GY- MAX4466 Sound Sensor Module
- Supply Voltage Operation: +2.4V to +5.5V.
- Versions with 5nA Complete Shutdown Available only (MAX4467/MAX4468).
- Excellent Power-Supply Rejection Ratio: 112dB.
- Excellent Common-Mode Rejection Ratio: 126dB.
- High AVOL: 125dB (RL = 100kΩ).
GY-169 INA169 High Precision Analog Current Sensor Module
- Model: GY-196
- Chip: INA169 (TI)
- Low Power Consumption
- High Precision
- Analog Output
- Operating Temperature: -40°C to +125°C
- Dimensions: 24*20(MM)
GY-21 HTU21 Sensor Module
- 2.1V to 3.6V Supply Voltage
- Low power consumption – 0.15uA typical
- I2C interface
- Resolution: 0.04%RH, 0.02°C
- Accuracy: ±2%RH, ±3°C
GY-291 ADXL345 digital three-axis acceleration of gravity tilt module IIC / SPI transmission
- Supply Voltage: 3.3 V/ 5V.
- Interface Type: I²C, SPI.
- Sensing Range: ±2g, ±4g, ±8g, ±16g.
- Sensitivity:
- X: 28.6 LSB/g.
- Y: 31.2 LSB/g.
- Z: 34.5 LSB/g.
- Ultra Low Power: 40µA in measurement mode, 0.1µA in standby@ 2.5V.
- Free-Fall Detection.
- Tap/Double Tap Detection.
GY-30 BH1750FVI Module Digital Light Intensity Illumination Sensor
- High precision determination accurate to 1 Lux for different lights
- Operating Voltage: 3-5VDC
- Built-in 16bit A/D converter
- I2C interface
GY-302 BH1750 Light Intensity Module
- High precision determination accurate to 1 Lu for different lights
- Operating Voltage: 3-5VDC
- Built-in 16bit A/D converter
- I2C interface
GY-31 TCS230 TCS3200 Color Sensor
- Model-nGY-31 TCS3200 TCS230
- Operating Voltage- 2.7 ~ 5.5 VDC
- Operating Current (mA)- 25mA @ 5V when LED is ON
- Operating Temperature- -45°C ~ 85°C
- Non-linearity Error- 0.2% at 50KHz typically
- Temperature Coefficient- 200 ppm/°C
GY-45 MMA8452 3-Axis Accelerator Module
- Operating Voltage: 3-5VDC
- 3 Axis Accelerometer Module
- Compatible With Arduino and Raspberry Pi
- Two Interrupt Pins
- Communication Via I2C Bus
GY-51 LSM303DLH module 3-axis magnetic field acceleration
- Model: GY-51 LSM303DLH
- 12 Bit A/D Converter
- 3-5VDC Power Supply
- I2C Communication Interface
- 16 Bit Data Output
GY-511 LSM303DLHC high- precision 3 Axis electronic compass acceleration sensor module
- Chip built-in 16-bit data output
- Operating Voltage: 3-5V DC
- Communication: I2C/IIC Protocol
- Accelerometer Range: ± 2 ± 4 ± 8 ± 16 g
- Magnetic Field Range:± 1.3 to ±8.1 gauss
GY-53 VL53L0X Laser ToF Flight Time Ranging Sensor Module (High Quality)
- VL53L0X 3-in-1 ranging and gesture detection sensor
- Regulator: 5 to 2.8V range input voltage (output voltage: 2.8V)
- VL53L0X signal interface level shifter
- Serial Port PWM Output
- True distance measurement independent of target size and reflectance
- Breakout board, easy to integrate into the customer device
- Allows basic gesture recognition use case.
GY-530 VL53LOX Laser ToF Flight Time Ranging Sensor Module (Low Cost)
-
Based on VL53L0X Time-of-Flight (ToF) laser ranging sensor
-
Measures distance up to 2 meters with 1 mm resolution
-
I²C interface for easy connection with Arduino, ESP32, STM32, Raspberry Pi
-
Works reliably across varied surfaces and lighting conditions
-
Compact design and low power consumption for embedded projects
-
Ideal for robotics, IoT devices, automation, and gesture recognition
-
Provides more accurate results than IR or ultrasonic sensors
-
Suitable for obstacle avoidance, 3D mapping, and object detection
GY-61 ADXL335 3-axis accelerometer tilt angle module
- Supply Voltage (V): 3 to 6
- Each Axis Bandwidth: 50Hz
- Operating Temperature (°C): -40 to +90
- Length (mm): 21
- Width (mm): 16
- Height (mm): 2.5
- Weight (gm): 0.6
GY-68 BMP180 Sensor Module
- 1.8V to 3.6V Supply Voltage
- Low power consumption – 0.5uA at 1Hz
- I2C interface
- Max I2C Speed: 3.5Mhz
- Very low noise – up to 0.02hPa (17cm)
- Fully calibrated
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
GY-9960- 3.3 APDS-9960 RGB Infrared Gesture Sensor Motion Direction Recognition Module
- Model: GY-APDS9960-3.3
- Chip: APDS-9960
- Power Supply: 3.3VDC
- Communication Through I2C Protocol
GY-BMP280-3.3 Precision Altimeter Atmospheric Pressure BMP280 Sensor Module
- Comes with the BME280 sensor.
- Pressure accuracy of ±1 hPa.
- Temperature accuracy ±1.0°C.
- Altimeter accuracy ±1 meter.
- Humidity: +-3%
GY-MAX30102 Pulse Oximeter Heart Rate Sensor Module
- Heart-Rate Monitor and Pulse Oximeter Biosensor in LED Reflective Solution
- Tiny 5.6mm x 3.3mm x 1.55mm 14-Pin Optical Module
- Integrated Cover Glass for Optimal, Robust Performance
- Ultra-Low Power Operation for Mobile Devices
- Programmable Sample Rate and LED Current for Power Savings
- Low-Power Heart-Rate Monitor (< 1mW)
- Ultra-Low Shutdown Current (0.7µA, typ)
- Fast Data Output Capability
- High Sample Rates
- Robust Motion Artifact Resilience
- High SNR
- -40°C to +85°C Operating Temperature Range
GYGPSV1 NEO-M8N GPS Module, subsistute for NEO-6M GY- NEO8MV2 (with Battery)
- Antenna Size : approx. 26 x 26 x 9 (LxWxH) mm.
- Module Size : approx. 26 x 36 x 4 (LxWxH) mm.
- Net weight : approx. 16 gm.
- Gross weight : approx. 17 gm.
- Mounting : approx. 3 mm.
- The default baud rate : 9600.
- Flash memory: 64KB.
Hall Sensor Module LM393 Linear Hall Effect
- 3144 hall sensor
- Features wide-range voltage comparator LM393
- Signal output indicator
- Analog / Digital output
HC-02 6pin Bluetooth Module Compatible with HC-05 / HC- 06
- Working Frequency: 2.4G
- Communication Interface: UA pin 3.3V TTL level
- Input Voltage: 3.2 ~ 6V
- Operating Voltage: 3.0 ~ 3.6V
- Communication Level: 3.3V
- Transmitted Power: 6dBm (max)
- Reference Distance: 10m
- Air Data Rate: 2Mbps
