MAX30102 Heart Rate and Pulse Oximeter Sensor Module
- LED peak wavelength: 660nm/880nm
- LED power supply voltage: 3.3~5V
- Detection signal type: light reflection signal (PPG)
- Output signal interface: I2C interface
SW-420 Normally Closed Alarm Vibration Sensor Module
- the use of the company’s production of SW-420 normally closed type vibration sensors.
- compactor output signal clean wave well, driving ability,
- 15mA rated voltage
- 3.3V-5V output
- digital switching output (0 and 1)
- a bolt-hole for easy installation small Board
- PCB dimensions: 32 mm x 14 mm using wide LM393 voltage compactor
18650 Li-ion Rechargeable Battery 2000mAh
- Battery Type: Lithium-Ion
- Output Voltage: 3.7 Volts
- Capacity: 2000 mAh
- Rechargeable: Yes
- Battery Size: 18mm x Length- 65mm
- Charging Method: CC-CV
Longer Version of 4 WD Double Layer Smart Car Chassis Kit
- Very handy and simple in assembling/disassembling.
- Strong components so as to withstand extreme terrain conditions.
- Transparent Car Chassis.
- Attractive design.
ESP32-CAM-MB MICROUSB Download Module for ESP32 CAM Development Board – ESP32-CAM Programmer
- Model: ESP32-CAM-MB
- Color: Black
- Chipset: CH340G
- Connectivity Technology: USB
ESP32 Development Board TYPE-C/Micro USB ESP32 Expansion Board 38PIN Female header
- Interface type: Standard 38Pin interface
- USB interface: 1
- TYPE-C interface: 1
- DC interface: 1
2.4-inch SPI Interface 240×320 TFT Display Module without Touch
- It is a 2.4″ SPI TFT LCD Screen Module
- No Touch Screen
- 10pins interface.
- The LCD drive ic is ILI9341.
- It’s a 240 * 320 (resolution),
LCD1602 Parallel LCD Display with Grey Backlight
- 16×2 LCD (16 characters per line, 2 lines).
- Shows white characters on a grey background.
- Equipped with a backlight for enhanced visibility in low-light conditions.
- Easily interfaces with Arduino and other microcontrollers.
- Suitable for a wide range of applications requiring basic text display and user interaction.
NUCLEO-L031K6 Development Board, STM32 Nucleo-32, STM32L031K6 MCU Eval Board, On Board Debugger, Arduino Nano Extension, Reset Push Button
- Product: NUCLEO-L031K6 Development Board
- Core Architecture: ARM
- Extension with Arduino™ nano connectivity
- Core Sub-Architecture: Cortex-M0+
- Silicon Family Name: STM32L0
- Silicon Core Number: STM32L031K6
- Silicon Manufacturer: STMicroelectronics
2WD Mini Round Double-Deck Smart Robot Car Chassis DIY Kit
-
Compact 2WD round double-deck chassis
-
Includes 2 geared BO motors and rubber wheels
-
Made from strong, transparent acrylic plates
-
Ideal for Arduino/Raspberry Pi/ESP32 projects
-
Supports multiple sensors and wireless modules
-
Great for line-followers, obstacle avoiders, and DIY robotics
Official 7Semi STM32G030C8T6 ARM STM32 mini Development Board
-
High-Performance MCU: ARM Cortex-M0+ 32-bit core running at 64 MHz for efficient processing
-
Ample Flash Storage: Equipped with 64 KB Flash memory to support complex codebases
-
Breadboard-Compatible: Designed to plug directly into breadboards for simplified prototyping
-
Modern USB-C Connectivity: Reversible USB Type-C port for easy, reliable power and data connection
-
Integrated Reset Button: Easily reset the board during development and testing
-
Dual Programming Support: Supports ST bootloader flashing and SWD-based debugging/programming tools
-
Compact and Durable Design: Small footprint and robust construction ideal for embedded environments
Heart Rate Monitor Kit with AD8232 ECG sensor module
- Designed to extract, amplify, and filter small biopotential signals.
- Leads-Off Detection.
