STMicroelectronics NUCLEO-N657X0-Q STM32 Nucleo-144 Development Board
- Brand: STMicroelectronics
- Type: MCU 32-Bit
- Core Processor: ARM Cortex-M55
- Mounting Type: Fixed
- Interconnect System: Arduino R3 Shield, ST Morpho, ST Zio
AI-01 Small Intelligent AI Voice Dialogue Module Kit with ESP32 Development Board Including Microphone and Speaker
- Supports up to 50 offline voice commands
- Built-in ESP32-C2 WiFi chip with RISC-V core
- Integrates with large language models
- Expandable via rich hardware interfaces
- Includes mic, speaker, and pin headers
- Ideal for IoT, automation, and AI prototyping
3M GPS GLONASS GNSS Antenna with SMA Male Connector
- The antenna assembly consists of a patch antenna for receiving GNSS signals and a preamplifier for signal amplification.
- Power supply to the antenna preamplifier must be provided by the application on the same RF signal trace as the GNSS RF signal is carried to the application.
- The antenna has an internal magnet so that it can be fixed on a metallic surface.
- Easy to use an antenna. Does not require RF or antenna knowledge.
50CM SMA Female to U.FL/IPX Interface Cable
- 20 inches/ 50cm lengths of M.2(NGFF) U.FL to RP-SMA antenna connector adapter cable. Extra thick (1.11mm) coaxial pigtail Cable.
- Note: be used for M.2 (NGFF) Interface. Cannot be used for MINI PCI-E interface
Official Arduino UNO EK (एक) R4 Minima ABX00080_IN – Made in India
- Official Arduino UNO EK (एक) R4 Minima – Made in India
- Powered by Renesas RA4M1 Arm® Cortex®-M4 32-bit processor @ 48MHz
- 14 digital I/O pins (6 PWM outputs) and 6 analog inputs
- 5V logic compatibility for seamless integration with existing shields and sensors
- USB-C connector for faster programming and communication
- Increased memory and performance for complex projects
- Fully compatible with Arduino IDE and existing UNO shields
- Made in India for local manufacturing and accessibility
Official Arduino UNO Q Single Board Computer ABX00162(2GB RAM 16GB eMMC)
- Processor: Qualcomm Dragonwing QRB2210
- Microcontroller (MCU): STM32U585
- RAM/Storage: 2GB/16GB
- Connectivity: Wi-Fi 5, BT 5.1
- Debian OS : Linux & Zephyr
SanDisk Micro SD Memory Card 16GB, Class-10
- Memory Size : 16 Gigabyte
- Card Type : Micro SD
- Data transfer Speed : up to 98MB/s
- Class : 10
LM2577S+LM2596S Automatic Buck-Boost Power Module (Solar Energy Step-down and Step- up Module) (RED)
- Input : 3.5-28 Volts.
- Output : 1.25 Volts – 26 Volts.
- Output voltage independent of input voltage (3.5V-28V input, any value output 1.25V-26V).
- Maximum input current 3 Ampere.
- Maximum output 3 Ampere.
- Rated input 1 Ampere, Output 1 Ampere.
- Size : 5.2cm x 3.8cm x 2cm
ZK-4KX DC Step Up and Step Down Adjustable Voltage Regulator with Dual Display (DC DC Buck Boost Converter CC CV 0.5-30V 4A Adjustable)
- Model: ZK-4KX
- Material: Fiber glass board, Electronic component
- Input Voltage: 5.0-30v
- Output Voltage: 0.5-30v
- Voltage Display resolution: 0.01V
- Current Display resolution: 0.001A
- Conversion Efficiency: about 88%
- Output Power: Natural heat dissipation 35W; Strengthen heat dissipation 50W
- Output Current: It can work stably at 3A for a long time, and can reach 4A under enhanced heat dissipation.
- Soft Start: Yes (The soft start may fail when it starts with high power and load module.)
Official Texas Instruments TMDSDOCK28335 – Development Boards & Kits – TMS320 TMS320F28335 Experimenter Kit
- TMDSCNCD28335: TMS320F28335 DIMM100 based controlCARD
- DIMM100 Docking Station baseboard with DIMM100 controlCARD female connector
- XDS100v1 USB-to-JTAG Debug Probe enables real-time in-system programming and debugging
- Header pin access to key MCU signals – including most major digital IO and analog inputs
- Breadboard area for customizable routing/prototyping
- Board power can be provided by the provided USB cable or a 5V barrel supply
- Hardware Files are in C2000Ware at boards\controlCARDs\TMDSCNCD28335
2.4 Inch Touch Screen TFT Display Shield with SD Card Slot
- 2.4″ Touch LCD TFT display module for Arduino
- 240*320 pixels resolution
- Ability to display 262000 different colors
- The shield comes equipped with a microSD card slot.
