LAUNCHXL-F2800157 – C2000 MCU F2800157 LaunchPad Development Kit
- Microcontroller: TMS320F2800157
- Clock Speed: 120 MHz
- Debugger: XDS110 Onboard
- Connectivity: USB, GPIO, BoosterPack headers
- Operating Voltage: 3.3V / 5V compatible
Official LAUNCHXL-F28P55X C2000™ Real-Time MCU LaunchPad™ Development Kit
-
Official TI C2000™ LaunchPad™ for F28P55x real-time microcontrollers
-
Low-cost and developer-friendly evaluation & prototyping board
-
Extended version with extra pins for enhanced connectivity
-
Supports two BoosterPack™ plug-in modules simultaneously
-
Cross-compatible with the TI MCU LaunchPad™ ecosystem
-
Ideal for motor control, digital power, and industrial automation projects
NUCLEO-F767ZI – STM32 Nucleo-144 Development Board with STM32F767ZI MCU, supports Arduino, ST Zio and morpho connect
1. 100% Brand new and high quality STM32 Board
2. Model: STM32F767ZI
3. Core: ARM Cortex-M7 MCU
4. up to 216 MHz clock speed
5. 2 MB Flash, and 512 KB RAM
6. Operating voltage of 3.3 V and temperature range of -40°C to +85°C.
NUCLEO-WB55RG Development Board STM32WB Nucleo-64, STM32WB55RGV6U 32bit ARM Cortex-M0+ Cortex-M4
- Model: NUCLEO-WB55RG Development Board STM32WB Nucleo-64
- Memory: 1-Mbyte Flash memory, 256-Kbyte SRAM
- RF transceiver: 2.4 GHz
- ARDUINO Uno V3 expansion connector
- CPU: Dual-core 32‑bit (Arm Cortex-M4 and dedicated M0+ CPU
STMICROELECTRONICS STM32F0 DISCOVERY Evaluation Kit, STM32F0 MCU, On-Board ST-LINK/V2 Debugger/Programmer
- Product: STM32F0 DISCOVERY Evaluation Kit
- Processor: STM32F051R8T6
- RAM: 8KB
- Power Supply: 3V and 5V
- Flash Memory: 64KB Flash
NUCLEO-H563ZI STM32H563ZIT6 MCU Nucleo-144 Development Board
- STM32 microcontroller in an LQFP144 package
- 32.768 kHz crystal oscillator
- STM32H563ZIT6
- Nucleo Board STM32H563ZIT6, Software
NUCLEO-F756ZG STM32F756ZG MCU Nucleo-144 Development Board
- 3 user LEDs
- 2 user and reset push-buttons
- 32.768KHz crystal oscillator
- Flexible power-supply options: ST-LINK, USB VBUS or external sources
- On-board ST-LINK debugger/programmer with USB re-enumeration capability
- Comprehensive free software libraries and examples available with the STM32Cube MCU Package
- Support of a wide choice of IDEs including IAR™, Keil®, and GCC-based IDE
- Arm® Mbed Enabled™ compliant and Ethernet compliant with IEEE-802.3-2002
- USB OTG FS on Micro‑AB connector
- External or internal SMPS to generate Vcore logic supply
Texas Instruments LAUNCHXL-F280025C F280025C LaunchPad development kit
-
Based on TI C2000™ F28002x real-time microcontroller
-
Low-cost LaunchPad™ development and evaluation board
-
Designed for real-time control applications
-
Extended version with additional I/O pins
-
Supports connection of two BoosterPack™ plug-in modules
-
Compatible with the TI MCU LaunchPad ecosystem
STM32F407G-DISC1 Discovery Board with STM32F407VG MCU – MB997D
-
STM32F407VGT6 featuring 32-bit ARM Cortex -M4 with FPU core, 1-Mbyte Flash, 192-Kbyte RAM
-
On-board ST-LINK/V2 on STM32F407G-DISC1
-
USB ST-LINK with re-enumeration capability and three different interfaces:
-
Debug port
-
Virtual Com port
-
Mass storage
-
-
Board power supply: through USB bus or from an external 5 V supply voltage
STMicroelectronics STM32F429I-DISC1 Discovery MCU Development Kit with STM32F429ZI MCU, 2.4″ Qvga LCD 3-axis Mems Motion Sensor
-
Microcontroller: STM32F429ZIT6 (ARM® Cortex®-M4, 180 MHz, 2 MB Flash, 256 KB SRAM)
-
Integrated Debugger: ST-LINK/V2 embedded debug tool – no external programmer needed
-
Display: 2.4″ QVGA TFT LCD for graphical applications
-
Memory: 64 Mbit external SDRAM for memory-intensive projects
-
Sensors: ST MEMS gyroscope for motion detection and orientation sensing
-
USB Connectivity: USB OTG micro-AB connector (host & device support)
-
User Interface: Multiple LEDs and pushbuttons for quick prototyping
-
I/O Access: Easy access to MCU pins for hardware expansion
-
Software Support: Compatible with STM32Cube firmware, middleware, and examples
-
Applications: IoT devices, industrial controllers, multimedia systems, robotics, and embedded projects
ACEBOTT Bionic Biped Robot Kit for Arduino ESP32 – QD021
