GP2Y0A710K0F 100cm to 500cm IR Distance Sensor with Cable
- Model: GP2Y0A02YK0F (100to 550 cm)
- Operating Voltage (VDC): 4.5 ~ 5.5
- Average Current Consumption (mA): 33
- Sampling Rate: 21-26Hz
- Distance Measuring Range (CM): 100 ~ 550
- Output Type: Analog Voltage
- Supply voltage:5V
- Current: 33-50mA
USB Blaster (ALTERA CPLD / FPGA download cable)
- Stably support SignalTap II embedded logic analyzer function, no mistake while crawling data.
- Fully support all Altera products such as CPLD: MAX3000, MAX7000, MAX9000 and MAXII.
- FPGA: Stratix, StratixII, StratxIII, Cyclone, CycloneII, CycloneIII, ACEX1K, APEX20K and FLEX10K etc.
- Active serial configuration device: EPCS1, EPCS4, EPCS16, EPCS64 etc.
- Enhanced configuration devices: EPC1, EPC4.
- Supports 3 download mode: AS, PS and JTAG
PICKIT3.5 KIT3.5 Programer Simulator without Microchip Logo
- Type: Debugger/Programmer
- Tool/Board Application: Debugging/Programming
- MCU Supported Families: Flash-based PIC MCUs
- Core Architecture: PIC, dsPIC
PICKIT2 Programmer Simulator Debugger
| Brand | EmbeTronicX |
| CPU Socket | LGA 4677 |
| Compatible Devices | Personal Computer |
| RAM Memory Technology | LPDDR3 |
| Chipset Type | AMD 785G |
TTGO T-Beam V1.1 ESP32 LoRa 433MHz WiFi & Bluetooth Module with IPEX & 18650 Battery Holder
GPS
- NE0-6M GPS Modules: Support GPS protocol
- Onboard RTC crystal, Support interrupt/ wakeup
LoRa
- Long Range Low Power LoRa Transceiver
- High sensitivity: -i48dBm
- Transceive rate: 300 kbps
- Optional Hardware
- Version: SX1278[433Mhz]
Display Details
- OLED: 0.96 inch
- Driver: SSD1306
1.3″ Inch 240*240 RGB TFT IPS SPI LCD Module 7pin ST7789 Chip
- High Resolution: 240×240 pixels for sharp visuals.
- ST7789 Driver: Ensures smooth and reliable performance.
- SPI Interface: Quick communication with microcontrollers.
- Full-Color Display: Clear, vibrant visuals in full color.
- Wide Voltage Range: Operates between 3.3V and 5V.
- Compact Size: Ideal for small devices and embedded systems.
1.14″ 135×240 RGB TFT LCD Module 8pin with ST7789 Chip
- 1.14-inch Screen Size
- 135×240 Resolution
- ST7789 Controller
- Color Display Screen
- Display Area: 14.864*24.912mm
- Size: 28*31.4mm
1.09″ Inch White 128×64 OLED Module 7pin CH1115 Chip (Compatible SSD1306)
- Display Size: 1.09 inches with bright white visuals.
- Resolution: 128×64 pixels for detailed output.
- Interface: 7-pin configuration for flexible connections.
- Chipset: CH1115, compatible with SSD1306.
- Power Efficiency: Low energy consumption.
0.96 Inch 80*160 IPS TFT Module 8pin (with GND VCC) ST7735 Chip
- Product Type: TFT
- Resolution: 80*160
- Display Size: 0.96 Inch
- No.of Pins: 8
3.5 inch SPI TFT Screen Display Module Interface 480*320 without Touch
- TFT Display
- 320×480 Pixel
- ILI9488
- SPI based Operation (other protocol can be configured)
- Clear contrast and Output
- Has SD card slot
3.5 inch SPI Touch Screen Module TFT Interface 480*320 with Touch
Official CYUSB3KIT-004 Cypress Semiconductor CYUSB301x EZ-USB FX3™ USB 3.0 Host/Controller Interface Evaluation Board
Official CYUSB3KIT-003 Cypress Semiconductor CYUSB301x EZ-USB FX3™ USB 3.0 Host/Controller Interface Evaluation Board
-
USB 3.0 Dev Kit: Enables quick evaluation of SuperSpeed USB functionality.
-
EZ-USB FX3 Controller: Built on the CYUSB301x USB 3.0 peripheral family.
-
ARM9 + 512 KB RAM: Supports flexible, high-performance firmware development.
-
GPIF II Interface: Connects easily to FPGAs, processors, ASICs, and image sensors.
-
Up to 5 Gbps Speed: Ideal for high-bandwidth data applications.
-
Complete Software Support: Includes FX3 SDK, drivers, and examples.
-
Easy Prototyping: Onboard debug and accessible I/O for fast development.
-
Affordable Solution: Cost-effective USB 3.0 integration platform.
T856-C Power Bank Charging Circuit Module (5V USB Step Up Type C Charging Module)
- Input Voltage: 3. 7V~5. 5V
- Output voltage: 5V, BAT Discharging Stop Voltage: 2. 9V
- Discharging Efficiency: 85%(input 3. 7V output 5V/1A)
- Charging Interface: C-Type USB port
- Under Voltage Protection
GPS NEO-M8N Satellite Positioning Module Development Board for Arduino STM32 51(with Battery)
- Model: NEO M8N GPS Module
- Default baud rate: 9600.
- Supply Voltage: 3V to 5V
- Antenna size 25*25mm
- Module size 25mm*35mm
- Mounting aperture 3mm
GPS NEO-7M Satellite Positioning Module Development Board for Arduino STM32 51(with Battery)
- On-board with ceramic antenna,
- Welded with an SMA head
- Reserved serial port interface
- Comes with a signal indicator
GPS NEO-6M Satellite Positioning Module Development Board for Arduino STM32 51(with Battery)
- Product: GPS NEO-6M Satellite Positioning Module Development Board for Arduino STM32 51
- 5Hz position update rate
- Operating temperature range: -40 TO 85°CUART TTL socket
- EEPROM to save configuration settings
- Rechargeable battery for Backup
Official NUCLEO-C092RC Development Board, STM32 Nucleo-64, STM32C092RC MCU Eval Board
- External SMPS to generate Vcore logic supply
- 24 MHz or 48 MHz HSE
- External SMPS experimentation dedicated connector
- Micro-B or Mini-B USB connector for the ST-LINK
- MIPI® debug connector
Official NUCLEO-8L152R8 Development Board, STM32 Nucleo-64, STM8L152R8 MCU Eval Board, On Board Debugger, Arduino Nano Extension, Reset Push Button
-
Microcontroller: STM8L152R8 MCU in LQFP64 package
-
Development Board Type: STM8 Nucleo-64
-
Connectivity: Arduino™ Uno V3 compatible and ST morpho headers
-
Power Efficiency: Low-power STM8 microcontroller suitable for energy-sensitive applications
-
Prototyping: Affordable and flexible platform for rapid development and experimentation
-
Expansion: Supports a wide range of shields, sensors, and modules for added functionality
-
Ease of Use: Open development platform with access to STM8 software libraries and firmware examples
-
Applications: Ideal for IoT devices, smart gadgets, educational projects, and embedded system prototyping
Official NUCLEO-C051C8 STM32C051C8 Nucleo-64 STM32C0 ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board
- STM32C051C8 MCU – ARM Cortex-M0+ with 64KB Flash.
- On-board ST-LINK – Built-in USB debugger/programmer.
- ARDUINO & ST morpho support – Easy hardware expansion.
- USB or external power – Flexible power supply options.
- STM32Cube & IDE support – Ready-to-use software and tools.