- SPFD5408 controller with built-in video RAM buffer
XL6009 DC-DC Step-Up Converter (DC-DC Boost Power Supply Module)
- Wide input voltage 3V ~ 32V, optimum operating voltage range is 5 ~ 32V;
- Wide Output voltage 5V ~ 35V;
- Built-4A efficient MOSFET switches enable efficiency up to 94%; (LM2577 current is 3A)
- High switching frequency 400KHz, can use a small-capacity filter capacitors that can achieve very good results, the ripple smaller and smaller. (LM2577 frequency only 50KHz)
LM2596S DC-DC Buck Converter Step Down Module – Variable Voltage (3A BUCK 3-40V TO 1.5-35V)
- Input Voltage(VDC): 4 ~ 40.
- Output Voltage(VDC): 1.3 ~ 37.
- Output Current: 2A Rated, ( 3A maximum with heat sink).
- Switching Frequency: 150 kHz.
- Input reverse polarity protection.
- Built-in output short protection function.
Official LAUNCHXL-F28027F C2000 Piccolo MCU F28027F LaunchPad™ Development Kit
-
Low-cost evaluation and development board for InstaSPIN-FOC enabled F2802x series MCUs
-
Part of the Texas Instruments LaunchPad™ ecosystem – compact, standardized, and easy-to-use
-
Powered by C2000 Piccolo F28027F MCU for high-performance real-time motor control
-
Supports InstaSPIN-FOC technology for efficient field-oriented motor control without detailed motor parameters
-
Compatible with TI BoosterPacks for quick prototyping and functionality expansion
-
Integrated on-board emulator for programming and debugging
-
Provides GPIO access and standard connectors for external peripherals
-
Backed by MotorWare software tools for simplified development and faster time-to-market
-
Ideal for motor drives, robotics, digital power supplies, renewable energy systems, and embedded control applications
XL4015 5A Constant Current / Voltage LED Drives Lithium Battery Charging Module
-
High-efficiency DC-DC buck (step-down) power supply based on XL4015 chip
-
Supports 0–5A adjustable output current with constant current (CC) and constant voltage (CV) modes
-
Operates at 300 KHz fixed frequency PWM for stable performance
-
Low ripple (<50mV) ensures clean and reliable output
-
Can be used as a lithium battery charger (Li-ion, LiPo) with CC/CV charging function
-
Suitable as an LED driver, step-down regulator, or battery charging module
-
Adjustable output voltage & current for flexible applications
GY-53 VL53L0X Laser ToF Flight Time Ranging Sensor Module (High Quality)
- VL53L0X 3-in-1 ranging and gesture detection sensor
- Regulator: 5 to 2.8V range input voltage (output voltage: 2.8V)
- VL53L0X signal interface level shifter
- Serial Port PWM Output
- True distance measurement independent of target size and reflectance
- Breakout board, easy to integrate into the customer device
- Allows basic gesture recognition use case.
Official Texas Instruments LP-MSPM0L1117 LaunchPad™ Development Kit for 32MHz Arm® Cortex®-M0+ MCU
-
Based on MSPM0L1117 Arm® Cortex-M0+ MCU
-
Compact, low-cost evaluation module (EVM)
-
On-board debug probe for programming, debugging & energy measurement
-
Includes 2 push buttons and 2 user LEDs for quick testing
-
Access to 40+ GPIO pins for external interfacing
-
Supports ADC inputs with low-pass filter placeholders for analog accuracy
-
Optimized for low-power and IoT applications
-
Fully supported by TI MSPM0 software ecosystem (Code Composer Studio™, drivers, libraries, examples)
-
Suitable for students, hobbyists, and professional developers
-
Ideal for IoT devices, automation, consumer electronics, and embedded projects
GY-530 VL53LOX Laser ToF Flight Time Ranging Sensor Module (Low Cost)
-
Based on VL53L0X Time-of-Flight (ToF) laser ranging sensor
-
Measures distance up to 2 meters with 1 mm resolution
-
I²C interface for easy connection with Arduino, ESP32, STM32, Raspberry Pi
-
Works reliably across varied surfaces and lighting conditions
-
Compact design and low power consumption for embedded projects
-
Ideal for robotics, IoT devices, automation, and gesture recognition
-
Provides more accurate results than IR or ultrasonic sensors
-
Suitable for obstacle avoidance, 3D mapping, and object detection
Unsoldered Black STM32F401CCU6 Development Board (Type C)
- Model: STM32F401CCU6
- Memories: Up to 256 Kbytes of Flash memory, 512 bytes of OTP memory, Up to 64 Kbytes of SRAM
- 1× 12-bit, 2.4 MSPS A/D converter: Up to 16 channels
- General-purpose DMA: 16-stream DMA controllers with FIFOs and burst support
- 256 Kbytes of Flash memory
- 84 MHz CPU with ART Accelerator
- Item Type: Other Board
- Based On: STM32
- USB Connector: Type-C
- Product Size: 53x21x8mm
- Weight (g): 7
Unsoldered Black STM32F401CCU6 Development Board (Micro USB)
- 100% Original brand new and high-quality STM32 Board
- 84 MHz work frequency.
- 256K flash memory,64K SRAM.
- 1.7-3.6V power, I/O.
- 4-26MHz crystal.
- Onboard the Type-C USB interface, you can give the board power supply and USB communication.
