GPS NEO-7M Satellite Positioning Module Development Board for Arduino STM32 51(with Battery)
- On-board with ceramic antenna,
- Welded with an SMA head
- Reserved serial port interface
- Comes with a signal indicator
GPS NEO-M8N Satellite Positioning Module Development Board for Arduino STM32 51(with Battery)
- Model: NEO M8N GPS Module
- Default baud rate: 9600.
- Supply Voltage: 3V to 5V
- Antenna size 25*25mm
- Module size 25mm*35mm
- Mounting aperture 3mm
SMA Adapter SMA Jack to SMA Jack Straight (SMA Female to SMA Female Adapter)
- SMA Female to SMA Female RF Connector
- Type: Female to Female
- Color: Gold Tone
- Max Frequency:18 GHz
801S Vibration Shock Sensor Sensitivity Adjustable
- Has a signal output instruction
- When the output valid signal is high, the light goes out
- The sensitivity is adjustable (fine-tuning)
- The wide detection range of vibration, no direction
- With mounting holes, firmware installation is flexible and convenient.
SW-420 Normally Closed Alarm Vibration Sensor Module
- the use of the company’s production of SW-420 normally closed type vibration sensors.
- compactor output signal clean wave well, driving ability,
- 15mA rated voltage
- 3.3V-5V output
- digital switching output (0 and 1)
- a bolt-hole for easy installation small Board
- PCB dimensions: 32 mm x 14 mm using wide LM393 voltage compactor
SW1801P 3pin Normally open vibration sensor module
- The working voltage of 3.3V-5V.
- Using the company’s high-sensitivity vibration switch, the default with SW-18015P vibration sensor.
- The comparator output, the signal clean, good waveform, driving ability, more than 15mA
- With a fixed bolt hole, easy to install.
- The use of wide voltage LM393 comparator.
SW1801P 4pin Normally open vibration sensor module
- The working voltage of 3.3V-5V.
- Using the company’s high-sensitivity vibration switch, the default with SW-18015P vibration sensor.
- The comparator output, the signal clean, good waveform, driving ability, more than 15mA
- With a fixed bolt hole, easy to install.
- The use of wide voltage LM393 comparator.
3-Way Soil Meter For Moisture Light Intensity and pH Testing Meter
- Three different soil test meters in one device; Measures moisture, pH/Acidity, and light.
- Measures moisture, pH/Acidity, and light.
- 100% Accuracy; Easy to read moisture, pH and light levels.
- Compact, portable & easy to use, just plug and use.
- Compact soil meter works indoor/outdoors.
4 in 1 Soil PH Meter Soil Tester PH Moisture Meter Temperature Sunlight Measurement Analysis Acidity Alkali (Without Battery)
- 4 Different Reading on One Screen
- On-Screen Battery Level Indicator
- Unit change Switch
- 200 mm probe to measure the root level
- Yellow Backlight Screen
- Power sleep mode for long battery life
- Portable and Plug and Play device
GY-530 VL53LOX Laser ToF Flight Time Ranging Sensor Module (Low Cost)
-
Based on VL53L0X Time-of-Flight (ToF) laser ranging sensor
-
Measures distance up to 2 meters with 1 mm resolution
-
I²C interface for easy connection with Arduino, ESP32, STM32, Raspberry Pi
-
Works reliably across varied surfaces and lighting conditions
-
Compact design and low power consumption for embedded projects
-
Ideal for robotics, IoT devices, automation, and gesture recognition
-
Provides more accurate results than IR or ultrasonic sensors
-
Suitable for obstacle avoidance, 3D mapping, and object detection
GY-53 VL53L0X Laser ToF Flight Time Ranging Sensor Module (High Quality)
- VL53L0X 3-in-1 ranging and gesture detection sensor
- Regulator: 5 to 2.8V range input voltage (output voltage: 2.8V)
- VL53L0X signal interface level shifter
- Serial Port PWM Output
- True distance measurement independent of target size and reflectance
- Breakout board, easy to integrate into the customer device
- Allows basic gesture recognition use case.
