Unsoldered ESP32-S3 WiFi Bluetooth compatible BLE 5.0 Mesh Development Board N8R2
SKU:
DEV0015
Original price was: ₹1,678.00.₹1,200.00Current price is: ₹1,200.00. (Excl. 18% GST)
- Manufacturer Part No: ESP32-S3-DevKitC-1-N8
- Manufacturer: Espressif Systems
- Product Type: WiFi Development Tools – 802.11
- Product: Development Kits
- Tool Is For Evaluation Of ESP32-S3-WROOM-1
- Protocol Supported: 802.11 b/g/n
- Frequency: 2.4 GHz
- Operating Supply Voltage: 3.3V ~ 5V
- Protocol – WiFi – 802.11: WiFi
- Interface Type: GPIO, UART, USB
MQ-2 Smoke Gas LPG Butane hydrogen Sensor Module
SKU:
SEN0052
Original price was: ₹208.00.₹82.00Current price is: ₹82.00. (Excl. 18% GST)
- Operating Voltage:+5V
- Preheat Duration:20 s
- Analog Output Voltage:0 to 5 V
- Dimension:36x20x21 mm
Official TMDS64EVM AM64x Evaluation Module for Sitara™ Processors
SKU:
DEV0116
Original price was: ₹49,999.00.₹36,999.00Current price is: ₹36,999.00. (Excl. 18% GST)
-
Official TI evaluation module for AM64x Sitara™ processors
-
Supports industrial, networking, and real-time control applications
-
Features multi-core Arm® Cortex® processors for high performance
-
Multiple connectivity options – Ethernet, USB, Serial, and more
-
On-board debug and expansion interfaces for rapid prototyping
-
Compatible with TI development tools and SDKs
-
Ideal for embedded system designers, engineers, and developers
USB 2.0 A-B Male Printer Cable 1m
SKU:
CAB0003
Original price was: ₹89.64.₹50.00Current price is: ₹50.00. (Excl. 18% GST)
- Color : Blue
- Length (cm) : 100
- USB Type : Type-A to Type-B
- Weight (gm) : 25
Male to Female Dupont Line 40 Pin 20cm 24AWG
SKU:
CAB0010
Original price was: ₹69.72.₹39.00Current price is: ₹39.00. (Excl. 18% GST)
- 40P colored jumper wires
- Length: 200mm
- Weight: 30 gm
- Compatible with 2.54mm spacing pin headers
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
High Quality Full Amperes 12V 1A EU Plug Adapte0
SKU:
POW0001
Original price was: ₹249.00.₹120.00Current price is: ₹120.00. (Excl. 18% GST)
- This is a durable product with a 6-month warranty.
- The adapter is easy to use.
- It comes with a long wire.
- Wide input voltage range (100VAC-270VAC).
- Very low no-load power consumption.
STMicroelectronics NUCLEO-N657X0-Q STM32 Nucleo-144 Development Board
SKU:
DEV0055
Original price was: ₹9,999.00.₹6,609.32Current price is: ₹6,609.32. (Excl. 18% GST)
- Brand: STMicroelectronics
- Type: MCU 32-Bit
- Core Processor: ARM Cortex-M55
- Mounting Type: Fixed
- Interconnect System: Arduino R3 Shield, ST Morpho, ST Zio
ESP32 30pin expansion board
SKU:
DEV0009-3
Original price was: ₹399.00.₹199.00Current price is: ₹199.00. (Excl. 18% GST)
- Pin Count: 30
- Dimensions: ~66mm x 62mm
- Weight: ~22g
- Interface: Screw terminals, pin headers
- Supported Boards: ESP32 30-pin development boards
- Color: Black
- Voltage Support: 3.3V/5V (via pins, ESP32 supply)
0.91 inch 128×32 Blue OLED Display Module with I2C/IIC Serial Interface (BLUE)
SKU:
DIS0014
Original price was: ₹249.00.₹164.00Current price is: ₹164.00. (Excl. 18% GST)
- Driving IC: SSD1306
- Operating Voltage: 3.3-5V
- Resolution Ratio: 128 x 32
- Text Color: Blue
- Background Color: Black
2.4 inch TFT Touch Screen LCD Display Shield 240×320
SKU:
DIS0003
Original price was: ₹978.00.₹565.00Current price is: ₹565.00. (Excl. 18% GST)
- Supports development boards such as Arduino UNO and Mega2560 for plug-in use without wiring
- 320X240 resolution, clear display, support for touch function
- Support 16-bit RGB 65K color display, display rich colors
- 8-bit parallel bus, faster than serial SPI refresh
- On-board 5V/3.3V level shifting IC, compatible with 5V/3.3V operating voltage
- Easy to expand the experiment with an SD card slot
NUCLEO-L412KB Development Board, Nucleo-32, 32-Bit, STM32L412KB MCU, Arduino, ST Morpho Compatible
SKU:
DEV0071
Original price was: ₹1,900.00.₹1,221.19Current price is: ₹1,221.19. (Excl. 18% GST)
- Product: NUCLEO-L412KB Development Board
- STM32 microcontrollers in 32-pin packages
- USB communication (LD1), power LED (LD2) and user LED (LD3) three LEDs
- Reset push-button
- ST-LINK USB VBUS or external sources (flexible power-supply options)
