TTP223 Touch Button Module Self-Locking Inching Capacitive Switch
SKU:
SEN0186
Original price was: ₹36.00.₹12.00Current price is: ₹12.00. (Excl. 18% GST)
- Input Voltage : 2 Volt – 5.5 Volts DC.
- The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V.
- Sensitivity can adjust by the capacitance(0~50pF).
- Stable touching detection of the human body for replacing traditional direct switch key.
- Provides direct mode toggle mode by pad option(TOG pin).
- After power-on have about 0.5sec stable-time, during the time do not touch the keypad, and the function is disabled.
- Auto calibration and Re-calibration period is about 4.0 sec when the key has not be touched.
TTP224 4-way Capacitive Touch Switch Module
SKU:
SEN0183
Original price was: ₹119.00.₹55.00Current price is: ₹55.00. (Excl. 18% GST)
- Onboard TTP224 capacitive touch sensor IC 4 keys
- 4 board-level status indicator
- Working voltage: 2.4V-5.5V
- Advanced Pins breakout, so that the output mode and working mode selectable.
- Low power selection
TTP226 8-way Capacitive Touch Switch Module
SKU:
SEN0184
Original price was: ₹176.79.₹96.00Current price is: ₹96.00. (Excl. 18% GST)
- Onboard 8 key TTP226 capacitive touch induction IC.
- Onboard 8-way level indicator.
- Working voltage: 2.4 to 5.5 V.
- Modules, you can set the output mode, key output mode, the longest time and fast/low power output
TTP229 16-way Capacitive Touch Switch Module
SKU:
SEN0185
Original price was: ₹164.34.₹100.00Current price is: ₹100.00. (Excl. 18% GST)
- Working voltage: 2.4V to 5.5V
- Built-in regulator
- Two modes
- Simple 8 key mode with independent 8 Channel parallel output.
- Advanced 16 Key modes with I2C interface output.
- Modes can be selected and configured by the user.
- Adjustable sensitivity
ULN2003 Driver Board Stepper Motor-Blue
SKU:
COMP0027
Original price was: ₹210.00.₹43.00Current price is: ₹43.00. (Excl. 18% GST)
- 5-12V power supply
- 4-way signal indicator
- Chip all the pins have Input leads Mounted for easy connection to use
- XH-5P socket can be connected directly 28BYJ-48 Model stepper motor
- Dimensions: 32 x 18 x 11mm (LxWxH)
- Weight: 3 gm
ULN2003 Driver Board Stepper Motor-Green
SKU:
COMP0028
Original price was: ₹199.00.₹40.00Current price is: ₹40.00. (Excl. 18% GST)
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
Ultrasonic Distance Measurement Control Board Rangefinder Digital Display for HC- SR04
SKU:
SEN0049
Original price was: ₹449.00.₹203.00Current price is: ₹203.00. (Excl. 18% GST)
- Onboard STM8S103 high-performance microprocessor
- With digital tube display
- Valid Measurement Distance: 3-400cm
- Display Unit: cm
- Maximum Input Voltage: 5VDC
- 2.54mm White Socket: 5V power interface.
UNO R3 SMD ATMega328P CH340 Arduino Compatible Development Board
SKU:
DEV0023
Original price was: ₹520.41.₹202.54Current price is: ₹202.54. (Excl. 18% GST)
- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
Unsoldered Black STM32F401CCU6 Development Board (Micro USB)
SKU:
DEV0048
Original price was: ₹590.82.₹279.00Current price is: ₹279.00. (Excl. 18% GST)
- 100% Original brand new and high-quality STM32 Board
- 84 MHz work frequency.
- 256K flash memory,64K SRAM.
- 1.7-3.6V power, I/O.
- 4-26MHz crystal.
- Onboard the Type-C USB interface, you can give the board power supply and USB communication.
