Official 7Semi INA240A1 4~80V Bidirectional Current Sense Amplifier Breakout 20V/V Gain
-
Texas Instruments INA240 current-sense amplifier
-
Fixed 20 V/V gain for precise current measurement
-
Wide common-mode voltage range: –4V to 80V
-
Enhanced PWM rejection for noisy environments
-
Supports bidirectional current sensing
-
Ideal for motor drives and power management systems
-
Easy-to-use breakout board for rapid integration
Official 7Semi DC-DC Buck Converter 5V 3A Out – MP2338
-
5V Regulated DC Output
-
Up to 3A Output Current
-
Based on MP2338 Buck Regulator IC
-
Input Voltage up to ~24V
-
High Efficiency Switching Design
-
Thermal Shutdown Protection
-
Cycle-by-Cycle Current Limiting
-
Compact Breakout Board
-
Easy Breadboard & PCB Integration
-
Ideal for Microcontrollers & Sensors
3.5 inch TFT Shield LCD Module 480×320 for Arduino Uno with Touch(Parallel Interface)
-
3.5-inch TFT LCD screen size
-
480 × 320 pixel resolution
-
65K RGB color display
-
ILI9486 display driver IC
-
8-bit parallel interface
-
Resistive touch panel support
-
On-board micro-SD card slot for media loading
-
Compatible with both 5V and 3.3V logic levels
ESD-15 ESD Antistatic Tweezers (Bent Tip)
- Material: Stainless Steel
- Color: Black
- Quality: High Quality
Texas Instruments LAUNCHXL-F280025C F280025C LaunchPad development kit
-
Based on TI C2000™ F28002x real-time microcontroller
-
Low-cost LaunchPad™ development and evaluation board
-
Designed for real-time control applications
-
Extended version with additional I/O pins
-
Supports connection of two BoosterPack™ plug-in modules
-
Compatible with the TI MCU LaunchPad ecosystem
GPS NEO-M8N Satellite Positioning Module Development Board for Arduino STM32 51(with Battery)
- Model: NEO M8N GPS Module
- Default baud rate: 9600.
- Supply Voltage: 3V to 5V
- Antenna size 25*25mm
- Module size 25mm*35mm
- Mounting aperture 3mm
Unsoldered Black STM32F401CCU6 Development Board (Type C)
- Model: STM32F401CCU6
- Memories: Up to 256 Kbytes of Flash memory, 512 bytes of OTP memory, Up to 64 Kbytes of SRAM
- 1× 12-bit, 2.4 MSPS A/D converter: Up to 16 channels
- General-purpose DMA: 16-stream DMA controllers with FIFOs and burst support
- 256 Kbytes of Flash memory
- 84 MHz CPU with ART Accelerator
- Item Type: Other Board
- Based On: STM32
- USB Connector: Type-C
- Product Size: 53x21x8mm
- Weight (g): 7
Official Nordic Semiconductor NRF52840-DONGLE – USB Dongle based on nRF52840
-
Compact USB Dongle powered by the Nordic Semiconductor nRF52840 SoC
-
Supports Bluetooth 5, Bluetooth mesh, Thread, ZigBee, 802.15.4, ANT, and 2.4 GHz proprietary protocols
-
Ideal for use with nRF Connect for Desktop for wireless development and testing
-
Low-cost hardware solution for prototyping short-range wireless applications
-
User-programmable RGB LED, green status LED, and button for custom applications
-
15 GPIO accessible via castellated solder points along the edge
-
Automatically programmed by supported nRF Connect for Desktop apps
-
Compatible with nRF5 SDK (board name: PCA10059) for example projects
-
Easy USB connectivity – no additional power source required
-
No onboard debug support; designed for programming and USB communication only
TTGOT-Display ESP32 Development Board 1.14 Inch LCD Control Board 4MB CH9102F Chip
- MCU: ESP32 Xtensa dual-core LX6 microprocessor