- Brand Name : ACEBOTT
- Model Number : QD021
- Category : STEAM & STEM Kit, STEAM & STEM Toy, Robot Kit
- Type : Bionic Biped Robot Kit
- Recommended Age : For Age 12+ & Makers
- Application : Scientific & Educational Toys, Home STEAM & STEM Education, Classroom STEAM & STEM Education
- Controller Boards : ESP32
- Programming Arduino, ACECode
Texas Instruments EK-TM4C123GXL ARM Cortex-M4F Based MCU TM4C123G LaunchPad Evaluation Kit
- TM4C123GH6PM ARM Cortex-M4F micro controller from Texas Instruments
- Create amazing projects using free development software available from TI
- The EK-TM4C123GXL also features programmable user buttons and an RGB LED for custom applications
TTGO T-Beam V1.1 ESP32 LoRa 433MHz WiFi & Bluetooth Module with IPEX & 18650 Battery Holder
GPS
- NE0-6M GPS Modules: Support GPS protocol
- Onboard RTC crystal, Support interrupt/ wakeup
LoRa
- Long Range Low Power LoRa Transceiver
- High sensitivity: -i48dBm
- Transceive rate: 300 kbps
- Optional Hardware
- Version: SX1278[433Mhz]
Display Details
- OLED: 0.96 inch
- Driver: SSD1306
NUCLEO-F446ZE – STMicroelectronics Development Board, STM32F446ZE MCU, On-Board Debugger, Arduino, ST Zio and Morpho Compatible
- Model: STMicroelectronics Development Board, STM32F446ZE MCU (NUCLEO-F446ZE)
- Voltage: 3.3 V and 7 – 12 V
- USB OTG or full-speed device with Micro-AB connector (depending on STM32 support)
- Crystal oscillator: 32.768 KHz
Official Texas Instruments LP-MSPM0G3519 LaunchPad™ Development Kit for 80MHz Arm® Cortex®-M0+ MCU
-
Based on MSPM0G3519 Arm® Cortex-M0+ MCU
-
On-board debug probe for programming, debugging & energy measurement
-
Includes 3 user buttons and 2 LEDs (1 RGB LED)
-
Access to 80+ I/O pins for expansion and prototyping
-
ADC & DAC low-pass filter placeholders for improved analog performance
-
External reference options available on the back of the board
-
Fully supported by TI software ecosystem (Code Composer Studio™, drivers, examples)
-
Ideal for IoT, sensor-based projects, industrial and low-power applications
Official EK-TM4C129EXL – ARM Cortex-M4F TM4C129E Connected LaunchPad Evaluation Kit
-
Based on ARM® Cortex-M4F TM4C129ENCPDT MCU
-
Features hardware crypto accelerators for secure data processing
-
Supports 10/100 Ethernet MAC + PHY for fast network connectivity
-
Includes USB 2.0 Host/Device/OTG support
-
Comes with on-board debugger and emulator
-
Integrated motion control PWM and hibernation module
-
Ideal for secure cloud communication using TLS/SSL (WolfSSL support)
-
Out-of-the-box demo connects securely to Exosite cloud
-
Runs on TI-RTOS for real-time embedded applications
-
Expansion via BoosterPack™ headers
-
Perfect for IoT, smart grid, industrial automation, and control systems
Official Silicon Labs XG22-EK2710A EFR32MG22E Explorer Kit (BRD2710A)
- Based on EFR32MG22E224F512IM40 2.4 GHz Wireless SoC
- +6 dBm, 512 kB Flash, 32 kB RAM, QFN48
- Two LEDs and two push buttons
- Reset button
- USB connector for power and debug connection
- On-board SEGGER J-Link debugger
- Virtual COM port
- Packet Trace Interface (PTI)
- Breakout pads for GPIO access and connection to external hardware
- Third-party add-on connectors
- mikroBUS™ socket
- Qwiic® connector
858D Hot Air Soldering Station with Display
- Body type: Full metalized Powdered coated.
- Controller: Micro Controller based with 7 segment display with SET and READ mode.
- ESD: Yes safe
- Temperature setting: Push-button
- Fan setting: Knob type
- Blower Cut-off: Automatic on keeping it in the provided cradle.
Official 7Semi SCD41 High Accuracy CO2, Temperature and Humidity Sensor Breakout I2C
- Photoacoustic CO2 sensor technology
- Integrated temperature and humidity sensor
- Measurement range: 400 ppm – 5000 ppm
- Accuracy: +-(50 ppm + 5 % of reading)
- Current consumption: 17 mA (meas. rate = 5 s) / 0.5 mA (meas. rate = 5 min)
- Fully calibrated and linearized
- I2C digital interface
NUCLEO-F411RE STM32 Nucleo-64, STM32F411RE MCU Development Board
- STM32 microcontroller in LQFP64 package
- 1 user LED shared with ARDUINO
- 1 user and 1 reset push-buttons
- 32.768 kHz crystal oscillator
