NUCLEO-H723ZG STM32H723ZG MCU STM32 Nucleo-144 Development Board
- Manufacturer Part No: NUCLEO-H723ZG
- Manufacturer: STMicroelectronics
- Product Category: Development Boards & Kits – ARM
- Series: STM32H7
- MCU Type: 32-Bit
- Core: ARM Cortex M7
- Platform: Nucleo-144
- Tool Is For Evaluation Of: STM32H723ZGT6U
- Brand: STMicroelectronics
- Interconnect System: Arduino R3 Shield, ST Morpho, ST Zio
- Interface Type: USB
- Operating Supply Voltage: 3.3V, 5V, 7V to 12V
1×4 4 Key Matrix Membrane Switch Keypad Keyboard Control Panel SCM Extended Keyboard
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- Mount Style: Self-Adherence
- Max. Circuit Rating: 35 VDC, 100 mA.
- Contact Bounce : <=5ms
- Life Expectancy : 1 million closures
- Operation Temperature : -20 to +40 °C
TTP223 Touch Button Module Self-Locking Inching Capacitive Switch
- Input Voltage : 2 Volt – 5.5 Volts DC.
- The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V.
- Sensitivity can adjust by the capacitance(0~50pF).
- Stable touching detection of the human body for replacing traditional direct switch key.
- Provides direct mode toggle mode by pad option(TOG pin).
- After power-on have about 0.5sec stable-time, during the time do not touch the keypad, and the function is disabled.
- Auto calibration and Re-calibration period is about 4.0 sec when the key has not be touched.
315MHz Four Button Wireless Remote Control Kit without Battery
- No. of the channel: 4
- Operating mode: Non-Locking
- Receiver Operating voltage: DC 5V.
- Receiver sensitivity is: -98dB.
- Transmitter Operating voltage: DC 12V
- Transmitting frequency: 315 MHz.
- Transmitter Operating current: 10mA at 12V.
- Transmitter Radiated power: 10mW at 12V.
- Transmission distance (m): 3 to 5.
2.54mm Single Row Male 1X40 Pin Header Strip (Red)
- Number of Pins: 40
- Lead Pitch: 2.54mm
- Color: Red
- Pin Height: 6 mm
- Width: 2.4 mm
- Height: 11.2 mm
- Weight: 2 gm
Male to Female Dupont Line 40 Pin 30cm 24AWG
- 40P colored jumper wires
- Length: 300mm
- Weight: 30 gm
- Compatible with 2.54mm spacing pin headers
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
Female to Female Jumper Wires 40 Pin Dupont Jumper Wire 30CM
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
- A popular choice for construction or repair
- Be used for the electronic project and Genuine Arduino product
- Flexible Breadboard Jumper Cable Wire allows you to plug and unplug easily for prototyping.
Matrix LED Shield V1.0.0 for WEMOS D1 Mini 8×8 Matrix Lattice Red LED Module
- 8×8 lattice red LED module
- The module requires a 3.3V and 5V power supply (3.3V and 5V need to be powered at the same time)
- LED dot matrix glows red
- 8 step adjustable intensity
KY-040 Rotary Encoder Module for Arduino
- Model : KY-040.
- Type : Incremental Encoder.
- Cycles per revolution (CPR) : 20.
- Working voltage : 0 – 5V.
- Material : PCB + Brass.
- Mounting Nut Thread diameter: 6.6mm
- Weight : 10 gm.
Texas Instruments LAUNCHXL-F280039C TMS320F280039C LaunchPad Development Kit
-
TMS320F280039C with 120 MHz C28x CPU, FPU, TMU, and 120 MHz CLA
-
384 KB flash memory and multiple peripherals
-
Three 12-bit ADCs and 16 PWM channels
-
Supports CAN (DCAN) and CAN-FD (MCAN)
-
On-board XDS110 debug probe for programming and debugging
-
100-pin LaunchPad compatible with BoosterPack modules
-
Power domain isolation for safe real-time debugging
-
On-board CAN transceiver and connector
-
Two eQEP encoder interface connectors
-
FSI interface connector
-
Hardware design files available
0.96 Inch 80*160 IPS TFT Module 8pin (with GND VCC) ST7735 Chip
- Product Type: TFT
- Resolution: 80*160
- Display Size: 0.96 Inch
- No.of Pins: 8
TTGO SIM7600E-H Module ESP32- WROVER-B Chip WiFi Bluetooth 18560 Battery Holder Solar Charge Development Board CH9102F Chip
- Main chip:ESP32 WROVER-E
- Interface: USB, SD Card, Solar Input interface
- Car Clock:40MHz
- Button: Reset, Power switch
- Antenna: SIM Antenna，GPS Antenna
- Operating Temperature Range:-40-85 degrees
2.8 inch SPI Touch Screen Module TFT Interface 240*320 with Touch
-
2.8 inch TFT LCD Display with 240×320 pixel resolution
-
SPI Interface for fast communication and fewer GPIO pins
-
Resistive Touch Screen with XPT2046 controller
-
ILI9341 Driver IC ensures stable and clear performance
