NEO-6M GPS Module with EEPROM for Aero Quad with Antenna for Flight Control GY-NEO6MV2 (with Battery)
- 5Hz position update rate
- Operating temperature range: -40 TO 85°CUART TTL socket
- EEPROM to save configuration settings
- Rechargeable battery for Backup
- The cold start time of 38 s and Hot start time of 1 s
- Supply voltage: 3.3 V
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600)
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
- Separated 18X18mm GPS antenna
3.7V 500mAH (Lithium Polymer) Lipo Rechargeable Battery (Model – YXL-551145P)
- Battery Model: KP-551145
- Material: Lithium Polymer
- Battery Type: KP-600938 Rechargeable Power Battery
- Voltage: 3.7V
- Capacity: 450 mAh
- No memory effect
- Environmentally friendly
9V HW Battery Connector for DIY Projects and Electronics (10cm Cable)
- Made of hard leather.
- Excellent material, fine workmanship.
- It is an environmental 9V battery buckle.
- Wire Length: 15cm.
- Color: Black.
1x40pin Straight Pin Header 2.54mm
- Single row.
- 2.54mm pitch.
- 1 x 40 pins.
- Through-hole mount.
- 17mm pin length.
Official Texas Instruments LP-MSPM0G3519 LaunchPad™ Development Kit for 80MHz Arm® Cortex®-M0+ MCU
-
Based on MSPM0G3519 Arm® Cortex-M0+ MCU
-
On-board debug probe for programming, debugging & energy measurement
-
Includes 3 user buttons and 2 LEDs (1 RGB LED)
-
Access to 80+ I/O pins for expansion and prototyping
-
ADC & DAC low-pass filter placeholders for improved analog performance
-
External reference options available on the back of the board
-
Fully supported by TI software ecosystem (Code Composer Studio™, drivers, examples)
-
Ideal for IoT, sensor-based projects, industrial and low-power applications
ECG/EKG/EMG Wire
- Cord length: 40 cm.
- 3-lead line: buckle
1x40pin Female header 2.54mm
- Connector Type: Female header with 1 row of 40 pins
- Pin Pitch: 2.54mm (0.1 inches)
- Pin Configuration: 1×40 configuration, meaning a single row of 40 pins
- Mounting angle: Straight needle
- Color: Black
Official 7Semi TPS61023 3.7A 5V Out Mini Boost Converter
-
5V Fixed Output Boost Converter
-
Up to 3.7A Output Current
-
Wide Input Voltage: 1.5V–5.5V
-
Based on TI TPS61023 IC
-
High Efficiency up to 94%
-
1 MHz Switching Frequency
-
Compact Mini Breakout Board
-
Built-In Overvoltage Protection
-
Thermal Shutdown & Short-Circuit Protection
-
Ideal for Battery & Portable Applications
IIC I2C Logic Level Converter Bi-Directional Module 5V to 3.3V for Arduino
- Number of Channels- 4
- Voltage on Lx Side- 1.8V-5V
- Voltage on Hx Side- 2.8V-6V
- Power- 2.8V 6V
- Length (mm)- 16
- Width (mm-) 13
- Height (mm- 3
- Weight (gm)- 2
W25Q128 Storage Module 128Mbit Flash SPI Interface
- Using serial Nor flash external expansion memory chip W25Q128.
- Operating Voltage: 2.7-3.6V
- Support the SPI interface.
- Capacity: 128M-bit / 16M-byte
- Clock Frequency: ≤ 104MHz
MPU-6050 3-Axis Accelerometer and Gyro Sensor
- Chip built-in 16bit AD converter, 16-bit data output
- Driver Chip: MPU6050
- Operating Voltage: 3-5V DC
- Communication: I2C/IIC Protocol
- Gyro Range: ± 250, 500, 1000, 2000 °/s
- Accelerometer Range: ± 2 ± 4 ± 8 ± 16 g
GY-53 VL53L0X Laser ToF Flight Time Ranging Sensor Module (High Quality)
- VL53L0X 3-in-1 ranging and gesture detection sensor
- Regulator: 5 to 2.8V range input voltage (output voltage: 2.8V)
- VL53L0X signal interface level shifter
- Serial Port PWM Output
- True distance measurement independent of target size and reflectance
- Breakout board, easy to integrate into the customer device
- Allows basic gesture recognition use case.
MAX6675 Thermocouple Sensor Module
- High impedance differential inputs.
- Thermocouple break detection.
- 2000V of ESD signal.
- Embedded thermocouple break detection circuitry.
- Compatible with K-type temperature probe
- Simple SPI serial output temperature.
MC-38 Wired Door Window Sensor Magnetic Switch Home Alarm System
- Model: MC38
- Material: Plastic
- Color: White
- Voltage: 100V
- Contact Capacity: (Max. Switch Current) 0.5A
- Rated Power: 10W
- Actuation Distance: 15 ~ 25mm
- Connecting cable length: 30cm
Tactile Push Button Switch 6x6x5mm 4pin
- Ideal for Through-hole applications.
- Shaft Shape: Round
- Used in the fields of electronic products, household appliances and more.
-
This light touch switch is waterproof, prevent oil, anti-pollution, anti-static interference.
-
High precision mechanism design offers acute operation and long service life.
-
Compact and lightweight, easy to carry and dismantling.
-
Good electrical conductivity.
0.96 Inch I2C/IIC 4-Pin OLED Display Module (WHITE)
- Size: 0.96 inch
- Resolution: 128 x 64
- Controlling Chip: SSD1306
- Display Area: 21.74 x 10.86mm
- Driving Voltage: 3.3-5V
- Operating Temperature: -40~70 celsius
- Interface Type: IIC
- Light Color: White
NUCLEO-G0B1RE STM32G0B1RE MCU Nucleo-64 Development Board
- Versatile Microcontroller: Powered by the STM32G0B1RE MCU in LQFP64 package, perfect for diverse applications.
- Efficient Power Management: Options for external or internal SMPS to optimize power consumption during operation.
- Seamless Connectivity: ARDUINO Uno V3 expansion and ST morpho headers for easy integration with a wide range of shields and modules.
- Comprehensive Software Support: Access to free software libraries and examples through the STM32Cube MCU Package, with support for various IDEs like IAR Embedded Workbench, MDK-ARM, and STM32CubeIDE.
- Integrated Debugging Tools: Built-in ST-LINK debugger/programmer, eliminating the need for external probes.
HC-42 Bluetooth Module 5.0BLE Serial Port Module (6-Pin)
- Part Number: HC-42D
- Version: BLE 5.0
- Frequency Band: 2.4G
- Air Rate: 1Mbps/2Mbps
- Working Voltage: 1.8~3.6V
- Antenna: PCB internal antenna
Male to Male Dupont Line 40 Pin 20cm 24AWG
- 40P colored jumper wires
- Length: 200mm
- Weight: 30 gm
- Compatible with 2.54mm spacing pin headers
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
Male to Female Dupont Line 40 Pin 20cm 24AWG
- 40P colored jumper wires
- Length: 200mm
- Weight: 30 gm
- Compatible with 2.54mm spacing pin headers
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
