NUCLEO-G0B1RE STM32G0B1RE MCU Nucleo-64 Development Board
- Versatile Microcontroller: Powered by the STM32G0B1RE MCU in LQFP64 package, perfect for diverse applications.
- Efficient Power Management: Options for external or internal SMPS to optimize power consumption during operation.
- Seamless Connectivity: ARDUINO Uno V3 expansion and ST morpho headers for easy integration with a wide range of shields and modules.
- Comprehensive Software Support: Access to free software libraries and examples through the STM32Cube MCU Package, with support for various IDEs like IAR Embedded Workbench, MDK-ARM, and STM32CubeIDE.
- Integrated Debugging Tools: Built-in ST-LINK debugger/programmer, eliminating the need for external probes.
2.4 Inch Touch Screen TFT Display Shield with SD Card Slot
- 2.4″ Touch LCD TFT display module for Arduino
- 240*320 pixels resolution
- Ability to display 262000 different colors
- The shield comes equipped with a microSD card slot.
- SPFD5408 controller with built-in video RAM buffer
Official 7Semi VL53L1X ToF Distance Sensor Breakout – 4 Meter
- VL53L1X Time-of-Flight (ToF) sensor breakout for distance measurement.
- High-Precision Ranging – Measures distances up to 4 meters with ±5% accuracy and 1mm resolution.
- Fast Response – Supports measurement frequencies up to 50 Hz for real-time applications.
- I²C Communication – Simple digital interface for integration with microcontrollers and embedded systems.
- Compact & Reliable – Small breakout design with stable operation under varying lighting conditions.
- Wide Applications – Ideal for robotics, drones, autonomous navigation, smart sensing, and IoT devices.
DIY D2-1 Intelligent Tracing Car Kit (without battery)
Product Type:Car kit
Motor Type:BO motor
Power Supply(V):3.3V
Weighing Load Cell Sensor 5kg YZC-131 With Wire
- Model: YZC-131A
- Dimensions: 75 x 13 x 13 mm (L x W x H)
- Range: 5 kg
- Cable Length: 18 cm
- Fitting ScrewHole Size: M3
- Rated output: 1.0 0.1mV / V
- Nonlinear: 0.05% F.S
- Hysteresis: 0.0% F.S
- Repeatability: 0.05% F.S
NUCLEO-F756ZG STM32F756ZG MCU Nucleo-144 Development Board
- 3 user LEDs
- 2 user and reset push-buttons
- 32.768KHz crystal oscillator
- Flexible power-supply options: ST-LINK, USB VBUS or external sources
- On-board ST-LINK debugger/programmer with USB re-enumeration capability
- Comprehensive free software libraries and examples available with the STM32Cube MCU Package
- Support of a wide choice of IDEs including IAR™, Keil®, and GCC-based IDE
- Arm® Mbed Enabled™ compliant and Ethernet compliant with IEEE-802.3-2002
- USB OTG FS on Micro‑AB connector
- External or internal SMPS to generate Vcore logic supply
Official Texas Instruments TMDSDOCK28335 – Development Boards & Kits – TMS320 TMS320F28335 Experimenter Kit
- TMDSCNCD28335: TMS320F28335 DIMM100 based controlCARD
- DIMM100 Docking Station baseboard with DIMM100 controlCARD female connector
- XDS100v1 USB-to-JTAG Debug Probe enables real-time in-system programming and debugging
- Header pin access to key MCU signals – including most major digital IO and analog inputs
- Breadboard area for customizable routing/prototyping
- Board power can be provided by the provided USB cable or a 5V barrel supply
- Hardware Files are in C2000Ware at boards\controlCARDs\TMDSCNCD28335
Official 7Semi NEO-M9N GPS Breakout, Precision GNSS Positioning
-
High-precision multi-GNSS GPS breakout module
-
Supports GPS, GLONASS, Galileo, and BeiDou
-
Fast position update rate up to 25 Hz
-
3.3V operating voltage
-
I2C and UART communication interfaces
-
Low power consumption for battery-powered projects
-
Compact design for space-constrained applications
-
Ideal for drones, robotics, navigation, and IoT tracking
0.96 Inch SPI 7-Pin OLED Display Module with CS Pin (BLUE)
- Size: 0.96 inch
- Resolution: 128 x 64
- Controlling Driver Chip: SSD1306
- Display Area: 21.74 x 10.86mm
- Driving Voltage: 3.3-5V
- Operating Temperature: -40~70 Celsius
- Interface Type: SPI
- Light Color: BLUE
- Number of pins: 7
GY-302 BH1750 Light Intensity Module
- High precision determination accurate to 1 Lu for different lights
- Operating Voltage: 3-5VDC
- Built-in 16bit A/D converter
- I2C interface
INA240 Current Detection Amplifier Current Voltage Monitoring Bidirectional Module
- Wide -4V to 80V common-mode range
- Enhanced PWM suppression
- 200V/V fixed gain
- Analog voltage output
- Ideal for motor & solenoid control
LM393 Test Motor Speed Counter Sensor Groove Coupler Encoder Module
- Using imported groove optical coupling sensor, width 5mm.
