Official NUCLEO-C051C8 STM32C051C8 Nucleo-64 STM32C0 ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board
- STM32C051C8 MCU – ARM Cortex-M0+ with 64KB Flash.
- On-board ST-LINK – Built-in USB debugger/programmer.
- ARDUINO & ST morpho support – Easy hardware expansion.
- USB or external power – Flexible power supply options.
- STM32Cube & IDE support – Ready-to-use software and tools.
STMicroelectronics NUCLEO-N657X0-Q STM32 Nucleo-144 Development Board
- Brand: STMicroelectronics
- Type: MCU 32-Bit
- Core Processor: ARM Cortex-M55
- Mounting Type: Fixed
- Interconnect System: Arduino R3 Shield, ST Morpho, ST Zio
STM8S105K4T6 Development Board
- 100% Brand new and high-quality STM8 Board
- Model: STM8S105K4T6.
- Core: ARM 8 Cortex CPU.
- 16MHz work frequency.
- 32K flash memory, 2K SRAM.
ESP32-C3 Development Board Dual Type-C WiFi Bluetooth BLE5.0 DevKitM-1 Core Board ESP32C3 Module
- Bluetooth LE: Bluetooth 5 Bluetooth
- mesh High power mode(18 dBm)
- Rate support 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
- Advertising Extensions
NUCLEO-F446ZE – STMicroelectronics Development Board, STM32F446ZE MCU, On-Board Debugger, Arduino, ST Zio and Morpho Compatible
- Model: STMicroelectronics Development Board, STM32F446ZE MCU (NUCLEO-F446ZE)
- Voltage: 3.3 V and 7 – 12 V
- USB OTG or full-speed device with Micro-AB connector (depending on STM32 support)
- Crystal oscillator: 32.768 KHz
STM32F411CEU6 Minimum System Board – Black Pill Board (Cortex-M4)
- 100% Brand new and high-quality STM32 Board
- Model: STM32F411CEU6
- Black Pill Board
- Core: ARM 32 Cortex-M4 CPU
- Debug mode: SWD
- 512K flash memory, 128K SRAM
- Reset(POR/PDR)
- 4-26MHz crystal
- 72MHz work frequency.
Unsoldered Black STM32F401CCU6 Development Board (Type C)
- Model: STM32F401CCU6
- Memories: Up to 256 Kbytes of Flash memory, 512 bytes of OTP memory, Up to 64 Kbytes of SRAM
- 1× 12-bit, 2.4 MSPS A/D converter: Up to 16 channels
- General-purpose DMA: 16-stream DMA controllers with FIFOs and burst support
- 256 Kbytes of Flash memory
- 84 MHz CPU with ART Accelerator
- Item Type: Other Board
- Based On: STM32
- USB Connector: Type-C
- Product Size: 53x21x8mm
- Weight (g): 7
LAUNCHXL-F280049C – C2000 Piccolo MCU F280049C LaunchPad Development Kit
- TMS320F280049C: 100 MHz C28x CPU with FPU and TMU, 256 KB Flash, InstaSPIN-FOC enabled, 3x 12-bit ADC, CAN, encoder, FSI, UART, and more
- On-board XDS110 debug probe for real-time debug and flash programming
- 80 pin LaunchPad leveraging the BoosterPack ecosystem
- Power domain isolation for real-time debug and flash programming
- Isolated CAN transceiver
- Two encoder interface connectors
- FSI interface connector
- Hardware Files are in C2000Ware at boards\LaunchPads\LAUNCHXL_F280049C
Unsoldered Black STM32F401CCU6 Development Board (Micro USB)
- 100% Original brand new and high-quality STM32 Board
- 84 MHz work frequency.
- 256K flash memory,64K SRAM.
- 1.7-3.6V power, I/O.
- 4-26MHz crystal.
- Onboard the Type-C USB interface, you can give the board power supply and USB communication.