- Shutdown Pin.
- LED Indicator.
- Analog Output.
- 3.5 mm Jack for Biomedical Pad Connection.
Tactile Push Button Switch 6x6x5mm 4pin
- Ideal for Through-hole applications.
- Shaft Shape: Round
- Used in the fields of electronic products, household appliances and more.
-
This light touch switch is waterproof, prevent oil, anti-pollution, anti-static interference.
-
High precision mechanism design offers acute operation and long service life.
-
Compact and lightweight, easy to carry and dismantling.
-
Good electrical conductivity.
315MHz Four Button Wireless Remote Control Kit without Battery
- No. of the channel: 4
- Operating mode: Non-Locking
- Receiver Operating voltage: DC 5V.
- Receiver sensitivity is: -98dB.
- Transmitter Operating voltage: DC 12V
- Transmitting frequency: 315 MHz.
- Transmitter Operating current: 10mA at 12V.
- Transmitter Radiated power: 10mW at 12V.
- Transmission distance (m): 3 to 5.
MAX6675 Thermocouple Sensor Module
- High impedance differential inputs.
- Thermocouple break detection.
- 2000V of ESD signal.
- Embedded thermocouple break detection circuitry.
- Compatible with K-type temperature probe
- Simple SPI serial output temperature.
Official CYUSB3KIT-003 Cypress Semiconductor CYUSB301x EZ-USB FX3™ USB 3.0 Host/Controller Interface Evaluation Board
-
USB 3.0 Dev Kit: Enables quick evaluation of SuperSpeed USB functionality.
-
EZ-USB FX3 Controller: Built on the CYUSB301x USB 3.0 peripheral family.
-
ARM9 + 512 KB RAM: Supports flexible, high-performance firmware development.
-
GPIF II Interface: Connects easily to FPGAs, processors, ASICs, and image sensors.
-
Up to 5 Gbps Speed: Ideal for high-bandwidth data applications.
-
Complete Software Support: Includes FX3 SDK, drivers, and examples.
-
Easy Prototyping: Onboard debug and accessible I/O for fast development.
-
Affordable Solution: Cost-effective USB 3.0 integration platform.
Official LP-AM261 AM261x Arm®-based MCU General-Purpose LaunchPad™ Development Kit
-
Official TI LaunchPad™ for AM261x Arm®-based microcontrollers
-
Powered by Arm® Cortex®-R52 for high performance and real-time control
-
Low-cost and general-purpose development platform
-
Supports BoosterPack™ plug-in modules for easy expansion
-
On-board debug interface for faster prototyping
-
Multiple I/O interfaces – UART, SPI, I²C, CAN, GPIO
-
Compatible with TI MCU LaunchPad™ ecosystem
-
Ideal for industrial control, IoT, and automation applications
USB Blaster (ALTERA CPLD / FPGA download cable)
- Stably support SignalTap II embedded logic analyzer function, no mistake while crawling data.
- Fully support all Altera products such as CPLD: MAX3000, MAX7000, MAX9000 and MAXII.
- FPGA: Stratix, StratixII, StratxIII, Cyclone, CycloneII, CycloneIII, ACEX1K, APEX20K and FLEX10K etc.
- Active serial configuration device: EPCS1, EPCS4, EPCS16, EPCS64 etc.
- Enhanced configuration devices: EPC1, EPC4.
- Supports 3 download mode: AS, PS and JTAG
Official 7Semi STM32G0B1RET6 Development Board – Arm Cortex-M0+ MCU, 512KB Flash, 144KB RAM
- Beginner-friendly layout with labeled headers and USB power
- CAN (FDCAN) support – ideal for automotive and industrial use
- Built-in ADC, DAC, PWM, and timers – ready for sensing and control
- Up to 64 GPIO pins – tons of I/O flexibility for your sensors, displays, and peripherals
- Plug-and-play USB-C for input power with onboard reset/user buttons and LED indicators
ATMEGA16U2 Arduino Mega 2560 R3 Improved Version CH340G Board
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB
- Clock Speed: 16 MHz