Unsoldered Black STM32F401CCU6 Development Board (Type C)
SKU:
DEV0050
Original price was: ₹590.82.₹279.00Current price is: ₹279.00. (Excl. 18% GST)
- Model: STM32F401CCU6
- Memories: Up to 256 Kbytes of Flash memory, 512 bytes of OTP memory, Up to 64 Kbytes of SRAM
- 1× 12-bit, 2.4 MSPS A/D converter: Up to 16 channels
- General-purpose DMA: 16-stream DMA controllers with FIFOs and burst support
- 256 Kbytes of Flash memory
- 84 MHz CPU with ART Accelerator
- Item Type: Other Board
- Based On: STM32
- USB Connector: Type-C
- Product Size: 53x21x8mm
- Weight (g): 7
Unsoldered ESP32-S3 WiFi Bluetooth compatible BLE 5.0 Mesh Development Board N16R8
SKU:
DEV0016
Original price was: ₹1,999.00.₹1,016.00Current price is: ₹1,016.00. (Excl. 18% GST)
- Chip: ESP32-S3
- Flash: 16 MB
- PSRAM: 8 MB
- Dimensions: Approx. 63.5mm x 28.5 mm
- Logic Level Voltage: 3.3V
Unsoldered ESP32-S3 WiFi Bluetooth compatible BLE 5.0 Mesh Development Board N8R2
SKU:
DEV0015
Original price was: ₹1,678.00.₹1,200.00Current price is: ₹1,200.00. (Excl. 18% GST)
- Manufacturer Part No: ESP32-S3-DevKitC-1-N8
- Manufacturer: Espressif Systems
- Product Type: WiFi Development Tools – 802.11
- Product: Development Kits
- Tool Is For Evaluation Of ESP32-S3-WROOM-1
- Protocol Supported: 802.11 b/g/n
- Frequency: 2.4 GHz
- Operating Supply Voltage: 3.3V ~ 5V
- Protocol – WiFi – 802.11: WiFi
- Interface Type: GPIO, UART, USB
Unsoldered GY-9255 9DOF MPU9255 9-Axis Attitude +Gyro+Accelerator+Magnetometer Sensor Module
SKU:
SEN0140
Original price was: ₹799.00.₹550.00Current price is: ₹550.00. (Excl. 18% GST)
- Accelerometer, Gyroscope, and Magnetometer
- Power Supply: DC3.3V-5V
- Chip: MPU9255
- Size: 22 mm x 17 mm.
- Gyro range : ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- Magnetic field range: ± 4800uT
- 9 DOF modules
US-100 Ultrasonic Sensor Distance Measuring Module with Temperature Compensation
SKU:
SEN0043
Original price was: ₹399.00.₹199.00Current price is: ₹199.00. (Excl. 18% GST)
- Voltage: DC 2.4V – 5V
- Average Current Consumption: < 2mA
- Output mode: level or UART
- Detection distance: 2cm – 450cm
- Working temperature: -20°C to +70°C
- It features temperature compensation.
- Provides two output modes level or UART.
USB 2.0 A-A Male Cable 0.3m
SKU:
CAB0005
Original price was: ₹64.74.₹41.00Current price is: ₹41.00. (Excl. 18% GST)
- Color : Blue
- Length (cm) : 30
- USB Type : Type-A to Type-B
- Weight (gm) : 20
USB 2.0 A-B Male Printer Cable 0.3m
SKU:
CAB0002
Original price was: ₹69.00.₹35.00Current price is: ₹35.00. (Excl. 18% GST)
- USB type: A-B
- Cable length: 30 cm
- Color: Blue
- Good quality
USB 2.0 A-B Male Printer Cable 0.5m
SKU:
CAB0001
Original price was: ₹69.00.₹35.00Current price is: ₹35.00. (Excl. 18% GST)
- USB type: A-B
- Cable length: 50 cm
- Color: Blue
- Good quality
USB 2.0 A-B Male Printer Cable 1.8m
SKU:
CAB0004
Original price was: ₹89.64.₹50.00Current price is: ₹50.00. (Excl. 18% GST)
- Color : Blue
- Length (cm) : 100
- USB Type : Type-A to Type-B
- Weight (gm) : 25
USB 2.0 A-B Male Printer Cable 1m
SKU:
CAB0003
Original price was: ₹89.64.₹50.00Current price is: ₹50.00. (Excl. 18% GST)
- Color : Blue
- Length (cm) : 100
- USB Type : Type-A to Type-B
- Weight (gm) : 25
USB ASP AVR Programmer for ATMEL Processors
SKU:
PRO0003
Original price was: ₹334.00.₹205.00Current price is: ₹205.00. (Excl. 18% GST)
The USB ASP AVR Programming Device for ATMEL processors is a USB in-circuit programmer for Atmel AVR controllers. This ATMEL Processors simply consists of an ATMega88 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver; no special USB controller is needed.
