NUCLEO-F446ZE – STMicroelectronics Development Board, STM32F446ZE MCU, On-Board Debugger, Arduino, ST Zio and Morpho Compatible
- Model: STMicroelectronics Development Board, STM32F446ZE MCU (NUCLEO-F446ZE)
- Voltage: 3.3 V and 7 – 12 V
- USB OTG or full-speed device with Micro-AB connector (depending on STM32 support)
- Crystal oscillator: 32.768 KHz
DIY Mini Cat Tracking Robot in Paper Box (without battery)
Operating Voltage: 3V
Easy to install
Comes with a Stepwise User manual
Texas Instruments LAUNCHXL-F28P65X C2000 Real-Time MCU F28P65x LaunchPad Development Kit
- On-board XDS110 debug probe for real-time debug and flash programming
- 80-pin LaunchPad leveraging the BoosterPack ecosystem
- Power domain isolation for real-time debug and flash programming
- On-board CAN transceiver and connector
- EtherCAT PHYs and RJ45 connectors
- Two encoder interface (eQEP) connectors
MAX7219 8×8 LED Dot Matrix Module with cable (Red)
- Driver Chip: MAX7219
- Input Voltage: 4-5.5V
- Input Current 330mA
- Requires only 3 communication wires of MCU
- A single module can drive an 8 * 8 common cathode LED
- Connecting wires included
- Easy to interface with variety of MCU platforms
- SPI based control
KY-003 Hall Magnetic Sensor Module
- Model: KY-003
- Working voltage: DC 5V
- Small size, high sensitivity, fast response speed, good temperature performance, high accuracy and high reliability
- Automobile ignite, Brake circuit, Detection and control of position and speed
Official 7Semi ST-LINK V2/V2.1 USB-C Debugger Programmer for STM32 MCUs
- Supports 1.65 V to 5.5 V on the SWIM interface and 1.65 V to 3.6 V on the JTAG/SWD interface.
- USB 2.0 full-speed compatible interface for seamless connection with modern computers.
- SWIM cable supports both ERNI connectors and pin headers.
- 5V power supplied via a USB connector.
- Supports JTAG/SWD and SWV (Serial Wire Viewer) communication.
- Operating temperature: 0C to 50C.
- 1000 Vrms high isolation voltage for ST-LINK/V2-ISOL variant
RTC DS1307 24C32 Real Time Clock Module without CR2032 Battery
- Two-wire I2C interface.
- Hour: Minutes: Seconds AM/PM.
- Day Month, Date – Year.
- DS1307 based RTC (Battery include).
- 1Hz output pin.
- Available in 8-pin DIP or SOIC
LED Scroller Matrix keyboard
- Switch Type: Momentary
- Pin Spacing (mm): 2.54
- Module Dimensions (L x W x H): 57 x 33 x 6
- Weight: 10gm
- 4×4 Matrix Keyboard Module with 16 buttons
Texas Instruments MSP-EXP430FR5969 MSP430FR5969 LaunchPad Development Kit
- 64KB FRAM / 2KB SRAM
- 16-Bit RISC Architecture up to 8-MHz FRAM access/ 16MHz system clock speed
- 20 pin LaunchPad standard leveraging the BoosterPack ecosystem
- 0.1F SuperCap for standalone power
- Onboard eZ-FET emulation
- 2 buttons and 2 LEDs for User Interaction
Texas Instruments LAUNCHXL-F28379D – C2000 Delfino MCUs F28379D LaunchPad Development Kit
-
Low-cost development kit for TMS320F2837xD, F2837xS, and F2807x microcontrollers
-
Part of TI’s C2000™ MCU LaunchPad™ ecosystem
-
Supports connection of two BoosterPack™ plug-in modules
-
Features powerful dual-core ARM Cortex-M4F architecture
-
Integrated on-board USB JTAG emulator for programming and debugging
-
Ideal for real-time control, motor control, industrial automation, and power electronics
-
Enables rapid prototyping with standardized headers and expansion options
-
Compatible with Code Composer Studio and other TI tools
LAUNCHXL-F280049C – C2000 Piccolo MCU F280049C LaunchPad Development Kit
- TMS320F280049C: 100 MHz C28x CPU with FPU and TMU, 256 KB Flash, InstaSPIN-FOC enabled, 3x 12-bit ADC, CAN, encoder, FSI, UART, and more
- On-board XDS110 debug probe for real-time debug and flash programming
- 80 pin LaunchPad leveraging the BoosterPack ecosystem
- Power domain isolation for real-time debug and flash programming
- Isolated CAN transceiver
- Two encoder interface connectors