X-NUCLEO-IHM03A1 PowerSTEP01 STMicroelectronics Stepper Motor Driver for STM32 Nucleo Board
- Voltage range from 10.5 V to 85 V
- Phase current up to 10 A rms
- Power OK and fault LEDs
- Up to 1/128 micro-stepping
- Programmable speed profile and overcurrent protection
- Sensorless stall detection
- Adjustable output slew rate
- Overtemperature protection
- Compatible with Arduino UNO R3 connector
- Compatible with STM32 Nucleo boards
- Suitable for multi-motor solution
- RoHS compliant
NUCLEO-F767ZI – STM32 Nucleo-144 Development Board with STM32F767ZI MCU, supports Arduino, ST Zio and morpho connect
1. 100% Brand new and high quality STM32 Board
2. Model: STM32F767ZI
3. Core: ARM Cortex-M7 MCU
4. up to 216 MHz clock speed
5. 2 MB Flash, and 512 KB RAM
6. Operating voltage of 3.3 V and temperature range of -40°C to +85°C.
STM32F407VET6 Development Board, Minimal System Learning Board, Cortex M4 STM32, ARM Core Board
- 100% Brand new and high-quality STM32 Board
- Model: STM32F407VET6
- Core: ARM 32 Cortex-M4 CPU.
- Debug mode: SWD.
WiFi and Bluetooth Esp32 4MB Flash D1 R32 CH340G Development Board Micro USB
- Microcontroller: ESP32
- Flash Memory: 4MB
- Wireless Connectivity: WiFi and Bluetooth
- USB-to-Serial Converter: CH340G
STMicroelectronics STM32F429I-DISC1 Discovery MCU Development Kit with STM32F429ZI MCU, 2.4″ Qvga LCD 3-axis Mems Motion Sensor
-
Microcontroller: STM32F429ZIT6 (ARM® Cortex®-M4, 180 MHz, 2 MB Flash, 256 KB SRAM)
-
Integrated Debugger: ST-LINK/V2 embedded debug tool – no external programmer needed
-
Display: 2.4″ QVGA TFT LCD for graphical applications
-
Memory: 64 Mbit external SDRAM for memory-intensive projects
-
Sensors: ST MEMS gyroscope for motion detection and orientation sensing
-
USB Connectivity: USB OTG micro-AB connector (host & device support)
-
User Interface: Multiple LEDs and pushbuttons for quick prototyping
-
I/O Access: Easy access to MCU pins for hardware expansion
-
Software Support: Compatible with STM32Cube firmware, middleware, and examples
-
Applications: IoT devices, industrial controllers, multimedia systems, robotics, and embedded projects
STMICROELECTRONICS STM32F0 DISCOVERY Evaluation Kit, STM32F0 MCU, On-Board ST-LINK/V2 Debugger/Programmer
- Product: STM32F0 DISCOVERY Evaluation Kit
- Processor: STM32F051R8T6
- RAM: 8KB
- Power Supply: 3V and 5V
- Flash Memory: 64KB Flash
STM32F407G-DISC1 Discovery Board with STM32F407VG MCU – MB997D
-
STM32F407VGT6 featuring 32-bit ARM Cortex -M4 with FPU core, 1-Mbyte Flash, 192-Kbyte RAM
-
On-board ST-LINK/V2 on STM32F407G-DISC1
-
USB ST-LINK with re-enumeration capability and three different interfaces:
-
Debug port
-
Virtual Com port
-
Mass storage
-
-
Board power supply: through USB bus or from an external 5 V supply voltage
Bluetooth 4.0 NRF51822 Evaluation Kit
- 2.4 GHz multiprotocol RF transceiver
- ARM Cortex-M0 32 bit processor
- 128 bit AES HW encryption
- 256kB flash & 32kB RAM
- Programmable Peripheral Interconnect (PPI)
- 10 bit ADC
STM32F030F4P6 core board development board core ARM CORTEX-M0
- Input Voltage: 3.3 V
- Output Voltage: 5-3.3 V
- CPU ARCHITECTURE: RM CORTEX-M0
- MICROPROCESSOR MODEL: STM32F030F4P6
- Dimensions: 48 x 30 x 8 (LxWxH) mm.
- Weight: 7 gm.
Core Board STM8S103F3P6 STM8 Development Board Minimum System Board
- Chipboard STM32F103C8T6
- On board, SWIM interface and reset button
- Micro USB line or the 2.54 pin to link to the power with the input voltage 4.5V-15V.
- Power light and the Demo indicator light
- Leads all the pins and has detailed label for the Pins.
- Support SWIM debug mode.
AI-01 Small Intelligent AI Voice Dialogue Module Kit with ESP32 Development Board Including Microphone and Speaker
- Supports up to 50 offline voice commands
- Built-in ESP32-C2 WiFi chip with RISC-V core
- Integrates with large language models
- Expandable via rich hardware interfaces
- Includes mic, speaker, and pin headers
- Ideal for IoT, automation, and AI prototyping
