2.0 inch LCD color screen TFT SPI Module
- Display Size: 2.0″
- Driver IC: ILI9225
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 176 x 220
- PCB Size (mm): 62×38 (LxW)
- Interface Type: SPI
10pcs 20cm Test Hook Clips For Logic Analyzer USB Saleae 24M 24MHz 8CH 10-Way (Random Colour)
- Cable Length: 20CM
- Weight: 20 g
- Cable Color: Multicolor
NRF24L01+ Wireless Module 2.4G
- Operating Frequency: 2.4 GHz ISM band
- Voltage Range: 1.9V to 3.6V
- Antenna: Integrated or external, depending on the module version
- Interfaces: SPI
- Operating Temperature: Typically -40°C to +85°C
ECG/EKG/EMG Wire
- Cord length: 40 cm.
- 3-lead line: buckle
Official Silicon Labs EFR32xG26 Explorer Kit (xG26-EK2709A) (BRD2709A)
- Based on EFR32xG26 2.4 GHz Wireless SoC
- +10 dBm, 1536 kB flash, 256 kB RAM, QFN48
- Two LEDs and two push buttons
- Reset button
- USB connector for power and debug connection
- On-board SEGGER J-Link debugger
- Virtual COM port
- Packet Trace Interface (PTI)
- Breakout pads for GPIO access and connection to external hardware
- Third-party add-on connectors
- mikroBUS socket
- Qwiic® connector
GY-530 VL53LOX Laser ToF Flight Time Ranging Sensor Module (Low Cost)
-
Based on VL53L0X Time-of-Flight (ToF) laser ranging sensor
-
Measures distance up to 2 meters with 1 mm resolution
-
I²C interface for easy connection with Arduino, ESP32, STM32, Raspberry Pi
-
Works reliably across varied surfaces and lighting conditions
-
Compact design and low power consumption for embedded projects
-
Ideal for robotics, IoT devices, automation, and gesture recognition
-
Provides more accurate results than IR or ultrasonic sensors
-
Suitable for obstacle avoidance, 3D mapping, and object detection
HC-06 4pin Bluetooth Module (Slave) Without Button
Original price was: ₹592.37.₹422.88Current price is: ₹422.88. (Excl. 18% GST)- Bases at CSR BC04 Bluetooth technology.
- with build-in 2.4GHz PCB antenna
- It’s at the Bluetooth class 2 power level.
- Range test: 10 meters
- Operating voltage: 3.3V to 6V DC
- Operating current in pairing is in the range of 30~40mA.
ESP-WROOM-32 ESP 32S WIFI Bluetooth Development Board (CP2102 + 38PIN + Micro)
- Ultra-low-power management.
- Version: 1.1
- 4 MB Flash.
- Current: 80 mA.
- Supply Voltage: 2.2 V ~ 3.6 V.
- Data Rate: 54 Mbps.
- Frequency: 2.4 GHz.
NodeMcu Lua WIFI V2 Internet Development Board Based on ESP8266 (CP2102 + 30PIN + Micro)
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
TTP226 8-way Capacitive Touch Switch Module
- Onboard 8 key TTP226 capacitive touch induction IC.
- Onboard 8-way level indicator.
- Working voltage: 2.4 to 5.5 V.
- Modules, you can set the output mode, key output mode, the longest time and fast/low power output
TTGOT-Display ESP32 Development Board 1.14 Inch LCD Control Board 4MB CH9102F Chip
- MCU: ESP32 Xtensa dual-core LX6 microprocessor
- Wireless Connectivity: Wi-Fi 802.11 b/ g/ n, BL V4.2+BLE
- Programming Platform: Arduino-ide, Micropython
- Serial chip: CH9102
- Optional Flash: 4M/16M
- Onboard functions Buttons: l006+I007, battery power detection
NRF52840-DK – nRF52840 Bluetooth 5 Bluetooth mesh Thread Zigbee 802.15.4 ANT 2.4 GHz Development Board
-
Supports Bluetooth 5, Bluetooth Mesh, Thread, Zigbee, 802.15.4, ANT, and 2.4 GHz proprietary protocols.
-
Powered by the nRF52840 SoC with support for nRF52811 development.
-
Includes NFC antenna for quick NFC-A tag functionality.
-
All GPIOs accessible via edge connectors and headers.
-
Equipped with 4 buttons and 4 LEDs for easy input/output testing.
-
Arduino Uno Rev 3 compatible for 3rd-party shield integration.
-
On-board SEGGER J-Link debugger for programming and debugging.
-
Debug Out header for external SoC debugging.
-
Compatible with Power Profiler Kit for power consumption analysis.
-
Ideal for IoT, wireless device prototyping, and development.
858D Hot Air Soldering Station with Display
- Body type: Full metalized Powdered coated.
- Controller: Micro Controller based with 7 segment display with SET and READ mode.
- ESD: Yes safe
- Temperature setting: Push-button
- Fan setting: Knob type
- Blower Cut-off: Automatic on keeping it in the provided cradle.
Official 7Semi UART Mux Demux Breakout Board – 4 Channel (SN74LV4052)
-
Official 7Semi UART Mux Demux Breakout Board
-
Based on SN74LV4052 dual 4-channel multiplexer
-
Switch multiple UART devices using one UART port
-
Wide operating voltage range 1.65V – 5.5V
-
Supports both analog and digital signals
-
Low power and fast switching performance
-
Breadboard-friendly and easy to integrate
-
Ideal for IoT, robotics, and embedded systems
KY-037 Sound Sensor Module
- Main chip: LM393, Electret condenser microphone
- Working voltage: DC 3.3-5V
- Induction distance is 0.5M
- Signal output Indication
- Single channel signal output
- The output effective signal is low level.
Pro Micro ATmega32U4 5V/16MHz Mini MCU Leonardo
- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection
1.3 Inch I2C/IIC 4-Pin OLED Display Module (BLUE)
- Size: 1.3 inch
- Resolution: 128 x 64
- Controlling Chip: SSH1106
- Display Area: 21.74 x 10.86mm
- Driving Voltage: 3.3-5V
- Operating Temperature: -40~70 Celsius
- Interface Type: IIC
- Light Color: Blue
PL2303 PL2303HX USB To TTL(Serial) Converter Module (5 Pin)
- 500mA self-recovery fuse for protection
- Two data transmission indicator can monitor data transfer status in real time
- Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power
- Electrostatic package ensures the board will not be damaged before use
MSP-EXP430FR2433 – LaunchPad Development Kit (with Sensing MCU, LaunchPad, BoosterPack Connector)
- ULP FRAM technology based MSP430FR2433 16-bit MCU
- EnergyTrace Technology available for ultra-low-power debugging
- 20-pin LaunchPad kit standard leveraging the BoosterPack ecosystem
- On-board eZ-FET debug probe
- 2 buttons and 2 LEDs for user interaction
TTGO T-SIM7000G Module ESP32- WROVER-B Chip WiFi Bluetooth 18560 Battery Holder Solar Charge Development Board CH9102F Chip
- Main chip: ESP32-WROVER-B, SIM7000G
- Flash Memory:4M Flash / 8M PSRAM
- Interface: USB, SD Card, Solar Input interface
- Car Clock:40MHz
- Button: Reset, Power switch
- SIM Card Size: Nano SIM Card
- Antenna: SIM Antenna,GPS Antenna
- Operating Temperature Range:-40-85 degrees