- Wireless Connectivity: Wi-Fi 802.11 b/ g/ n, BL V4.2+BLE
- Programming Platform: Arduino-ide, Micropython
- Serial chip: CH9102
- Optional Flash: 4M/16M
- Onboard functions Buttons: l006+I007, battery power detection
NUCLEO-U083RC STM32U083RC MCU STM32 Nucleo-64 Development Board
- Targeted STM32U083RCT6 ultra-low-power Arm Cortex-M0+ MCU in LQFP64 package
- USB Type-C® connector
- Cryptography
- 1 user LED shared with ARDUINO, 1 user and 1 reset push-buttons
- 32.768KHz crystal oscillator
- Flexible power-supply options: ST-LINK USB VBUS or external sources
160mAh 3.7V Single Cell Rechargeable LiPo Battery UK-041018P
- Product: Small Li-Po Battery
- Voltage: 3.7 Volts
- Capacity: 160mAh
- Reusability: Rechargeable
- Battery Cell Composition: Lithium
- Low self-discharge rate
- High performance and capacity
NUCLEO-H755ZI-Q STM32H755ZI MCU STM32 Nucleo-144 Development Board
- STM32 microcontroller in an LQFP144, TFBGA225, or VFBGA264 package
- 3 user LEDs
- 1 user push-button and 1 reset push-button
- 32.768 kHz crystal oscillator
SPI to Ethernet Hardware TCP/IP W5500 Ethernet Network Module
- Supports 8 independent sockets simultaneously.
- Internal 32Kbytes Memory for Tx/Rx Buffers.
- Power off mode: support.
- Network wake: support.
- Factory and Building Automation
- Medical Monitoring Equipment
Water Quality Sensor TDS Water Quality Testing Probe
- Input Voltage: 5 V
- measuring range 0-3000PPM,
- Measurement accuracy 2%,
- connector: Plug 1/4″ PE
- Probe Diameter 6.35mm
13.56MHz RFID IC Key Tags
- Material : ABS
- Chip Type : FM1108 Fudan
- Response Frequency : 13.56 MHz
- Dimensions (mm) LxWxH : 40.5 mm * 32 mm * 4.2 mm
- Memory Capacity : 8 Kbit
SW-420 Normally Closed Alarm Vibration Sensor Module
- the use of the company’s production of SW-420 normally closed type vibration sensors.
- compactor output signal clean wave well, driving ability,
- 15mA rated voltage
- 3.3V-5V output
- digital switching output (0 and 1)
- a bolt-hole for easy installation small Board
- PCB dimensions: 32 mm x 14 mm using wide LM393 voltage compactor
LM35D Analog Temperature Sensor Module + Cable
- Based on the semiconductor LM35 temperature sensor
- Can be used to detect ambient air temperature
- Calibrated directly in °Celsius (Centigrade)
- Linear + 10 mV/°C Scale Factor
- 0.5°C Ensure accuracy (at +25°C)
- Low power consumption, less than 60uA
- Low output impedance, 1mA current through only 0.1Ω
- With screw holes for easy installation and fixed. Aperture 2.6mm
4PIN IR Infrared Flame Detection Sensor Module
- High Photo Sensitivity
- Fast Response Time
- Sensitivity adjustable
- Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
- Detection range: up to 100 cm.
- Adjustable detection range.
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
- Comparator chip LM393 makes module readings stable.
- Operating voltage 3.3V-5V.
- Digital and Analog Output.
- Power indicator and digital switch output indicator.
RTC DS1307 24C32 Real Time Clock Module without CR2032 Battery
- Two-wire I2C interface.
- Hour: Minutes: Seconds AM/PM.
- Day Month, Date – Year.
- DS1307 based RTC (Battery include).
- 1Hz output pin.
- Available in 8-pin DIP or SOIC
KY-004 Tactile Switch Module
- Operating voltage 3,3 V – 5 V
- Operating temperature -25 °C – 105°C
- Lifetime 100.000 Zyklen
- Dimensions 18 x 15 x 6 mm
