4, ANT, and 2.4 GHz proprietary protocols.
-
Powered by the nRF52840 SoC with support for nRF52811 development.
-
Includes NFC antenna for quick NFC-A tag functionality.
-
All GPIOs accessible via edge connectors and headers.
-
Equipped with 4 buttons and 4 LEDs for easy input/output testing.
-
Arduino Uno Rev 3 compatible for 3rd-party shield integration.
-
On-board SEGGER J-Link debugger for programming and debugging.
-
Debug Out header for external SoC debugging.
-
Compatible with Power Profiler Kit for power consumption analysis.
-
Ideal for IoT, wireless device prototyping, and development.
Official Renesas Electronics RTK7FPA0E2S00001BJ RA0E2 R7FA0E2 FPB-RA0E2 RA ARM® Cortex®-M23 MCU 32-Bit Embedded Evaluation Board
-
Equipped with Renesas RA0E2 MCU for versatile embedded applications
-
Built-in SEGGER J-Link™ emulator – no extra debugging tools required
-
Compatible with Arduino Uno™ and Pmod™ expansion modules
-
Through-hole access to all MCU pins for custom prototyping
-
Ideal for IoT, sensors, automation, and low-power projects
-
Includes sample software for quick and easy project start
-
Powered via USB for convenience in development
-
Perfect for students, engineers, and makers