3.7V 600mAH (Lithium Polymer) Lipo Rechargeable Battery (Model – 602530)
SKU:
POW0013
Original price was: ₹299.00.₹109.00Current price is: ₹109.00. (Excl. 18% GST)
- Voltage: 3.7V
- Capacity: 600mAH
- Approx Size – 48x20x4 (in mm)
3.5 inch SPI TFT Screen Display Module Interface 480*320 without Touch
SKU:
DIS0013
Original price was: ₹1,439.83.₹846.61Current price is: ₹846.61. (Excl. 18% GST)
- TFT Display
- 320×480 Pixel
- ILI9488
- SPI based Operation (other protocol can be configured)
- Clear contrast and Output
- Has SD card slot
ESP32-C3 Development Board Dual Type-C WiFi Bluetooth BLE5.0 DevKitM-1 Core Board ESP32C3 Module
SKU:
DEV0053
Original price was: ₹2,599.00.₹746.61Current price is: ₹746.61. (Excl. 18% GST)
- Bluetooth LE: Bluetooth 5 Bluetooth
- mesh High power mode(18 dBm)
- Rate support 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
- Advertising Extensions
3pin Thermal Thermistor Temperature Sensor Module
SKU:
SEN0094
Original price was: ₹159.00.₹36.00Current price is: ₹36.00. (Excl. 18% GST)
- Adopt the NTC thermistor sensor, sensitivity is good
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma.
- With potentiometer to adjust the temperature detection threshold
- Working voltage: 3.3 V to 5 V
- Output form: digital switch output (0 and 1)
- It has a fixed bolt hole, convenient installation
13.56Mhz MFRC-522 RC522 RFID + S50 Card + Keychain(Original Chip)
SKU:
SEN0178
Original price was: ₹141.93.₹65.00Current price is: ₹65.00. (Excl. 18% GST)
- Voltage: DC 3.3V (Do not use 5V supply)
- Operating Current :13-26mA
- Idle Current :10-13mA
- Operating Frequency: 13.56MHz
- Highly integrated analog circuitry to demodulate and decode responses
- Supports ISO/IEC 14443 A/MIFARE
- Typical operating distance in reading/Write mode up to 50 mm
ECG Electrode
SKU:
SEN0161
Original price was: ₹27.39.₹14.00Current price is: ₹14.00. (Excl. 18% GST)
- Different base materials, sizes, and connections
- Monitoring electrode with foam tape and radiolucent stud.
- ECG Electrode with convenient abrader.
- ECG Electrode for monitoring applications requiring high adhesion.
- Adhesive foam tape backing and proprietary sticky gel ensure excellent skin contact.
- Remains fresh for 30 days out of the bag.
NUCLEO-G0B1RE STM32G0B1RE MCU Nucleo-64 Development Board
SKU:
DEV0089
Original price was: ₹5,999.00.₹1,439.83Current price is: ₹1,439.83. (Excl. 18% GST)
- Versatile Microcontroller: Powered by the STM32G0B1RE MCU in LQFP64 package, perfect for diverse applications.
- Efficient Power Management: Options for external or internal SMPS to optimize power consumption during operation.
- Seamless Connectivity: ARDUINO Uno V3 expansion and ST morpho headers for easy integration with a wide range of shields and modules.
- Comprehensive Software Support: Access to free software libraries and examples through the STM32Cube MCU Package, with support for various IDEs like IAR Embedded Workbench, MDK-ARM, and STM32CubeIDE.
- Integrated Debugging Tools: Built-in ST-LINK debugger/programmer, eliminating the need for external probes.
2.4 Inch Touch Screen TFT Display Shield with SD Card Slot
SKU:
DIS0008-1
Original price was: ₹899.00.₹499.00Current price is: ₹499.00. (Excl. 18% GST)
- 2.4″ Touch LCD TFT display module for Arduino
- 240*320 pixels resolution
- Ability to display 262000 different colors
- The shield comes equipped with a microSD card slot.
- SPFD5408 controller with built-in video RAM buffer
Official 7Semi VL53L1X ToF Distance Sensor Breakout – 4 Meter
SKU:
SEN0212
Original price was: ₹999.00.₹566.95Current price is: ₹566.95. (Excl. 18% GST)
- VL53L1X Time-of-Flight (ToF) sensor breakout for distance measurement.
- High-Precision Ranging – Measures distances up to 4 meters with ±5% accuracy and 1mm resolution.
- Fast Response – Supports measurement frequencies up to 50 Hz for real-time applications.
- I²C Communication – Simple digital interface for integration with microcontrollers and embedded systems.
- Compact & Reliable – Small breakout design with stable operation under varying lighting conditions.
- Wide Applications – Ideal for robotics, drones, autonomous navigation, smart sensing, and IoT devices.