- It has the output state light, if output high level, the lights are off. if output low level, it on.
- If it covered, it will output high level; otherwise, its output low level.
- Good signal and waveform, with a strong driving ability for more than 15mA.
- Equipped with a fixed bolt hole, easy install.
- Use the LM393 wide voltage comparer.
AM312 Mini Infrared Human Motion Sensor
- Operating voltage: DC 2.7-12V;
- Static power consumption: <0.1mA;
- Delay time: 2 seconds;
- Block time: 2 seconds;
- Trigger mode: repeatable;
- Sensing range: ≤ 100 degrees cone angle, 3-5 meters; (according to the specific lens)
- Working temperature: -20 – + 60 ℃
- Module lens: a small lens
TTGO T-Call V1.4 ESP32 Wireless Module SIM Antenna SIMCard SIM800H Module CH9102F Chip
-
ESP32 dual-core processor with Wi-Fi + Bluetooth support
-
SIM800H GSM/GPRS module for voice, SMS, and mobile data
-
Built-in SIM card slot with external antenna for strong signal reception
-
CH9102F USB-to-serial chip for fast & stable programming/debugging
-
Multiple GPIOs for sensors, actuators, and IoT peripherals
-
Compatible with Arduino IDE, ESP-IDF & MicroPython
-
Low-power design, ideal for IoT & remote monitoring applications
-
Perfect for GPS tracking, smart agriculture, automation, and IoT projects
Official NUCLEO-C092RC Development Board, STM32 Nucleo-64, STM32C092RC MCU Eval Board
- External SMPS to generate Vcore logic supply
- 24 MHz or 48 MHz HSE
- External SMPS experimentation dedicated connector
- Micro-B or Mini-B USB connector for the ST-LINK
- MIPI® debug connector
Texas Instruments LAUNCHXL2-RM46 Hercules RM46x/RM46L852 LaunchPad Development Kit
- Microcontroller: RM46L852
- USB powered and capability for external 5v supply
- On board USB XDS110 debug
- On board SCI to PC serial communication
- User programmable push buttons
- Reset switches
- LEDs and Ambient light sensor
12mm 12528 LDR 10- 20K
- Diameter: 12 mm
- No. of pins: 2
- Type of mounting: PCB Through Hole
- Maximum Operating Temperature: +70˚C (Approx.)
- Dark resistance: 1-20MΩ
- Spectral peak: 560nm
- Maximum voltage: 250 VDC
- Maximum wattage: 200 mW
- Light resistance (10 Lux): 10-20 KΩ
- Dark resistance: 2 MΩ
- Resistance illumination: 3
- Response time: 20ms (Rise), 30ms (Down)
NUCLEO-L433RC-P Development Board, STM32 Nucleo-64, STM32L433RC MCU, Arduino Uno & ST Morpho Connectivity
- Product: NUCLEO-L433RC-P Development Board
- Core Architecture: ARM
- Core Sub-Architecture: Cortex-M4
- Silicon Family Name: STM32L4
- Silicon Core Number: STM32L433RC
- Silicon Manufacturer: STMicroelectronics
Official 7Semi STM32G050F6P6 STM32 Mini Development Board
-
STM32G050F6P6 microcontroller delivering strong processing capability with up to 48KB flash memory and 6KB RAM
-
Compact, pocket-sized design with essential peripherals including GPIOs, timers, and ADC for connecting sensors and actuators
-
Easy powering and programming through the onboard USB Micro-B connector for a clean and simple setup
-
Beginner-friendly layout with accessible documentation, datasheets, and example code
-
Broad compatibility with the STM32 ecosystem for both hobbyist and professional applications
-
Operating frequency up to 72 MHz
-
32K flash memory and 20K SRAM
6Pin PL2303HXD USB to TTL/RS232
- Supports RS-232 serial interface with Programmable baud rate from 75 bps to 12 Mbps
- Compatible with the RS422/RS485 interface
- Extensive flow control mechanism like adjustable high/low watermark level, automatic hardware or software flow control, and inbound data buffer overflow detection.
-
The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB
- The TTL-232R cables are a family of USB to TTL serial UART converter cables incorporating FTD’s FT232RQ USB to Serial
- Cables are FCC, CE, RoHS compliant and are available at TTL levels 3.3V
-
It is USB 2.0 full speed compatible. The USB side of the cable is USB powered.