-
Compatible with Arduino, ESP32, STM32, Raspberry Pi
-
Works on 3.3V–5V with onboard regulator
-
Optional SD Card Slot for graphics & data storage
-
Ideal for DIY projects, IoT devices, handheld gadgets, and embedded systems
STMicroelectronics STM32F429I-DISC1 Discovery MCU Development Kit with STM32F429ZI MCU, 2.4″ Qvga LCD 3-axis Mems Motion Sensor
-
Microcontroller: STM32F429ZIT6 (ARM® Cortex®-M4, 180 MHz, 2 MB Flash, 256 KB SRAM)
-
Integrated Debugger: ST-LINK/V2 embedded debug tool – no external programmer needed
-
Display: 2.4″ QVGA TFT LCD for graphical applications
-
Memory: 64 Mbit external SDRAM for memory-intensive projects
-
Sensors: ST MEMS gyroscope for motion detection and orientation sensing
-
USB Connectivity: USB OTG micro-AB connector (host & device support)
-
User Interface: Multiple LEDs and pushbuttons for quick prototyping
-
I/O Access: Easy access to MCU pins for hardware expansion
-
Software Support: Compatible with STM32Cube firmware, middleware, and examples
-
Applications: IoT devices, industrial controllers, multimedia systems, robotics, and embedded projects
Official Nordic Semiconductor NRF5340-DK Development Kit nRF5340 Bluetooth Low Energy/SoC
-
Official Nordic Semiconductor Development Kit for the nRF5340 dual-core ARM® Cortex®-M33 SoC.
-
Supports Bluetooth Low Energy with 2 Mbps, Advertising Extensions, and Long Range.
-
Concurrent Bluetooth LE, Bluetooth Mesh, Thread, and Zigbee operation.
-
Additional protocol support: NFC, ANT, 802.15.4, and 2.4 GHz proprietary.
-
Bundled NFC antenna for quick NFC-A tag testing.
-
Integrated SEGGER J-Link debugger for on-board and external target programming/debugging.
-
Arduino Uno Rev3 compatible headers for expansion with shields.
-
Multiple GPIOs, buttons, and LEDs for hardware prototyping.
-
Fully supported by the nRF Connect SDK for fast software development.
-
Ideal for IoT, smart home, wearables, and industrial applications.
Official MSP-EXP430FR2355 – MSP430FR2355 LaunchPad Development Kit
-
Powered by MSP430FR2355 ultra-low-power Value Line MCU
-
Includes 32KB FRAM & 4KB SRAM for flexible memory allocation
-
On-board debug probe for easy programming and energy measurement
-
Features 12-bit ADC, DACs, PGAs & enhanced comparators (eCOMPs)
-
Smart Analog Combo for advanced signal chain prototyping
-
Ambient light sensor & external analog connector included
-
Two user-programmable buttons and two LEDs
-
Ideal for data logging, sensor applications, and low-power systems
-
24MHz operation for faster processing in energy-constrained applications
-
Compatible with TI’s Code Composer Studio™ and IAR Embedded Workbench
HC-05 6pin Bluetooth Module with Button
- Profiles: Bluetooth serial port Profile
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK(Gaussian Frequency Shift Keying)
- Emission power: ≤4dBm, Class 2
- Sensitivity: ≤-84dBm at 0.1% BER
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
- Security: Authentication and encryption
- Power supply: +3.3VDC 50mA
- Working temperature: -20 ~ +75Centigrade
- Dimension: 26.9mm x 13mm x 2.2 mm
3.7V 600mAH (Lithium Polymer) Lipo Rechargeable Battery (Model – 602530)
- Voltage: 3.7V
- Capacity: 600mAH
- Approx Size – 48x20x4 (in mm)
MAX485 TTL to RS485 Converter Module
- On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver.
- A low power consumption for the RS-485 communication
- Onboard then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring.
- Slew-rate limited transceiver
- All pins of the chip have been lead to can be controlled through the microcontroller.
- Convenient RS-485 communication wiring
- Multiple Units can be connected to the same RS-485 bus wiring.
- All Chip pins are brought out for proper controls
GY-MAX30102 Pulse Oximeter Heart Rate Sensor Module
- Heart-Rate Monitor and Pulse Oximeter Biosensor in LED Reflective Solution
- Tiny 5.6mm x 3.3mm x 1.55mm 14-Pin Optical Module
- Integrated Cover Glass for Optimal, Robust Performance
- Ultra-Low Power Operation for Mobile Devices
- Programmable Sample Rate and LED Current for Power Savings
- Low-Power Heart-Rate Monitor (< 1mW)
- Ultra-Low Shutdown Current (0.7µA, typ)
- Fast Data Output Capability
- High Sample Rates
- Robust Motion Artifact Resilience
- High SNR
- -40°C to +85°C Operating Temperature Range