Official 7Semi DS18B20 Waterproof Temperature Sensor Probe 1m Cable
-
Temperature threshold programmable and non-volatile
-
Sensor type local
-
Single measurement channel
-
Supports parasite power
-
1-Wire communication interface
-
Accuracy ±0.5°C
-
Supports multiple devices on the same bus
-
Temperature resolution selectable 9, 10, 11, or 12 bits
-
Operating temperature range from −55°C to +125°C
7Semi BNO055 9-DOF Absolute Orientation Sensor Breakout I2C Qwiic
-
9-axis absolute orientation for accurate 3D motion tracking
-
Bosch BNO055 smart sensor with accelerometer, gyroscope, and magnetometer
-
Advanced sensor fusion for stable and precise orientation data
-
I2C interface for easy integration with microcontrollers
-
Supports 3.3V and 5V operating voltage
-
Low power consumption for longer battery life
Official 7Semi SHT40 Humidity and Temperature Sensor Probe
-
High-accuracy digital temperature and humidity sensor
-
Wide measurement range for extreme environments
-
Ultra-low power consumption for battery-operated systems
-
Stainless steel protective housing with breathable design
-
I2C interface for easy system integration
-
Factory calibrated with NIST traceability
-
Built-in heater for stable humidity readings
-
Designed for harsh and industrial environments
Official 7Semi SHT45 Digital Humidity and Temperature Sensor Probe 0.1C Accuracy 1% RH 16bit I2C
- Digital output, I2C interface (I2C address 0x44)
- Fully functional in condensing environment
- Variable power heater
- NIST traceability
- Breatable shell
- Corrosion resistance
- High temperature resistance
- Large air permeability, fast gas humidity flow and exchange rate, uniform divergence.
- Excellent ability of anti-dust, anti-corrosion and waterproof (IP65）
Official 7Semi SCD40 CO2, Temperature and Humidity Sensor Breakout I2C
- Photoacoustic CO2 sensor technology (carbon dioxide sensor)
- Integrated temperature and humidity sensor
- Measurement range: 400 ppm – 2000 ppm
- Accuracy: +-(50 ppm + 5 % of reading)
- Current consumption: 17 mA (meas. rate = 5 s) / 0.5 mA (meas. rate = 5 min)
- Fully calibrated and linearized
- I2C digital interface
Official 7Semi SCD41 High Accuracy CO2, Temperature and Humidity Sensor Breakout I2C
- Photoacoustic CO2 sensor technology
- Integrated temperature and humidity sensor
- Measurement range: 400 ppm – 5000 ppm
- Accuracy: +-(50 ppm + 5 % of reading)
- Current consumption: 17 mA (meas. rate = 5 s) / 0.5 mA (meas. rate = 5 min)
- Fully calibrated and linearized
- I2C digital interface
Official 7Semi VL53L1X ToF Distance Sensor Breakout – 4 Meter
- VL53L1X Time-of-Flight (ToF) sensor breakout for distance measurement.
- High-Precision Ranging – Measures distances up to 4 meters with ±5% accuracy and 1mm resolution.
- Fast Response – Supports measurement frequencies up to 50 Hz for real-time applications.
- I²C Communication – Simple digital interface for integration with microcontrollers and embedded systems.
- Compact & Reliable – Small breakout design with stable operation under varying lighting conditions.
- Wide Applications – Ideal for robotics, drones, autonomous navigation, smart sensing, and IoT devices.
Official 7Semi NEO-M9N GPS Breakout, Precision GNSS Positioning
-
High-precision multi-GNSS GPS breakout module
-
Supports GPS, GLONASS, Galileo, and BeiDou
-
Fast position update rate up to 25 Hz
-
3.3V operating voltage
-
I2C and UART communication interfaces
-
Low power consumption for battery-powered projects
-
Compact design for space-constrained applications
-
Ideal for drones, robotics, navigation, and IoT tracking
Official 7SEMI PT100 RTD Temperature Sensor Probe 3-wire 1m -70~300C
-
High-precision PT100 RTD temperature sensor probe
-
Wide temperature measurement range from −70°C to +300°C
-
Uses premium JUMO platinum RTD chip for reliable accuracy
-
3-wire configuration for improved measurement stability
-
Complies with IEC 60751 Class A / F0.15 standards
-
Stainless steel probe with waterproof construction
-
2-inch probe length with 1-meter durable cable
-
Suitable for industrial, laboratory, HVAC, and process control applications
-
Designed for long-term stability and harsh environments
-
Ideal for professional and precision temperature monitoring