- FSI interface connector
- Hardware Files are in C2000Ware at boards\LaunchPads\LAUNCHXL_F280049C
Official TMDSHSECDOCK HSEC180 controlCARD baseboard docking station
-
Designed for HSEC180-based C2000™ controlCARDs
-
Header-pin access to all key MCU signals
-
Integrated breadboard area for custom prototyping
-
Supports USB or 5V barrel jack power input
-
Ideal for rapid development, testing, and debugging
-
Compatible with multiple TI controlCARD models
Official 7Semi ESP32 & ESP8266 Programmer USB-C, USB to UART Converter
-
Operating voltage 5V
-
Operating current 500mA
-
Communication and interface USB and UART
-
Dimensions 12.20 × 3.45 mm
-
Weight 3 gram
-
Operating temperature −40 to +85 °C
Official 7Semi DC-DC Buck Converter 7V -100V Input to 5V 1A Output – LM5164
-
Wide input voltage range: 6V to 100V
-
Stable 5V output with up to 1A current
-
Based on TI LM5164 high-voltage buck converter
-
Ultra-low EMI, CISPR 25 Class 5 compliant
-
Internal soft-start and thermal protection
-
Peak and valley current-limit protection
-
Adjustable switching frequency up to 1MHz
-
Ideal for industrial and battery-powered systems
GYGPSV1 NEO-M8N GPS Module, subsistute for NEO-6M GY- NEO8MV2 (with Battery）
- Antenna Size : approx. 26 x 26 x 9 (LxWxH) mm.
- Module Size : approx. 26 x 36 x 4 (LxWxH) mm.
- Net weight : approx. 16 gm.
- Gross weight : approx. 17 gm.
- Mounting : approx. 3 mm.
- The default baud rate : 9600.
- Flash memory: 64KB.
LAUNCHXL-F28069M Piccolo F28069 MCU, InstaSPIN-MOTION & InstaSPIN-FOC, Motor Control
-
Support for InstaSPIN-FOC and InstaSPIN-MOTION
-
USB-powered development environment
-
On-board JTAG emulator for easy debugging
-
Compatible with multiple TI BoosterPacks
-
Designed for sensorless field-oriented control of PMSM, ACIM, and BLDC motor
Official NUCLEO-8L152R8 Development Board, STM32 Nucleo-64, STM8L152R8 MCU Eval Board, On Board Debugger, Arduino Nano Extension, Reset Push Button
-
Microcontroller: STM8L152R8 MCU in LQFP64 package
-
Development Board Type: STM8 Nucleo-64
-
Connectivity: Arduino™ Uno V3 compatible and ST morpho headers
-
Power Efficiency: Low-power STM8 microcontroller suitable for energy-sensitive applications
-
Prototyping: Affordable and flexible platform for rapid development and experimentation
-
Expansion: Supports a wide range of shields, sensors, and modules for added functionality
-
Ease of Use: Open development platform with access to STM8 software libraries and firmware examples
-
Applications: Ideal for IoT devices, smart gadgets, educational projects, and embedded system prototyping
Texas Instruments LAUNCHXL2-570LC43 Hercules TMS570LC43x LaunchPad Development Kit
- USB powered and capability for external 5v supply
- On board USB XDS_ICDIc2 JTAG debug
- IEEE 1588 precision time Ethernet PHY DP83630
- On board SCI to PC serial communication
- User programmable push buttons
- Reset switches
- LEDs and Analog input
TM1638 Button Digital LED Display Module
- Use TM1638 digital tube drive chip to drive a common cathode LED digital tube.
- Can be extended to 3 * 8 buttons, led digital tube and can be controlled separately.
- Support 8 brightness control, led digital tube and use the same brightness.
- Support cascading up to 6 of the same module.
- 8 LED, 8-bit digital tube and 8 buttons, common cathode LED digital tube, such as STC microcontroller can be directly connected.
Official 7Semi STM32G030F6P6 Anchor STM32 Mini Development Board
-
ARM Cortex-M0+ core based on the STM32G030F6P6 microcontroller for efficient processing
-
USB-C type power supply for easy powering and reliable connectivity
-
Reset button for quick and convenient board reset during development and debugging
-
SWD interface supporting Serial Wire Debug for programming and debugging tasks
-
Basic circuitry included for standard operation of the STM32F030R8T6 chip
