ACEBOTT ESP8266 Quadruped Bionic Spider Robot – QD020
- Product type – Programmable Robot Kit
- Brand – ACEBOTT
- Model – QD020
- Robot type – Quadruped Bionic Spider Robot
- Microcontroller – ESP8266
- Programming language – C/C++
- Development platform – Arduino IDE
- Connectivity – WiFi
- Mounting type – Programmable Development Kit
- Application – STEM Education, Robotics and Electronic Projects
ZK-4KX DC Step Up and Step Down Adjustable Voltage Regulator with Dual Display (DC DC Buck Boost Converter CC CV 0.5-30V 4A Adjustable)
- Model: ZK-4KX
- Material: Fiber glass board, Electronic component
- Input Voltage: 5.0-30v
- Output Voltage: 0.5-30v
- Voltage Display resolution: 0.01V
- Current Display resolution: 0.001A
- Conversion Efficiency: about 88%
- Output Power: Natural heat dissipation 35W; Strengthen heat dissipation 50W
- Output Current: It can work stably at 3A for a long time, and can reach 4A under enhanced heat dissipation.
- Soft Start: Yes (The soft start may fail when it starts with high power and load module.)
LAUNCHXL-F2800157 – C2000 MCU F2800157 LaunchPad Development Kit
- Microcontroller: TMS320F2800157
- Clock Speed: 120 MHz
- Debugger: XDS110 Onboard
- Connectivity: USB, GPIO, BoosterPack headers
- Operating Voltage: 3.3V / 5V compatible
Easy-Plug ACEBOTT Smart Home Education Kit – Level 1 (3 in 1 Projects) – QE023
- Brand : ACEBOTT
- Model Number : QE023
- Mounting Type : ESP32 Intelligent Transport Kit for arduino
- Microprocessor : ESP8266
ACEBOTT Bionic Biped Robot Kit for Arduino ESP32 – QD021
- Brand Name : ACEBOTT
- Model Number : QD021
- Category : STEAM & STEM Kit, STEAM & STEM Toy, Robot Kit
- Type : Bionic Biped Robot Kit
- Recommended Age : For Age 12+ & Makers
- Application : Scientific & Educational Toys, Home STEAM & STEM Education, Classroom STEAM & STEM Education
- Controller Boards : ESP32
- Programming Arduino, ACECode
USB ASP AVR Programmer for ATMEL Processors
The USB ASP AVR Programming Device for ATMEL processors is a USB in-circuit programmer for Atmel AVR controllers. This ATMEL Processors simply consists of an ATMega88 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver; no special USB controller is needed.
1×40 Pin Right Angle Pin Header 2.54mm
- Single row.
- 2.54mm pitch.
- 1 x 40 pins.
- Through-hole mount.
- 17mm pin length.
ACEBOTT Intelligent Transport Education Kit – Level 1 (XH2.54) – QE027
- Brand Name: ACEBOTT
- Model Number: QE027
- Mounting Type: ESP32 Intelligent Transport Kit for Arduino
- It is a “4 in 1” learning kit, this kit only has one controller board, so Users can assemble one of these 4 projects at each time.
Mini 4-Channel Motor Drive Shield Expansion Board L293D Module High Voltage Current Module for R3 MEGA 2560 MEGA2560
- New L293D motor shield, the input voltage DC4.5-25V
- 600mA output current capability per channel
- 1.2A peak output current(non-repetitive) per channel
- Enable facility
- Overtemperature protection
- Logical “0” input voltage up to 1.5V(High noise immunity)
AS608 Fingerprint Reader Sensor Module Optical Fingerprint Fingerprint Module
- Resolution: 500dpi
- Supply current: <60mA
- Supply voltage: 3.3V
- Fingerprint image entry time: <1.0 seconds
- Peak current: <60mA
NUCLEO-U083RC STM32U083RC MCU STM32 Nucleo-64 Development Board
- Targeted STM32U083RCT6 ultra-low-power Arm Cortex-M0+ MCU in LQFP64 package
- USB Type-C® connector
- Cryptography
- 1 user LED shared with ARDUINO, 1 user and 1 reset push-buttons
- 32.768KHz crystal oscillator
- Flexible power-supply options: ST-LINK USB VBUS or external sources
Official 7Semi DC-DC Buck Converter 5V 3A Out – MP2338
-
5V Regulated DC Output
-
Up to 3A Output Current
-
Based on MP2338 Buck Regulator IC
-
Input Voltage up to ~24V
-
High Efficiency Switching Design
-
Thermal Shutdown Protection
-
Cycle-by-Cycle Current Limiting
-
Compact Breakout Board
-
Easy Breadboard & PCB Integration
-
Ideal for Microcontrollers & Sensors
Official 7Semi DS18B20 Digital Waterproof Temperature Sensor Probe 3M Cable
-
7Semi DS18B20 digital waterproof temperature sensor probe
-
3-meter insulated cable for flexible installation
-
Measures temperature from −55°C to +125°C
-
±0.5°C accuracy for precise monitoring
-
1-Wire digital interface for easy integration
-
Compatible with Arduino, Raspberry Pi, ESP8266, ESP32
-
Stainless steel probe for durability and corrosion resistance
-
Suitable for liquids, outdoor, HVAC, and industrial use
ULN2003 Driver Board Stepper Motor-Blue
- 5-12V power supply
- 4-way signal indicator
- Chip all the pins have Input leads Mounted for easy connection to use
- XH-5P socket can be connected directly 28BYJ-48 Model stepper motor
- Dimensions: 32 x 18 x 11mm (LxWxH)
- Weight: 3 gm
Texas Instruments LAUNCHXL2-RM57L Hercules RM57Lx/RM57L843 LaunchPad Development Kit
- Microcontroller: RM57L843
- USB powered and capability for external 5v supply
- On board USB XDS_ICDIc2 JTAG debug
- IEEE 1588 precision time Ethernet PHY DP83630
- On board SCI to PC serial communication
- User programmable push buttons
- Reset switches
- LEDs and Analog input
WCS1700 Hall Current Sensor with Over Current Protection
- Working voltage: DC-DC 5V
- Pass-Through Wire Diameter: 9mm
- Output Current Sink: 0.4mA
- the current detection resolution of 32mV / A
- output overcurrent signal indication
Official 7Semi DS18B20 Waterproof Temperature Sensor Probe 1m Cable
-
Temperature threshold programmable and non-volatile
-
Sensor type local
-
Single measurement channel
-
Supports parasite power
-
1-Wire communication interface
-
Accuracy ±0.5°C
-
Supports multiple devices on the same bus
-
Temperature resolution selectable 9, 10, 11, or 12 bits
-
Operating temperature range from −55°C to +125°C
ST Link V2 Programmer For STM8 and STM32 (Random Colour)
- PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable!
- Interface definition directly marked on the shell, clear, convenient and practical!
- 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V
ACEBOTT Smart Factory Education Kit – Level 1 (XH2.54) – QE031
- Build robotic arms, production lines, and warehouses
- 10+ hands-on STEAM projects
- Durable wooden parts
- 6-year progressive learning path
- Interactive map for project display
2WD Smart Robot Car Chassis
- Smart car chassis tracing car Robot car chassis with code disk, Ideal for DIY.
- This car is the tachometer encoder.
- With a 4 AA battery box (batteries not included).
- It can be used for distance measurement, velocity.
- Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing,
- Wireless remote control.
- Size: 21 x 15 cm (L x W).
- Wheel size: 6.5 x 2.7cm (Dia. x H).
